Unbeatable and powerful
The TruTool C 250 provides unmatchable performance. It cuts sheet thicknesses of 0.1 in. in mild steel and 0.06 in. in stainless steel. It offers a unique added benefit in the form of the integrated chip clipper, which can be operated with one hand. This enables you to cut chips with one hand at any time and pull the machine out of the workpiece. The easily visible marks on the cutting head mean that you can re-position the machine accurately at any time. The TruTool C 250 offers an impressive top cutting speed of up to 10 feet per minute.
Chips can be easily cut with one hand at the touch of a button without difficulty.
The most powerful model of its class. For mild steel of up to 0.1 in. and stainless steel of up to 0.06 in.
You can cut chips at any time and pull the machine out of the workpiece.
For perfect results, you can choose between 5 different cutters.
For cutting and trimming flat sheets. For radial and interior cutouts as well as notches.
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
For cutting spiral ducts. For sheet thicknesses in mild steel of 4 x 0.035 in. or 6 x 0.024 in. and 4 x 0.024 in. in stainless steel.
For cutting tubes.
For cutting coils. For relief cuts and sampling.
For cutting diamond plate. For radial and interior cutouts.
Corrugated sheet metal
For cutting corrugated sheet metal. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
0.06 - 0.1 in
Set of 2 1275275
1 unit 1763681
Find the right consumables and accessories for your machine here.
Ideal for sheet thicknesses 0.06 - 0.1 in.
Ideal for sheet thicknesses 0.02 - 0.06 in.
Ideal for spiral ducts up to 4 x 0.035 in.
2 units with screws
With T-handle TX20
TruTool C 250 with chip clipper
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||2.5 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||3 mm|
|Spiral duct, steel 400 N/mm²||4x 0,9 / 6 x 0,6 mm|
|Spiral duct, steel 600 N/mm²||4x 0,6 mm|
|Smallest radius||150 mm|
|Working speed||3 m/min - 10 m/min|
|Stroke rate at nominal load||2400 1/min|
|Starting hole diameter||22 mm|
|Nominal input power||550 W|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.