The lasers of the TruMicro Series 7000 UV are pre-destined to manufacture flexible OLED displays in high numbers. The "laser-lift-off" process plays an essential role here: The UV solid-state laser removes the polyimide film from the glass substrate without damaging the organic semiconductor layer on top. As a result, the UV solid-state lasers of the TruMicro Series 7000 UV are particularly robust, durable, and have low running costs.
Maximum productivity for large-scale applications
With the high-power TruMicro Series 7000 UV short-pulse lasers, your work will be highly productive and use an ultraviolet wavelength. The TruMicro 7370 UV is therefore the most powerful UV solid-state laser in the world and achieves significantly better absorption in certain materials due to the short wavelengths. The combination of a high average power and an ultraviolet wavelength provides the ideal conditions for manufacturing flexible OLED displays. Simultaneously benefit from the industrial quality and reliability of tried-and-tested TRUMPF disk laser technology. The high productivity can be increased even further by synchronizing several lasers.
The ideal combination for your micro-processing requirements.
The internal power regulation provides the full pulse energy for your process.
Manufacturing modern OLED displays
The high-power TruMicro Series 7000 UV short-pulse lasers make modern flexible displays a possibility. Due to the short pulse duration, the UV solid-state lasers reliably detach the sensitive display film from the carrier substrate. This procedure is known as laser lift-off.
|Average output power||180 W|
|Beam quality (M²)||22.5 ± 2.5|
|Pulse duration||15 ns ± 3 ns|
|Max. pulse energy||18 mJ|
|Min. repetition rate||10 kHz|
|Dimensions of laser head (W x H x D)||810 mm x 450 mm x 2131 mm|
|Dimensions of supply unit (W x H x D)||1798 mm x 1090 mm x 650 mm|
In the event of an error, TRUMPF service experts will remotely access your laser via a secure remote connection. In many cases the fault can be remedied directly in this way, or the configuration of the laser can be modified in a way that permits you to continue manufacturing until the spare part arrives.
You can synchronize up to four lasers for even higher productivity. Due to the combined laser power, you can, for example, achieve a higher productivity in line-generating optics applications.
TruControl is the quick and easy-to-use control for TRUMPF solid-state lasers. It regulates the laser power in real time in order to deliver reproducible results. TruControl manages, controls, and visualizes the interface configuration. You benefit from a uniform control architecture across all laser technologies. With TRUMPF Teleservice you will also receive remote support in seconds. This will allow you to avoid service calls or be as prepared as possible and increase the availability of the laser device.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.