TruLaser Tube 3000

TruLaser Tube 3000

Application	Tube processing machine for cutting round tubes into sections
Category	Laser cutting center for round tubes
Working range	Tube length: 6000 mm (optional 9500 mm) Z beam guide axis: 150 mm Z-beam guide axis: 150 mm
Laser	TruFlow 2000, TruFlow 2700, TruFlow 3200

Catcher and presser foot

The TruLaser Tube 3000 laser cutting center makes highly productive and spatter-free cutting of round tubes possible. The universal tool is the laser, which functions without physical contact or force. It yields cutting edges with minimal roughness and with virtually no burr.

Catcher in the tube

Typical cutting tasks for the TruLaser Tube 3000 include: high quality round tubes made of stainless steel, requiring the best possible, clean and spatter-free quality of cut. The non-contact and force-free procedure also makes it possible to cut thin-wall tubes without deforming them.

Technical Data

	TruLaser Tube 3000
Working range	X-tube axis: 6500 mm (optional 9500 mm) Z-beam guide axis: 150 mm
Maximum travel speed	X-tube axis: 100 m/min Z-beam guide axis: 40 m/min A-rotation axis: 120 rpm
Accuracy¹	Positioning accuracy: ± 0,2 mm/0,015° Repeatability: ± 0,06 mm/0,005°
Max. tube length²	6000 mm (optional 9500 mm)
Min. tube length (automatic loading)	3000 mm (optional 4500 mm)
Max. tube diameter	Ø 150 mm
Min. tube diameter (with catcher)	Ø 40 mm
Max. wall thickness	4 mm
Length of finished part (with catcher)	20 - 1500 mm
Min. length of remainder piece	70 mm
Max. bundle weight	3000 kg

1	In accordance with VDI/DGQ 3441 – measuring length 1m. The quality of results that can be achieved depends very much on the accuracy of the tubes. The effects of heat, internal tensions and the rigidity of the tube can also affect the result.
2	Acceptable tolerance according to DIN: ± 500 mm.