TruTops Boost innovations

Through the use of design profiles, you can control the import and boosting of 2D geometries in a similar way to 3D models.

Import and dismantle assemblies much faster than before - without using TecZone Design.

The new time calculation for the TruMatic 1000 / 3000 (K07/K09) and the TruPunch 1000 / 3000 (S19/S20) provides more accurate processing times for these machines.

For TruMatic machines and the TruLaser Center 7030, approach dimples can be created on single or multiple contours with adjustable parameters.

If the subsequent workstation has been set in an order, TecZone Cut can display this in the palletizing and in the single sheet view.

Use the pivoting-jaw gripper to place small parts on a pallet.

Program the new TruBend Cell 5000 Lean Edition in TecZone Bend. 

Additional versions of the new TruBend 8000 (B36) series are supported. 

The information displayed in the result lists can be configured on a user-specific basis.

The subsequent workstation can be managed in HomeZone. Alternatively, a transfer from the Oseon work plan is possible.

Benefit from the standardized tool assignment in Design and Bend with fewer messages and thus less post-processing. 

Check the generated cut geometry for important properties such as stored tools or recognized formed sections in GEO Viewer.

The display of the results list can be set user-defined.

You can decide if the part is boosted when the geometry is imported. Adjust and customize the setting for your processes.

Double click in the single part overview bar focuses parts in single sheet view and part overview and marks sheets with the part in the sheet overview.

When positioning between cutting processes the gas pressure is switched off. This reduces energy costs and increases process reliability.

All processing on parts and sheets is taken into account when nesting. Activate the process rules NestGmtsForPunch to do this.

Utilize the flexibility of the M and S multigripper in order to execute a large variety of parts with one gripper on the TruBend Cell 5000.

You can now place small parts onto a pallet using a gripper or drop them into a box using a suction cup gripper. 

You can program the new TruBend 8400 (B36) in full in TecZone Bend.

Benefit from the support of the new bending aid of the TruBend 8000 Series. 

Benefit from the improvements to the preparation of 2D files, such as additional smoothing options and performance enhancements.

In addition to 3D form recognition, you can now also replace 2D forms in cut geometry using working strokes, processing samples or other 2D templates.

Advantages of rounding edges: Improved paint adhesion and reduction of cutting injuries.

The sorting of equal parts into equal containers is carried out across sheets using Boost and can be carried out in the sheet overview.

Flexible stacking of parts against a beveled wall is now possible.

The input for customer tools has been revised. The creation of new bend deductions is significantly quicker and more comfortable thanks to the copy function.

All installation versions of the small parts removal station are now supported.

The new novice bending machine TruBend 1225 4-Axis can now be programmed.

The cutting machine of the job can be changed in HomeZone.

Preview the number of parts in the order list when selecting a sheet template.

Benefit from our simplification in the nesting sector by focusing on Lean Nest and the new added values based on new behaviors concerning the TwinLine blocks, as well as nesting single part cutting solutions in the laser sector.

Benefit from a faster operating experience thanks to new performance enhancements - particularly for perforated sheets.

Minimize marking in tacked parts with the new nanojoint function.

Reduce your post-processing by creating a welding edge or counterbore on the laser processing machine.

Features and enhancements offer many new options for stacking parts on pallets.

Importing cell components as obstructions or deposit stations is supported.

Importing grippers using ARV files is supported.

Control the geometry import and generated cut geometry using profiles.

Process stacks and convert 2D and 3D geometries before import in TruTops Boost.

Add documents to your parts and orders.

The tabs which were last used, including filters and sorting, can be restored when starting HomeZone.

Benefit from an improved automatic palletization suggestion and a more precise check for interactions.

When updating a part within a sheet program, utilize the different selection options, from replacement to removal of a part.

Update the single part cutting program for geometry adjustments of the part, taking the existing processing into consideration.

Identify the differences in similar parts in the results list more easily thanks to enlarged preview graphics.

Use the main information bar for quick access to the most important data of single parts and components of one assembly

Analogous to 3D shape recognition, formed section contours can now also be replaced in 2D by assigned punching tools or processing samples

Reduce the adaptation requirements during nesting by following the single part cutting solution for TruLaser machines (excluding TruLaser Center 7030).

Compile frequently used functions in individually configurable toolbars to program sheet programs more quickly.

Program the new TruMatic/TruPunch 3000 with Sort Master Compact.

Compare 2D geometries and apply targeted changes from one part to another.

Generate removal for the SortMaster with automatic use of the continuously extendible suction cup slats.

Use the new nesting algorithm without a time limit to achieve even better scrap-optimized sheet utilization.