TruPunch 5000

TruPunch 5000

Application	Punching and forming
Category	High-End machine
Working range	- 2550 mm x 1280 mm or - 3070 mm x 1660 mm
Tools, Linear magazine	- 18 tools with 3 clamps - 21 tools with 4 clamps
Max. sheet thickness	8 mm
Automation	From semi-automatic loading to fully-automatic manufacturing cell, shredding scrap skeletons

The acceleration figures make the TruPunch 5000 so efficient. We achieve these figures by using lightweight components and tool cartridges. The X-axis accelerates at 2 g to a maximum speed of 100 m/min.

An additional feature is the gantry drive on the Y-axis: Two separate drive motors are synchronously controlled with no mechanical connection to provide high acceleration and accuracy.

With 330 revolutions per minute, it can orient tools in any position. It takes the TruPunch 5000 only 2.8 seconds to change tools. With the MultiTool, it takes only 0.3 seconds.

TruPunch 5000 punching head

Forming at close to punching speed
The TruPunch 5000 punches at a hit rate of up to 1,200 strokes/min or up to 2,800 strokes/min when marking. At the same time, the acceleration rate and the speed of C axis rotation have increased significantly; this, in turn, enables contouring and tapping at high speed.

• Hit rate: 1200 strokes per minute, 2800 when marking
• Rotation: The C axis rotates at 330 rdm
• High-speed forming: Variable forming height makes for short stroke lengths, forming almost at punching speed

Typical workpiece

Innovative tools
TRUMPF offers tools tailored to meet your specific requirements. The punch, stripper and die are monitored by sensors during tool change, thereby ensuring process reliability.
More

• Deburring: Roller deburring tool and deburring MultiTool displace the burr and chamfer the edges.
• MulitBend: Produce right-angled bends on outer and inner edges up to 25 mm
• MultiShear: By using this tool, it is virtually impossible to differentiate between a punched and a lasered edge
• Roller technology: Enables roller shearing, roller beading, roller offsetting and roller pinching

Online Help - E-shop for ordering spare parts
The open control system of the machine guarantees easy operation. The Online Help answers questions as they arise, the diagnostic concept registers faults and displays possible solutions in plain language. Teleservice via the built-in modem is a matter of course.

For the customer's convenience, an E-Shop is available for spare parts orders. The parts can be ordered both from the machine control or from a PC with Internet connection.
E-Shop Spare Parts

The right automation for all purposes

Automation - tailored for high productivity
Thanks to its modular automation concept, the TruPunch 5000 can be expanded into a system for fully automated operation, with every finished part being removed automatically.
More

Technical Data

	TruPunch 5000
Working area	2550 mm x 1280 mm	3070 mm x 1660 mm
Max. sheet thickness	8 mm	8 mm
Max. punching force	220 kN	220 kN
Max. stroke rate punching (E = 1 mm)	1200 1/min	1000 1/min
Max. stroke rate marking	approx. 2800 1/min	approx. 2800 1/min
Tools, linear magazine	18 tools with 3 clamps	21 tools with 4 clamps
Programmable part chute Max. part size	500 mm x 500 mm	500 mm x 500 mm
Space requirements	approx. 6760 mm x 6100 mm	approx. 7600 mm x 7000 mm