We use cookies for the provision and functionality of this website. If you agree that we can use cookies for other purposes please click here. Information on deactivating cookies and data protection
TruTool TF 350 Li-ion power fastener
New
TruTool TF 350 Li-ion power fastener
Battery-powered machines

TruTool TF 350 Li-ion rechargeable battery 18 V

Power fastener joining duct edges
New
Power fastener joining duct edges
Battery-powered machines

TruTool TF 350 Li-ion rechargeable battery 18 V

Easy connecting of two or more metal parts

- / -
Cordless connecting – fast, economical, and independent

Joining of ventilation ducts is often performed on site at the construction site. With the battery machine, you are not reliant on the power supply and can work conveniently and cordlessly. This allows you to join coated or uncoated workpieces with material thicknesses of 0.8 mm to 4 mm with the TruTool TF 350 Li-ion rechargeable battery. The result is a long-lasting connection in one operation, without additional connecting elements. With the 4 Ah rechargeable battery, you can achieve up to 2100 joints in 400 N/mm2 mild steel at a sheet thickness of 2 mm.

Straight to the point

The connection point is secure and resilient and the joining points are resistant to corrosion.

No fasteners

No screws or rivets are used. This saves money and simplifies handling.

Perfect surface in one operation

The joining quality does not depend on whether surfaces are coated or uncoated.

The perfect combination

The rechargeable battery achieves a runtime that is up to 60% longer due to the Power Head Technology and brushless motor.

Dimensional drawing, TruTool TF 350 Li-ion
TruTool TF 350 Li-ion rechargeable battery 18 V, dimensional drawing

Battery and recharger
Battery technology

Individual electronic cell monitoring in the machine and in the charger protects the battery against overload, overheating, and deep discharge. The robust battery cells have a low energy drop and always remain cool. A microprocessor analyzes the battery data and controls an optimal charge and discharge process. The result is high power combined with a long service life for the battery. You can therefore work almost non-stop. The 2 Ah and 4 Ah rechargeable batteries only require 10 – 30 minutes to be charged to 80%.

Fügen von Kanälen

Joining ducts

Up to three parts can be connected together, even if the sheet thickness varies. For coated sheet metal, mild steel, stainless steel, aluminum, or with intermediate layers such as adhesive and plastic mats.

Fügen von Rahmenprofielen

Joining frame profiles

For joining connection flanges on ventilation and heating ducts.

- / -

The following consumables and the corresponding accessories are included in the scope of delivery.

TruTool TF 350, Stempel
Punch (integrated)

1 unti 1884902

TruTool TF 350, Kipparm zu Stempel
Tilting arm for punch

1 unti 0128748

TruTool TF 350, Matrize 3-
Die arm fixed No. 3 sheet thickness 3.1 - 3.5

1 unti 0118132

TruTool TF 350, Abstreifer für gerade Bleche
Stripper for straight sheets (integrated)

1 unti 0053649

TruTool TF 350, Abstreifer für Kanäle
Stripper for channels

1 unti 0112929

Allen key DIN 911-6

1 unti 0067865

Allen key DIN 911-5

1 unti 0067857

Allen key DIN 911-3

1 unti 0067830

Grease gun (filled with "G1")

1 unti 1398728

4 Ah rechargeable battery 18 V (2 units)

1 unti 2272665

Charger 18 V
Charger 100 - 240 V incl. cable

1 unti 2272666

Belt clip

1 unti 2272758

TF 350 Li-ion carrying case
Case

1 unit 2282148

Find the right consumables and accessories for your machine here.

TruTool TF 350, punch
Punch

1 unit 1884902
Set of 2 1264160
TruTool TF 350, die No. 1
Die No. 1

Well-suited for sheet thicknesses of 0.8 - 1.5 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

1 unit 111969
TruTool TF 350, die No. 2
Die No. 2

Well-suited for sheet thicknesses of 1.6 - 2 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

1 unit 111968
TruTool TF 350, die No. 2+
Die No. 2+

Well-suited for sheet thicknesses of 2.1 - 2.5 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

1 unit 122272
TruTool TF 350, die No. 3-
Die No. 3-

Well-suited for sheet thicknesses of 2.6 - 3 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

1 unit 1884875
TruTool TF 350, die No. 3
Die No. 3

Well-suited for sheet thicknesses of 3.1 - 3.5 mm. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

1 unit 111967
TruTool TF 350, stripper for straight sheets
Stripper for straight sheets

1 unit 1884874
TruTool TF 350, tilting arm for die
Tilting arm for die No. 1

Well-suited for sheet thicknesses of 0.8 - 1.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 128792
TruTool TF 350, tilting arm for die
Tilting arm for die No. 2

Well-suited for sheet thicknesses of 1.6 - 2 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 128793
TruTool TF 350, tilting arm for die
Tilting arm for die No. 3-

Well-suited for sheet thicknesses of 2.6 - 3 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 129724
TruTool TF 350, tilting arm for die
Tilting arm for die No. 2+

Well-suited for sheet thicknesses of 2.1 - 2.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 129723
TruTool TF 350, tilting arm for die
Tilting arm for die No. 3

Well-suited for sheet thicknesses of 3.1 - 3.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 128794
TruTool TF 350, die arm fixed No. 1
Die arm fixed No. 1

Well-suited for sheet thicknesses of 0.8 - 1.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 118130
TruTool TF 350, die arm fixed No. 2
Die arm fixed No. 2

Well-suited for sheet thicknesses of 1.6 - 2 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 118131
TruTool TF 350, die arm fixed No. 2+
Die arm fixed No. 2+

Well-suited for sheet thicknesses of 2.1 - 2.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 129763
TruTool TF 350, die arm fixed No. 3-
Die arm fixed No. 3-

Well-suited for sheet thicknesses of 2.6 - 3 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 129764
TruTool TF 350, die arm fixed No. 3
Die arm fixed No. 3

Well-suited for sheet thicknesses of 3.1 - 3.5 mm. Can be selected with die No. 1, 2, 2+, 3- or 3.

1 unit 118132
TruTool TF 350, tilting arm for punch
Tilting arm for punch

1 unit 128748
TruTool TF 350, disc spring
Disc spring

1 unit 30678
TruTool TF 350, slewing ring
Slewing ring

For hanging up the machine on a balancer. Enables fatigue-free work with maximum movement.

1 unit 976671
TruTool TF 350, spring element
Spring element

1 unit 249303
TruTool TF 350, plate
Plate

1 unit 1884876
TruTool TF 350, plate for channels
Plate for channels

1 unit 243189
Still image of accessories
Punching and nibbling oil for steel

500 ml bottle 103387
Still image of accessories
Punching and nibbling oil for aluminum

1,000 ml bottle 125874
TruTool TF 350, joining station
Joining station

For quick and easy joining together of smaller sheet parts. Well-suited for stationary use.

1 unit 1224803
Still image of accessories
Lubricating grease G1

250 g 1446686
900 g 139440
Charger 18 V
Charger 100 V - 240 V

For Li-ion rechargeable battery 18 V with 2 Ah or 4 Ah. Cable included.

1 Stück (DE / CH) 2272666
1 Stück (GB) 2275871
1 Stück (USA) 2275872
TruTool belt clip
Belt clip

1 unit 1886524
Carrying-case-TF
Case

Brushless motor

Up to 60% more rechargeable battery running performance

The Power Head Technology is specifically designed for low-voltage rechargeable battery technology and ensures up to 20% longer running performance per battery charge. With its high torques, low power consumption, and minimal heat generation, the brushless motor provides even greater battery performance. This means that you can work for up to 40% longer. With the 4 Ah rechargeable battery, you can achieve up to 2100 joints at a sheet thickness of 2 mm and up to 1200 joints at a sheet thickness of 3.5 mm in 400 N/mm2 mild steel.

Compact, lightweight, and compatible

The 18 V battery machine has a compact and light design and allows fatigue-free work. The soft grip ensures safe and low-vibration working. You can combine the 18 V Li-ion rechargeable batteries with all current TRUMPF battery machines and the recharger in their voltage class. The Li-ion battery machines are also available as solo machines.

Battery machine speed controller

Optimal working speed

You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.

Straight to the point

With the clinching process, the sheets of metal to be joined are placed on top of each other. Then the tool cuts a strip into the sheets in a combined punching and forming process. A form-fitting and corrosion-resistant connection joins the top and lower sheets as the materials flow into one another. The connection point solidifies resulting in a permanent connection without additional tools or heat.

No fasteners

The rectangular joining point appears as a shallow raised spot. This means that you have no interference contour, such as in the case of edges that you find with screws and rivets. The simple handling means no fasteners are required and the machine is quickly ready for use. The TruTool TF 350 can also be adapted to the desired application quickly and easily. Simply choose the relevant tool.

Power fastener joining duct edges

User-friendly

The TruTool TF 350 power fastener offers an impressively compact and slim design, which makes it particularly well-suited to uses where space is limited. The geometry of the tool also has a large throat depth with a minimal interference contour. This produces flawless connections when processing ventilation ducts. Application on tight corners and small flange widths is also no problem for the TruTool TF 350.

Perfect surface

The joining zone is not exposed to thermal load or tension. The protective layer flows with the material during forming. This means that the material properties are unchanged, remain free of oxidation, and the surface structure is not damaged. There is no need for preliminary work or rework. An additional benefit is that clinching avoids material surface contamination. This is perfect for coated and uncoated materials; even sheet metal with a layer of oil is ideally suited to this.

TruTool TF 350 Li-ion rechargeable battery 18 V
Maximum sheet thicknesses  
Maximum sheet thickness, steel up to 400 N/mm² 3.5 mm
Maximum sheet thickness, steel up to 600 N/mm² 2.5 mm
Maximum sheet thickness, aluminum up to 250 N/mm² 4 mm
General  
Minimum sheet thickness 0.8 mm
Maximum joining force 25 kN
Max. stroke rate 2 1/s
Min. edge spacing 8 mm
Max. edge spacing 58 mm
Maximum flange height (B) 36 mm
Voltage 18 V
Weight  
Weight (with 2 Ah rechargable battery) 7.8 kg
Weight (with 4 Ah rechargable battery) 8.1 kg
PDF <1MB
Technical data sheet

The technical data of all product versions as a download.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

Service & contact

Close

Country and language selection

Please note

You have selected China . Based on your configuration, United States might be more appropriate. Do you want to keep or change the selection?

China
United States

Or select a country or region.