Powerful and flexible for profiles, up to a depth of 85 mm
With its short tool, the TruTool PN 200 is specifically designed for trapezoidal sheets up to a profile depth of 85 mm and C-L-U profiles. Its performance is powerful enough for up to 2 mm in mild steel and 1 mm in stainless steel and it cuts even doubled sheets. You can also rotate the tool through 360° on the spot. The cutting direction, punch and tool carrier can be changed quickly, without the need for tools. You can choose from various tool depths to broaden the areas of application.
For processing profile depths of up to 85 mm and C, L and U profiles. Also well-suited to corrugated sheet.
You can adjust the direction of processing easily through 360° in steps of 45°, without the need for tools.
The punch and tool carrier can be changed quickly without the need for tools.
Fast and powerful with 2.1 metres per minute in 400 N/mm2 mild steel.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unit 2260206
1 unit 2260207
1 unit 1884927
1 unit 1750693
1 unit 2260208
1 unit 0144680
1 unit 1763681
Find the right consumables and accessories for your machine here.
Thin-sheet die up to sheet thickness 1 mm
Protects the die holder against excessive wear
2 x punch, 1 x die and 2 x wearing plate
TruTool PN 200
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||2 mm|
|Maximum sheet thickness, steel 600 N/mm²||1.5 mm|
|Maximum sheet thickness, steel 800 N/mm²||1 mm|
|Maximum sheet thickness, aluminium up to 250 N/mm²||3 mm|
|Smallest radius||50 mm|
|Working speed||2.1 m/min|
|Stroke rate at nominal load||1500 1/min|
|Starting hole diameter||24 mm|
|Nominal power consumption||550 W|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.