TruLaser Cell 8030, tried, tested and now improved even further
TruLaser Cell 8030, tried, tested and now improved even further
3D laser cutting machines

TruLaser Cell 8030

Tried, tested and now improved even further

TruLaser Cell 8030 3D laser cutting machine as an installation version
TruLaser Cell 8030 3D laser cutting machine as an installation version
3D laser cutting machines

TruLaser Cell 8030

Tried, tested, and now improved even further.

TRUMPF 3D laser welding TruLaser cell 8030
TRUMPF 3D laser welding TruLaser cell 8030
3D laser cutting machines

TruLaser Cell 8030

Tried, tested, and now improved even further.

-/-

Productive high-end 3D laser cutting machine

The TruLaser Cell 8030 sets the standard for 3D cutting of hot-formed components and can be configured to your needs with flexibility. This allows you to choose between the large version for cutting door frames and complete side sections or the smaller version for producing single parts and segments of the body in white. As a result of new developments and optimized details, it offers even greater production reliability, combined with arguably the highest productivity on the market. You can increase your profitability due to options such as the Smart Approach, Dynamic Level 3, or the rotary indexing table.

Maximum productivity

Compared to the previous model, you now benefit from even higher acceleration and Dynamic Level 3.

Minimal non-productive time

The optimized rotary table is the fastest on the market. With the rotation time of 1.8 seconds (which is 20% shorter), the overall performance is increased with each component.

High level of robustness

Experience gained from the largest installed base design of 3D hot-forming machines has been applied to the new machine.

Diverse functions

Optimized production processes due to functions such as X-Blast technology or ObserveLine Comfort & Professional

Highest energy efficiency

Combined with the TruDisk 2000, your power consumption and part costs will fall.

TruLaser Cell 8030 – tried, tested and now improved even further
TruLaser Cell 8030 ObserveLine Professional
ObserveLine for cutting-slug control
TruLaser Cell 8030 performance comparison
Time comparison of rotating and cutting speed in TruLaser Cell 8030
-/-
Compact footprint of the TruLaserCell 8030
Compact footprint

The setup of the TruLaser Cell 8030 is not only compact, but also extremely user-friendly and ergonomic. The rotary table can be easily accessed from both the front and the sides. Based on your wishes and requirements, several machines can be flexibly planned in your plant layout. In doing so, you can optimize either the footprints or the preferred material flow.

X-Blast Nozzle Technology

In comparison with standard nozzles, the X-Blast Nozzle has twice the bandwidth. This means the working distance of the nozzle can be increased, resulting in considerably fewer nozzle collisions. The process stability is also improved, which increases the quality of your components.

Dynamic Level 3

The Dynamic Level 3 option ensures your TruLaser Cell 8030 accelerates even faster. This means that, for complex components, you can reduce your cycle times by up to 7%.

Laser-cut B-column with TruLaser Cell 8030

Laser cutting a door frame

With the TruLaser Cell 8030, you can cut the large dimensions of a hot-formed vehicle side section very quickly and with reliably high quality with the TruDisk laser and X-Blast technology.

TRUMPF laser cutting cross beam

Laser cutting of a cross beam

Compared to the previous model, the TruLaser Cell 8030 cuts the hot-formed vehicle cross beams with around 10% higher machine dynamics, 10% lower non-productive times, and a 30% quicker punching slug check. The TruDisk laser and the X-Blast technology ensure consistently high cutting quality here.

Crossmember laser cut using the TruLaser Cell 8030

Hot-formed and laser-cut crossmember

Mass series parts can be processed particularly cost-effectively on the TruLaser Cell 8030. The NC programming also provides you with maximum flexibility for component geometry.

Laser-cut B-pillar

The TruLaser Cell 8030 reliably cuts 3D components such as B-pillars for cars. The processing of hot-formed components with the laser is more cost-effective than using standard processes. With the flexible laser tool, components can also be easily adapted to new requirements – even at a later time.

-/-
TruLaser Cell 8030 (standard version)
TruLaser Cell 8030 (large version)
Axis travel range   
Maximum number of axes 5 5
X axis travel range 3000 mm 3000 mm
Y axis travel range 1300 mm 2100 mm
Z axis travel range 600 mm 650 mm
B axis travel range ± 135 ° ± 135 °
C axis travel range n x 360 ° n x 360 °
Axis travel range of dynamic cutting optics ± 10 mm ± 10 mm
Maximum workpiece size   
Maximum workpiece size in X 2540 mm 2540 mm
Maximum workpiece size in Y 840 mm 1640 mm
Maximum workpiece size in Z 370 mm 420 mm
Maximum axis speeds   
Maximum axis speed, axially parallel in X 100 m/min 100 m/min
Maximum axis speed, axially parallel in Y 100 m/min 100 m/min
Maximum axis speed, axially parallel in Z 100 m/min 100 m/min
Maximum axis speed, simultaneous 173 m/min 173 m/min
Maximum axis speed of B axis 90 1/min 90 1/min
Maximum axis speed of C axis 90 1/min 90 1/min
Maximum axis accelerations   
Maximum axis acceleration, axially parallel in X 11 m/s2 10 m/s2
Maximum axis acceleration, axially parallel in Y 11 m/s2 10 m/s2
Maximum axis acceleration, axially parallel in Z 11 m/s2 10 m/s2
Maximum axis acceleration, simultaneous 19.1 m/s2 17.3 m/s2
Maximum axis acceleration of B axis 200 rad/s2 200 rad/s2
Maximum axis acceleration of C axis 100 rad/s2 100 rad/s2
Maximum axis acceleration of dynamic cutting optics 40 m/s2 40 m/s2
Positioning accuracy   
Positioning accuracy of linear axes (X, Y, Z) 0.08 mm 0.08 mm
Positioning accuracy of rotary axes (B) 0.015 ° 0.015 °
Laser   
Maximum laser power 2000 W - 4000 W 2000 W - 4000 W
Rotational changer automation   
Maximum loading per side 300 kg 700 kg
Work stations 2 2
Typical total non-productive time 4.2 s 5.5 s
Typical rotation time 1.8 s 3 s
Diameter of rotary plate 4000 mm 5000 mm
Working height 700 mm 700 mm
TruTops Cell

TruTops Cell

TruTops Cell provides you with everything you need for the convenient programming of your 3D laser processing – no matter whether this is the programming of laser cutting, laser welding, or laser metal deposition programs. It loads 3D CAD data via numerous interfaces, and corrects it if required. The system automatically creates cutting suggestions in all three dimensions. It also automatically suggests devices.

Software

The extensive range of TruTops software supports you throughout the entire production process. Control your operational workflow in a simple and targeted manner, from managing your customer orders and purchasing processes to delivery of the produced parts. Through the direct coupling with the machine control, you can keep a constant eye on the status of your orders.

Depending on the application, you can choose from a wide range of TRUMPF CO2 and solid-state lasers and select the perfect one for your application. You then have the option of combining this with the TruLaser Cell 8030.

Improve the dynamics, cost-effectiveness, and productivity of your TruLaser Cell 8030 with numerous innovative options.

Rotary indexing table

Is the process step of manual loading and unloading creating a bottleneck in your production? The rotary indexing table helps by completely separating the loading and unloading areas. Alternatively, you can place a robot on the unloading side as a cost-effective partial automation option. This results in the shortest cycle times with only one employee, and you can produce parts much more productively. If your requirements change over time, you can change this option to a fully automated solution at any time.

ObserveLine Comfort

There are various reasons why cutting slugs remain in the finished part. With the ObserveLine Comfort optical measuring procedure, you can detect this error quickly since this option checks every contour for a complete cut – all this is carried out four times faster than with comparable systems on the market. ObserveLine Comfort has several advantages compared to measurement using distance regulation. The process reduces the measuring time and you can even measure smaller hole diameters and angled punching slugs.

ObserveLine Professional

Minor nozzle collisions can cause minimal incorrect positioning of the cutting optics, invisible to the operator. This results in increased scrap and associated costs. The ObserveLine Professional optical measuring procedure checks the positioning accuracy of the machine at regular, freely definable intervals, without the need for refitting and with virtually no effects on the cycle time. Incorrect positioning is detected and the number of rejects is reduced.

Smart Optics Setup

Smart Optics Setup is a fixture attached to the machine base unit which cuts test sheets and readjusts the machine. Implementation is even easier due to standardized macros, saving time and money.

Smart Approach

The Smart Approach function optimizes and improves the approach behavior of the machine when the edge of the component is pierced. This patented process reduces cycle time by up to 9%, while ensuring maximum process reliability.

FocusLine

FocusLine enables the program-controlled setting of the focal position depending on the type of material and the material thickness. The position is adjusted using a mirror subject to water pressure, influencing the curvature of its surface.

FastLine

FastLine improves and optimizes the approach behavior of the machine during piercing for contour cutting. Depending on the type of material and the material thickness, as well as the number of contours to be processed, you can increase the productivity of your system by up to 60%.

TruLaser Cell 8030 control interface
Control interface

You can integrate new devices easily and cost effectively into the machine control via the pneumatic and electrical interface.

TruTops Cell Basic
TruTops Cell Basic

TruTops Cell Basic enables you to adjust programs more easily, more quickly, and more reliably directly at the machine. Navigating within the NC program is incredibly simple, as the contour to be changed with the corresponding NC text can be selected by a simple click of the mouse. All changes made are visualized immediately and ensure unprecedented reliability when working in the program.

TruLaser Cell 8030 remaining time display
Comfort processing time display

The Comfort processing time display ensures that you are perfectly informed at all times. It displays the remaining processing time of the component currently being processed, and provides additional information on the current status of the manufacturing job.

TruLaser Cell 8030 automation interface
Automation interface

Depending on the degree of automation of your production system, you can choose between different interface options. The Basic option reliably provides signals for production planning systems. With the Comfort option, you can implement more simple automation options independently. The Professional option is well-suited for highly automated production.

For all three solutions, you can profit from complete documentation and future upgrades, ensuring your standard software is always kept up to date.

TRUMPF MobileControl app
MobileControl app

With the MobileControl app from TRUMPF you can operate and monitor your machines easily and with flexibility as the app transmits the interface of the standard control panel onto the touch screen of your tablet PC. In addition to the static control panel, you have another option for monitoring and controlling your machine.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Contact
Downloads
Service & contact

Close

Country/region and language selection
Please take note of

You have selected China. Based on your configuration, United States might be more suitable. Would you like to keep or change the selection?

China
United States

Or, select a country or a region.