TruTool N 1000, dimensional drawing
Powerful heavy-duty machine
The TruTool N 1000 has been specifically designed for use with thick sheets. It is well-suited in particular to use for dismantling tanks and containers. It cuts through doubled sheets as well as bends of up to 90°. You can use the TruTool N 1000 for nibbling through sheet thicknesses of up to 10 mm without feed force. It offers non-fatigue operation despite a machine weight of 14.7 kg. The handle can be rotated through 180°, providing perfect guidance of the machine.
Perfect cuts with 2-speed motor
Choose the right speed According to the material thickness, strength and type of workpiece.
4 cutting directions
The machine can be rotated 360° in 4 steps of 90°.
Rectangular punch with flexibility for profiles
Ideal for work in hard-to-reach areas and for cuts across edges and welding seams.
A powerful 2600 watts
Powerful motor and sophisticated gearing technology. For outstanding durability.
Flat sheet
For cutting straight sheets and producing sections from them. For notches, as well as radial and interior cutouts.
Profiles
For cutting profiles, cuts across edges and welding seams, as well as for dismantling tanks and containers.
Coil processing
For cutting coils, relief cuts and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.
Standard punch
1 unit 2260113
Die 10 (integrated)
1 unit 1884904
Handle
1 unit 0103555
Allen key DIN 911-12
1 unit 0067920
Tube of grease "S1", 25 g
1 unit 0121486
Tube of grease "S1", 250 g
1 unit 0385478
Punching and nibbling oil for steel, 500 ml
1 unit 0103387
Setting gauge
1 unit 1411767
Case
1 unit case 2277078
Find the right consumables and accessories for your machine here.
Standard punch
For processing aluminium and mild steel 400 N/mm2
1 unit
2260113
Set of 2
1264155
Set of 5
1264156
Punch CR
For processing stainless steel 600 N/mm2 and 800 N/mm2
1 unit
2260114
Set of 2
1264412
Set of 5
1264413
Die P10
Well-suited for processing profile sheets of 7 - 10 mm
1 unit
1884903
Set of 2
1264185
Die No. 5
For processing aluminium, mild steel and stainless steel 800 N/mm2 up to 5 mm
1 unit
1884909
Die No. 7
For processing aluminium, mild steel, and stainless steel 600 N/mm2 of 5 - 7 mm
1 unit
1884905
Set of 2
1264184
Die No. 10
For processing aluminium and mild steel of 7 - 10 mm
1 unit
1884904
Set of 2
1264177
Punch guide
1 unit
1884906
Set of 2
1264368
Wearing plate
Protects the die holder against excessive wear
Set of 2
1264375
Set of 5
1264376
Chip bag
To collect chips
1 unit
115215
Punching and nibbling oil for steel
500 ml bottle
103387
Punching and nibbling oil for aluminium
1000 ml bottle
125874
Case
1 unit
121585
TruTool N 1000 1st speed
|
TruTool N 1000 2nd speed
| |
|---|---|---|
| Maximum sheet thicknesses | ||
| Maximum sheet thickness, steel 400 N/mm² | 10 mm | 8 mm |
| Maximum sheet thickness, steel 600 N/mm² | 7 mm | 5 mm |
| Maximum sheet thickness, steel 800 N/mm² | 5 mm | 4 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 12 mm | 10 mm |
| Radii | ||
| Smallest radius | 300 mm | 300 mm |
| General | ||
| Working speed | 1 m/min | 1.6 m/min |
| Stroke rate at nominal load | 230 1/min | 370 1/min |
| Starting hole diameter | 75 mm | 75 mm |
| Nominal power consumption | 2600 W | 2600 W |
| Weight | ||
| Weight without cable | 14.7 kg | 14.7 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
