Handy battery-powered machine with chip clipper
The TruTool C 160 12V LiHD rechargeable battery with integrated chip clipper for two-handed operation is ideal for notching work and interior cutouts of up to 1.6 mm in mild steel and 1.2 mm in stainless steel. It enables you to clip chips at any point. The cuts are free of deformation and of high quality, and the 4.0 Ah / 12V LiHD rechargeable battery guarantees long runtimes.
Compact and practical 12V rechargeable battery. Compatible in its voltage class and with the 12V-36V recharger.
Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.
The chips are clipped with a three-quarter clockwise turn by means of a lever
You can cut chips at any time and pull the machine out of the workpiece.
For cutting and trimming flat sheets. For radial and interior cutouts as well as notching.
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
For cutting tubes.
For cutting checker plates. For radial and interior cutouts.
Corrugated sheet metal
For cutting corrugated sheet metal. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 - 1.6 mm
Set of 2 0927708
1 unti 1884910
1 unti 0067822
1 unti 2598770
1 unit, DE/CH version: 2569784
1 unit, GB version: 2569786
1 unit, USA version: 2569785
1 unti 2579850
1 unti 1763682
Find the right consumables and accessories for your machine here.
Ideal for sheet thicknesses of 0.39 - 0.63 in.
Ideal for sheet thicknesses up to 0.4 in.
Ideal for stainless steel and spiral ducts
1 x straight cutter 0.039 in., 1 x curve cutter
2 units with screws
For interior cutouts and notches
1x cutting strip set, 1x chip clipper
For 12V and 18V LiHD rechargeable battery
1x LG 12V-36V recharger / 2x 12V LiHD 4.0 Ah rechargeable battery
Suitable for the 12V LiHD battery machines
The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.
The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.
Small and handy
The 12V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 29.5 feet per minute. The speed controller is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
TruTool C 160 with chip clipper Li-ion 10.8 V
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||1.6 mm|
|Maximum sheet thickness, steel 600 N/mm²||1.2 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||2 mm|
|Spiral duct, steel 400 N/mm²||4 x 0,63 mm|
|Smallest radius||40 mm|
|Working speed||5 m/min - 9 m/min|
|Stroke rate at nominal load||3520 1/min|
|Stroke rate during idle run||5500 1/min|
|Starting hole diameter||15 mm|
|Weight (with 4 Ah rechargeable battery)||1.5 kg|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.