TruTool S 450, dimensional drawing
For heavy-duty tasks
The TruTool S 450 is equipped with a robust cutting table specifically designed for thick sheet. This enables you to produce high-quality cuts in sheet thicknesses of up to 0.177 in. Above all, the machine is particularly well-suited for processing stainless steel up to 0.1 in. You can cut radii starting from 1.37 in without force. With a working speed of 19.5 feet per minute, you can progress quickly with your work. This is particularly advantageous when processing large sheets. The cutters can be adjusted quickly and easily to the sheet thickness using a rotary knob.
Particularly powerful in thick sheets
Powerful 1400 W motor with a cutting table specifically designed for thick sheet.
Adjustment without the need for tools
Cutter height adjustment enables individual adaptation to the sheet thickness.
Extremely user-friendly
The bow-handle, for one-hand and two-hand operation, ensures reliable machine control.
Long service life
The cutters each have two cutting edges and can be used either at the top or bottom.
Flat sheet
Cutting and trimming of flat sheets. For radial and interior cutouts as well as notching.
Coil processing
For cutting coils. For relief cuts and sampling.
Grids
For cutting the most diverse wire grids.
The following consumables and the corresponding accessories are included in the scope of delivery.
Cutter
Integrated
Allen key DIN 911-2
1 unit 0002946
Allen key DIN 911-5
1 unit 0067857
Grease gun (filled with "G1")
1 unit 1369906
Tube of grease "G1", 0.88 oz
1 unit 0344969
TRUMPF Box M2
1 unit 1770890
Find the right consumables and accessories for your machine here.
Cutter
For steel up to 57,000
Set of 2
140451
Cutter CR
For high-tensile sheets up to 114,000
Set of 2
140452
Work station with pedestal
For the stationary processing of small workpieces and wire grids
1 unit
918382
Workstation without pedestal
For the stationary processing of small workpieces and wire grids.
1 unit
979371
Pedestal
Pedestal for work station
1 unit
3677
TRUMPF Box M2
1 unit
1770890
Height adjustment without tools
The handy marking points on the rotary knob make it easy to adjust the cutters, for curves or straight cuts. The perfect setting is available for every application and sheet thickness. This facilitates sheet metal processing, enabling you to carry out work effortlessly.
Two-way blade rotation
You can achieve high-quality cutting results due to the secure cutter attachment. If the cutting performance decreases, you can rotate the cutter by 180° and continue working with a new cutting edge. The result is optimum cut quality, combined with a long tool life.
Optimal working speed
An easy-to-use speed controller on the motor regulates the stroke rate and adapts to the respective application. This is particularly well-suited for working with scribed lines, where radii and stainless steel are frequently processed. Reducing the stroke rate achieves the optimal torque, especially for processing sheet thicknesses from 0.16 inches. Lower speeds are recommended for cutting stainless steel. The speed controller can be used to adjust the working speed in line with the respective working situation.
TruTool S 450
| |
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 4.5 mm |
| Maximum sheet thickness, steel 600 N/mm² | 3.5 mm |
| Maximum sheet thickness, steel 800 N/mm² | 2.5 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 5 mm |
| Radii | |
| Smallest radius | R 35 / L 25 mm |
| General | |
| Working speed | 4 m/min - 6 m/min |
| Stroke rate at nominal load | 1600 1/min |
| Starting hole diameter | 75 mm |
| Nominal input power | 1400 W |
| Weight | |
| Weight without cable | 6.2 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
