You have selected China. Based on your configuration, United States might be more appropriate. Do you want to keep or change the selection?

TruLaser 5030 / 5040 / 5060 | TRUMPF
TruLaser 5030, productive machine
TruLaser 5030, productive machine
2D laser cutting machines

TruLaser 5030 / 5040 / 5060

The productive machine

The productive machine

The laser cutting machines TruLaser 5030 / 5040 / 5060 represent high productivity, efficiency, and high-quality results. They are characterized by speed and reliable processes. Diverse automation solutions and intelligent functions guarantee excellent results in continuous operation – the smooth edges produced by the CO2 laser also offer clear-cut benefits. The perfect machine for excellent laser cutting.

Perfect quality

With the TruFlow CO2 laser, you can achieve perfect, micro-burr-free cutting results.

Perfect edges

Achieve extremely smooth cutting edges in stainless steel with BrightLine.

Minimal part costs

High machine dynamics, even for complex contours

Intricate cutting even in thick mild steel

With the CoolLine function, you can even create small contours in thick mild steel to an outstanding quality.

Increased machine availability

Condition Guide always monitors the condition of your machine.

Perfect nozzle quality

Smart nozzle automation ensures a high quality of nozzle – even in fully automatic operation

TruLaser 5030 product video
TruLaser 3050, extremely smooth edges

Extremely smooth cutting edges with BrightLine

The BrightLine cutting procedure, the interaction between innovative components and a flow-optimized nozzle, enables the highest quality cuts to be made in thick stainless steel and mild steel. Particularly in stainless steel, the BrightLine fusion cutting produces an especially high-quality cutting edge – a clear-cut mark of quality. This results in considerably less reworking, or often even no reworking at all.

TruLaser 3050, thick mild steel cut with CoolLine

Thick mild steel cut with CoolLine

The CoolLine process specifically cools the workpiece during laser cutting. This enables new geometries and considerably increases process reliability in thick mild steel.

TruLaser 5030, thin stainless steel

Thin stainless steel

You can achieve perfect quality in thin stainless steel – even in intricate contours: The edges are burr-free and rework is no longer required.

TruLaser 5030
TruLaser 5040
TruLaser 5060
Length 9950 mm 12510 mm 16930 mm
Width 4600 mm 5400 mm 5420 mm
Height 2400 mm 2400 mm 2500 mm
Maximum speed    
Simultaneous 300 m/min 300 m/min 300 m/min
Working range    
X axis 3000 mm 4000 mm 6000 mm
Y axis 1500 mm 2000 mm 2000 mm
Maximum workpiece weight - - -
Laser-specific data - TruFlow 6000    
Maximum laser power 6000 W 6000 W 6000 W
Maximum sheet thickness, mild steel 25 mm 25 mm 25 mm
Maximum sheet thickness, stainless steel 25 mm 25 mm 25 mm
Maximum sheet thickness, aluminum 16 mm 16 mm 16 mm
Consumption values    
Average power input in production - TruFlow 6000 32 kW 32 kW 32 kW

High productivity and the best quality: Powerful functions guarantee the best processing results.

Process reliability


AdjustLine enables the easy adjustment of the cutting process to materials of different quality. The function increases process reliability, above all when cutting material of a poor quality. For you this means less scrap and lower material costs. The operator can switch AdjustLine on or off at any time – programming is not required.

Collision protection

Collision protection for your cutting head guarantees the highest process reliability. You benefit from shorter non-productive times due to increased machine availability. In the event of collisions, damage to the cutting head is avoided.


Mild steel becomes extremely hot during laser cutting and may melt uncontrollably. With CoolLine, this does not happen. During processing, the cutting head sprays water mist in a circle around the laser beam onto the workpiece. This is possible due to nozzles with precise bore holes. The vaporization energy of the water means that the material around the laser beam is cooled. CoolLine therefore enables new geometries and considerably increases process reliability in thick mild steel.


Smart nozzle automation

The optimal condition of the nozzle and lens is an important requirement in order to ensure a seamless production process and a high level of part quality. The smart nozzle automation package combines intelligent functions, including LensLine to increase the service life of your lenses, in order to ensure high nozzle and lens quality – even in fully automatic operation.

Smart collision prevention

You can largely avoid the need for microjoints, saving costly rework. The parts can also be unloaded using an automated mechanism as they do not tip over.


A camera system precisely determines the position of inserted sheets and enables the rework of parts which have already been cut with absolute precision. DetectLine also automatically measures a cut focusing comb and sets the focal position.



With BrightLine you can achieve the perfect sectional view. Special cutting data and the BrightLine nozzle with adapted cutting gas jet considerably improve the quality of the cutting edges. The process demonstrates its advantages in thick stainless steel in particular. The BrightLine fusion cutting creates smooth edges which are a clear-cut benefit for you. Reworking is no longer required.


PierceLine monitors and controls the piercing process. This saves material and preserves the machine, increasing part quality and shortening the piercing time by up to 80%.

Operator support

TruLaser 5030, Condition Guide
Condition Guide

One glance is enough: Due to the new Condition Guide function, you are always informed about the condition of your machine. A traffic light system shows the status of important elements which influence the cutting capability of the machine. Condition Guide will give you recommendations for action as required. Process diagrams facilitate forecasting as to when action may need to be taken. Maintenance work can therefore be planned efficiently.

Dot Matrix Code 1

The Dot Matrix Code function facilitates fast, process reliable part identification with a standardized industrial code. Within seconds, the laser in your flatbed laser machine applies a 2D code (data matrix) made out of dots onto a part. It contains information for the process chain. The code calls up the corresponding program at the next machine, for example.

MobileControl app

With the MobileControl app, you can operate and monitor your machines easily and with flexibility as the app transmits the interface of the standard control panel onto the touch screen of your tablet PC. The app enables you to call up different machine information at various places in the machine work environment – such as the clearing area – or to change the program.


With Drop&Cut, remainder sheet is utilized more easily, intuitively, and efficiently than ever before. A camera ensures the live image of the machine interior appears directly on your user interface. You can position any number of part geometries on the remainder sheet. This saves time during the post-production of individual parts. Time-consuming process steps such as aligning the sheet, sheet position measurement or zero point displacement are not needed.

TruTops Boost Key Visual

TruTops Boost

Konstruieren und programmieren Sie Ihre Laser-, Stanz- und kombinierten Stanz-Laser-Maschinen intelligent mit TruTops Boost, Ihre All-in-One-3D-Lösung. Viele Automatismen ersparen Ihnen zeitaufwendige Routinevorgänge und der gemeinsame Schachtelpool spart Zeit und Material. Außerdem behalten Sie stets den Überblick über alle Fertigungsaufträge und auftragsorientiertes Arbeiten.

TruTops Monitor

Reduzieren Sie Ihre Stillstandzeiten. Erfassen und analysieren Sie Maschinendaten, wie Stillstände, Fehlermeldungen, Störursachen und Wartungszeiten von sämtlichen Arbeitsplätzen in Ihrer Fertigung. Sollte ein Stillstand oder eine Störung auftreten, informiert Sie TruTops Monitor sofort über die Ursache und Sie können schnell darauf reagieren.


Das umfangreiche TruTops Software-Portfolio unterstützt Sie über den gesamten Fertigungsprozess hinweg. Steuern Sie einfach und gezielt Ihren betrieblichen Ablauf von der Verwaltung Ihrer Kundenaufträge und Einkaufsprozesse bis zur Auslieferung des gefertigten Teils. Dank direkter Kopplung mit der Maschinensteuerung haben Sie den Status Ihrer Aufträge dabei jederzeit im Blick.

Choose the right automation components for your laser cutting machine from a large modular system. From semi-automatic loading to a fully automatic processing cell with storage connection, TRUMPF provides solutions which optimize your process chain.



Your entry into automation: The LoadMaster enables the automatic loading of your machine with raw sheets.

LiftMaster Compact

Loading and unloading

The compact LiftMaster Compact loads and unloads your machine completely automatically and extremely fast. With the LiftMaster Linear Basic you have the option of multiple-machine connection.


Loading and unloading / Part sorting

The automation solution, LiftMaster, covers a broad range of automation functions. It loads and unloads, but is also suitable for pallet handling or part removal. The LiftMaster Sort also separates finished parts from the scrap skeleton. LiftMaster Store and LiftMaster Store Linear connect your system directly to the store. The SortMaster automatically sorts finished parts.

PalletMaster Tower

Auxiliary pallet operation

The PalletMaster Tower enables flexible material handling around the clock. It combines the automatic changing of pallets with compact storage technology.

TruStore Series 1000

Storage system

With the storage systems of the TruStore Series 1000 and TruStore Series 3000 you can organize your material handling according to your requirements.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

  • * This function is available as a test or rental version.

You may also find these topics interesting

TRUMPF Werkzeugmaschinen GmbH + Co. KG
Fax +49 7156 303933066
Service & contact