Edge preparation in one operation
With the TruTool TKA 500, you can give components clean visible edges, break sharp edges or apply a radius. All of this is possible in an array of angular positions and in just one operation. Thanks to the optional support plate, even working with restricted spatial conditions is not a problem. You can quickly adjust the chamfer height and create chamfer lengths of up to 5 mm in 400 N/mm2 mild steel. The hold and guide handle, together with ideal machine dimensions, enables simple machine operation.
You can adjust the desired chamfer height quickly and without tools using a scaling function.
TruTool TKA 500 works quietly, quickly and with low vibration levels.
Multi-edge cutter mounts from 15° to 60° in 5° increments are available as an option.
Ideal for processing small parts of min. 50 mm x 50 mm and max. 300 mm x 300 mm.
The following consumables and the corresponding accessories are included in the scope of delivery.

Integrated

Integrated

1 unit 0353531

1 unit 0353793

1 unit 0068012

1 unit 1241272

1 unit 2488915

1 unit 1770951
Find the right consumables and accessories for your machine here.

With impeller Ø 22 mm for 3 multi-edge cutters. Suitable for 45° chamfer.

With impeller Ø 29.6 mm for 3 multi-edge cutters. Suitable for 30° chamfer.

With impeller Ø 22 mm for 3 multi-edge cutters. Suitable for 60° chamfer.

Can be used to process steel up to 400 N/mm2. Well-suited for processing chamfers of 0°, 15° - 60° (in increments of 5°).

Can be used to process steel up to 400 N/mm2 and aluminium up to 250 N/mm2. Well-suited for a radius of 2 mm.

Can be used to process steel up to 400 N/mm2 and aluminium up to 250 N/mm2.

Can be used to process chromium steel up to 800 N/mm2. Well-suited to processing chamfers of 0°, 15° - 60° (in increments of 5°).

Can be used to process CR steel up to 800 N/mm2. Well-suited for a radius of 2 mm.

Can be used to process aluminium up to 250 N/mm2. Well-suited for processing chamfers of 0°, 15° - 60° (in increments of 5°).

Can be used to process steel up to 400 N/mm2. Well-suited for processing corner seam radius R2 PLUS and R4 PLUS.

Can be used to process steel up to 400 N/mm2 and aluminium up to 250 N/mm2. Well-suited for processing a radius of 4 mm.

Can be used to process plasma application and steel up to 400 N/mm2. Well-suited for processing plasma radius of 3 mm.

With impeller Ø 20 mm for 3 multi-edge cutters. Well-suited to a radius of 2, 3 and 4 mm.

With impeller for corner seam radius 2 mm, sheet thicknesses approx. 1.5 mm to 2.5 mm

With impeller for corner seam radius 4 mm, sheet thicknesses approx. 2.5 mm to 5 mm

With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Suitable for 15° chamfer.

With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Suitable for 20° chamfer.

With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Suitable for 55° chamfer.

With impeller Ø 29.6 x 12.3 mm for 3 multi-edge cutters. Suitable for 35° chamfer.

With impeller Ø 29.6 x 12.3 mm for 3 multi-edge cutters. Suitable for 40° chamfer.

With impeller Ø 22 x 12.5 mm for 3 multi-edge cutters. Suitable for 50° chamfer.

With impeller Ø 22 x 12.5 mm for 3 multi-edge cutters. Suitable for 55° chamfer.

With impeller for plasma application. Well-suited for radius 3 mm plasma.

Impeller for multi-edge cutter mount, corner seam radius R2 PLUS

Impeller specifically for multi-edge cutter mount, corner seam radius R4 PLUS

Impeller Ø 22 x 14.5 mm for thin sheet min. 0.7 mm. Well-suited to chamfers between 45° and 60°.

Can be used in tight spaces. For all multi-edge cutter mounts.


For low-scratch processing




For deburring

Ideal for processing small parts in stationary use


TruTool TKA 500 without tool
|
TruTool TKA 500 45° tool
| |
---|---|---|
Maximum chamfer lengths | ||
Maximum chamfer length, steel 400 N/mm² | 7 mm | 7 mm |
Maximum chamfer length, steel 600 N/mm² | 3.7 mm | 3.7 mm |
Maximum chamfer length, steel 800 N/mm² | 2.3 mm | 2.3 mm |
Maximum chamfer length, aluminium 250 N/mm² | 10 mm | 10 mm |
Maximum chamfer heights | ||
Maximum chamfer height, steel 400 N/mm² | 4.9 mm | 4.9 mm |
Maximum chamfer height, steel 600 N/mm² | 2.5 mm | 2.5 mm |
Maximum chamfer height, steel 800 N/mm² | 1.6 mm | 1.6 mm |
Maximum chamfer height, aluminium 250 N/mm² | 6.4 mm | 6.4 mm |
Radii | ||
Smallest inner radius | 18 mm | 18 mm |
Smallest bore hole (Ø) | 35 mm | 35 mm |
General | ||
Minimum sheet thickness | 0.7 mm | 0.7 mm |
Working speed | 3 m/min - 4 m/min | 3 m/min - 4 m/min |
Nominal power consumption | 1400 W | 1400 W |
Speed during idle run | 8390 1/min | 8390 1/min |
Weight | ||
Weight without cable | 3.5 kg | 3.5 kg |
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.