You have selected China. Based on your configuration, United States might be more appropriate. Do you want to keep or change the selection?

TruArc Weld 1000 | TRUMPF
TruArc Weld 1000
TruArc Weld 1000
Welding machines

TruArc Weld 1000

Easy to get into - automated welding

Quick programming, safe welding

The welding cell is a fully equipped machine tool, tested by the Technical Supervisory Association (TÜV) and certified with CE. This includes an exhaust system, housing with anti-glare protection and safety equipment in line with TRUMPF standards. You can launch, program and operate the welding cell with very little training - video tutorials will do the job. You can utilize the welding cell in one- or two-station operation, depending on the component and lot size. This means, for example, that you can either process a larger component or smaller components in larger batches parallel to production.

Easy to operate and program

Using the operating unit on the welding torch and simple programming directly at robot control

Safe in line with TRUMPF standards

Safety cabin with anti-glare protection, self-cleaning exhaust system, LED lighting and collaborative robot

Quick set-up and start-up

Set the machine up at the desired location and start operation within just a few hours

Weld productively

Thanks to high-performance equipment from Fronius and set-up parallel to production using two-station operation

TruArc Weld 1000 – simple starting point for automated welding

Console

Console made of mild steel, 25 mm plate on 8 mm curved sheet metal with five weld seams. Even for just one piece, automated welding of this component is 21% faster (including programming) than manual welding.

TruArc Weld 1000, application of the transport securing device

Transport securing device

Transport securing device made of 6 mm mild steel. Thanks to this component, you can save 63% with automated welding compared to manual welding, starting from a lot size of 8.

-/-
TruArc Weld 1000
Axis data  
Type Collaborating industrial robot arm
Number of axes 6
Range 1300 mm
Repeatability +/- 0.05 mm
Welding source  
Type FRONIUS TPS 320i C PULSE
Welding current range MIG/MAG 3 A - 320 A
Dimensions and weights  
Cabin dimensions 3605 mm x 2454 mm x 2818 mm
Weight 2940 kg
Work area  
Typical maximum part size (with closed telescopic center separation) 600 mm x 600 mm x 600 mm
Typical maximum part size (with open telescopic center separation) 2000 mm x 600 mm x 600 mm
TruArc Weld 1000, programming
Programming

Combination of intuitive operating unit on the welding torch and simple programming directly at robot control for minimum programming times. The design of the machine's central operating unit is simple and clear.

TruArc Weld 1000, robot
Robot

Collaborative robot UR10e with six axes and force moment sensor. The linear axis positions the robot on the left or right.

TruArc Weld 1000, housing
Safety cabin

Safety cabin with integrated exhaust system, automatically opening anti-glare protection and lighting. The extendible partition wall divides the work area for two-station operation if required.

TruArc Weld 1000, Fronius equipment
Fronius equipment

High-performance welding equipment from Fronius: TPS 320i C PULSE welding source including welding package PMC, ultra-slim 350 ampere torch and external wire feed system.

TruArc Weld 1000, Demmeler table
Demmeler table

3D welding table by Demmeler with hole pattern D16 in a 50 x 50 mm grid and hardened surface. The table's dimensions are 2000 x 1000 x 100 mm.

Loading by crane

User-friendly loading of heavy and large components and devices is possible with this option. To do so, the cab cover is opened individually over the two stations and the component is loaded into the machine interior by crane.

Technology package - CMT welding

The optional technology package CMT welding ensures higher process reliability and energy-reduced welding with fewer weld spatters and little distortion with the TruArc Weld 1000.

Pendulum welding

Pendulum welding is particularly beneficial for thick sheet processing. You can prevent a lack of fusion with wide weld seams.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Contact
Christoph Turner
Support Sales
E-mail
Downloads
Service & contact