Your processing times are noticeably reduced through top machine dynamics, piercing on-the-fly with FastLine Cell, and dynamic cutting optics. For larger quantities you can load and unload parallel to production using two-station operation or the rotary table. The lightning-fast front door made from glass fibre composites also significantly reduces non-productive times and ensures fast access to the work area.
Modular and highly flexible design
With the TruLaser Cell Series 7040 laser system you have everything you need – regardless of whether you want to process two or three-dimensional components or tubes. You can change between cutting and welding with flexibility. The modular setup of the machine, as well as the option of individual adjustment and retrofitting, enable you to optimally customize the TruLaser Cell Series 7040 to a modified production environment and to react to changing customer requirements with flexibility.
Due to top machine dynamics and numerous clever functions for optimizing the cycle time, you can process faster than ever.
The control panel (which can be moved over the machine's entire length) and the MobileControl app offer the greatest possible ergonomic comfort when operating the machine – from any position.
The X-Blast technology provides more robust processes during cutting, especially for complex geometries, and ensures a significantly higher nozzle service life.
Technology tables, guaranteed raw beam adjustment, as well as the patented BrightLine Weld guarantee perfect results when cutting and welding.
With a modern control concept and the OPC/UA communication interface, you are always ready to face the challenges of Industry 4.0.
The modular principle and the fact that the machine can be retrofitted enable you to individually configure the machine.
Processing of galvanized steel
In the automotive industry in particular, components are frequently produced from galvanized steel to protect the components against corrosion. Using the TruLaser Cell Series 7040, you can cut galvanized steel sheets quickly and to an extremely high quality level. The machine also enables you to react optimally to changes and to adapt the component accordingly. This increases flexibility, which is above all important in the field of prototype construction and pre-series production.
Laser-cut vehicle rear seat
The openings and trimming of the deep-drawn component are carried out using the TruLaser Cell Series 7040. Especially for small quantities, processing with conventional punching tools is often too expensive. With the TruLaser Cell Series 7040, you can cut all of the required contours extremely quickly, reducing production costs.
Precise and fast laser cutting
Compared to alternative processes, such as milling, the TruLaser Cell Series 7040 offers a cost-effective alternative for complex components. The machine laser cuts all the outer contours and creates the through holes.
Laser-welded fan wheel
The laser processing of three-dimensional components such as the fan wheel make new geometrical design options possible. Your designs will save material, and you can achieve a weight reduction. Laser welding also considerably reduces rework in comparison to standard procedures. You save time and prevent the component from becoming distorted.
Laser-welded water pump coupling
The BrightLine Weld technology allows you to weld products such as water pump couplings with virtually no spatters and with up to 300% greater productivity.
Repair welding and coating of components*
High-quality components can be repaired and coated using laser metal deposition. The coating process with special alloys can achieve a noticeably longer component service life.
*available upon request
TruLaser Cell 7040 CO2
TruLaser Cell 7040 fiber
|Axis travel range|
|X axis travel range||4000 mm||4000 mm|
|Y axis travel range||1500 / 2000 mm||1500 / 2000 mm|
|Z axis travel range||750 mm||750 mm|
|B axis travel range||± 135 °||± 135 °|
|C axis travel range||n x 360 °||n x 360 °|
|Axis travel range of dynamic cutting optics||± 9 mm||± 9 mm|
|Maximum axis speeds|
|Maximum axis speed, axially parallel in X||100 m/min||100 m/min|
|Maximum axis speed, axially parallel in Y||100 m/min||100 m/min|
|Maximum axis speed, axially parallel in Z||100 m/min||100 m/min|
|Maximum axis speed, simultaneous||173 m/min||173 m/min|
|Maximum axis speed of B axis||90 1/min||90 1/min|
|Maximum axis speed of C axis||90 1/min||90 1/min|
|Maximum axis accelerations|
|Maximum axis acceleration, axially parallel in X||9 m/s²||9 m/s²|
|Maximum axis acceleration, axially parallel in Y||10 m/s²||10 m/s²|
|Maximum axis acceleration, axially parallel in Z||10 m/s²||10 m/s²|
|Maximum axis acceleration of B axis||200 rad/s²||200 rad/s²|
|Maximum axis acceleration of C axis||100 rad/s²||100 rad/s²|
|Maximum axis acceleration of dynamic cutting optics||40 m/s²||40 m/s²|
|Positioning accuracy of linear axes (X, Y, Z)||0.08 mm||0.08 mm|
|Positioning accuracy of rotary axes (B)||0.015 °||0.015 °|
|Maximum laser power||3000 W - 6000 W||2000 W - 5000 W|
Numerous options make working with the TruLaser Cell 7040 not only easier, but, due to reduced non-productive times, also noticeably quicker and therefore more productive.
A partition wall separates the work area into two spaces. This means that set-up, loading, unloading, and laser processing are possible at the same time in two-station operation, irrespective of the selected laser source (CO2 or solid-state laser).
You can optimize the TruLaser Cell Series 7040 specifically for highly productive series production using the rotary table. You can increase productivity and ergonomics with just one loading and unloading position.
For easy loading and unloading of large components outside of the work area, the tables can be moved manually or automatically as desired.
With the MobileControl app from TRUMPF you can operate and monitor your machines easily and with flexibility as the app transmits the interface of the standard control panel onto the touch screen of your tablet PC. In addition to the static control panel, you have another option for monitoring and controlling your machine.
Benefit from virtually spatter-free laser welding and top welding seam quality with the BrightLine Weld option. You have the choice – increase your productivity considerably due to significantly increased feed rates, or reduce your energy costs by up to 40%. In doing so, you can reduce your machine downtimes and operating costs, as post-processing is reduced.
The Smart Approach function optimizes and improves the approach behavior of the machine when the edge of the component is pierced. This patented process reduces cycle time by up to 9%, while ensuring maximum process reliability.
Smart Optics Setup is a fixture attached to the machine base unit which cuts test sheets and readjusts the machine. Implementation is even easier due to standardized macros, saving time and money.
Minor nozzle collisions can cause minimal incorrect positioning of the cutting optics, invisible to the operator. This results in increased rejects and the associated costs. The ObserveLine Professional optical measuring procedure checks the positioning accuracy of the machine at regular, freely definable intervals, without the need for refitting and with virtually no effects on the cycle time. Incorrect positioning is detected and the number of rejects is reduced.
There are various reasons why cutting slugs remain in the finished part. With the ObserveLine Comfort optical measuring process, you detect this error quickly since this option checks every contour for a complete cut. ObserveLine Comfort has several advantages compared to measurement using distance regulation. The process reduces the measuring time and you can even measure smaller hole diameters and angled punching slugs.
The Central Link is an interface package with which you can network your machinery and use Industry 4.0 applications. The OPC UA communication standard enables you to convey machine data, such as control variables, measured values, or parameters, and to describe them in machine-readable form.
TruTops Cell provides you with everything you need for the convenient programming of your 3D laser processing. Due to integrated standard optics, it covers laser cutting, laser welding, and laser metal deposition. It loads 3D CAD data via numerous interfaces, and corrects it if required. The system automatically creates cutting suggestions in all three dimensions. It also automatically suggests devices.
With TruTops Boost you can get the best out of your TruLaser Cell 7040. Automated processes and wizards make day-to-day working with TruTops simple and efficient. The system autonomously generates, for example, looping or roundings on corners, and generates piercing points and approach and return paths. The software positions the parts to be cut in the best possible way. In the process, TruTops Boost means that the laser machine automatically uses appropriate parameters. Interfaces to leading CAD systems allow parts drawings to be quickly imported. However, with an integrated design module you can also create drawings yourself in no time at all.
Visual Online Support (VOS)
Resolve even the most complex issues via the app – without the need for on-site deployment. Visual Online Support (VOS) enables you to exchange image, audio, and video files conveniently, quickly, and reliably, and thus avoid long machine downtimes.
The extensive range of TruTops software supports you throughout the entire production process. Control your operational workflow in a simple and targeted manner, from managing your customer orders and purchasing processes to delivery of the produced parts. Through the direct coupling with the machine control, you can keep a constant eye on the status of your orders.
Depending on the application, you can choose from a wide range of TRUMPF CO2 and solid-state lasers and select the perfect one for your application. You can then combine this with the TruLaser Cell 7040.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.