You have selected United Kingdom. Based on your configuration, United States might be more appropriate. Do you want to keep or change the selection?

TruTool C 160 Li-ion with chip clipper | TRUMPF
TruTool C 160 chip clipper, Li-ion rechargeable battery
.NEW
TruTool C 160 chip clipper, Li-ion rechargeable battery
Battery-powered machines

TruTool C 160 chip clipper, 12V LiHD rechargeable battery

Slitting-shear-sprialduct-cut
Slitting-shear-sprialduct-cut
Battery-powered machines

TruTool C 160 chip clipper, 12V LiHD rechargeable battery

For processing spiral ducts

-/-

Handy battery-powered machine with chip clipper

The TruTool C 160 12V LiHD rechargeable battery with integrated chip clipper for two-handed operation is ideal for notching work and interior cutouts of up to 1.6 mm in mild steel and 1.2 mm in stainless steel. It enables you to clip chips at any point. The cuts are free of deformation and of high quality, and the 4.0 Ah / 12V LiHD rechargeable battery guarantees long runtimes.

Just right

Compact and practical 12V rechargeable battery. Compatible in its voltage class and with the 12V-36V recharger.

Brushless motor

Practically unlimited service life, virtually wear-free and hardly any maintenance. Battery performance per charge is also increased.

Chip cutter for two-handed operation

The chips are clipped with a three-quarter clockwise turn by means of a lever

For interior cutouts and notches

You can cut chips at any time and pull the machine out of the workpiece.

Slitting shears: video on the area of application
Dimensional drawing, TruTool C 160 with chip clipper, LiHD 12V rechargeable battery
TruTool C 160 with chip clipper, 12V LiHD rechargeable battery, dimensional drawing

Leading

The world's most powerful battery technology with 30 years of battery expertise from Metabo. Full compatibility within the 12V class, and also with CAS partner machines Universal recharger, regardless of whether you use 12V, 18V or 36V CAS batteries

Battery technology
Battery technology

LiHD rechargeable battery technology means more power, service life and runtime. It charges reliably using process-controlled charging and discharging management. The cells are protected by minimal temperature build-up and permanent electronic single cell protection (ESCP), even when used over very long periods. High-quality materials and intelligent battery management combined with brushless motors and Power-Head Technology mean longer runtimes. The battery pack's outer rubber coating also provides secure and non-slip stability as well as impact protection.

For any application
For any application

We offer 4 different cutters to suit particular applications: The CR cutter is ideal for processing stainless steel. The curve cutter provides outstanding performance for cutting curves. There are two different cutters for straight cuts: one cutter for processing thin sheets of up to 1 mm and one for use on sheet thicknesses of 1 mm – 1.6 mm. A quick-release locking bolt enables you to change the cutter quickly and easily without the need for tools.

Flat sheet

For cutting and trimming straight sheets. For radial and interior cutouts as well as notching.

Profiles

For cutting C-L-U profiles and longitudinal cuts in profile sheets.

Tubes

For cutting tubes.

Checker plate

For cutting checker plates. For radial and interior cutouts.

Rice grain sheet

For cutting rice grain sheets. For radial and interior cutouts.

-/-

The following consumables and the corresponding accessories are included in the scope of delivery.

TruTool C 160, cutter 1 - 1.6 mm
Straight cutter (integrated)

1 - 1.6 mm

TruTool C 160, cutting strip set
Cut guide set, 2 units with screws (integrated)

Set of 2 0927708

TruTool C 160, chip clipper
Chip clipper (integrated)

1 unit 1884910

Still image of accessories
Allen key DIN 911 - 2.5

1 unit 0067822

TruTool Li-ion rechargeable battery 10.8 V, 2 Ah
12V LiHD 4.0 Ah rechargeable battery (2 units)

1 unit 2598770

TruTool recharger 100 - 240 V
12V-36V recharger LG

1 unit, DE/CH version: 2569784
1 unit, GB version: 2569786
1 unit, USA version: 2569785

TruTool belt clip
Belt clip

1 unit 2579850

TRUMPF Box S1
TRUMPF Box S2

1 unit 1763682

Find the right consumables and accessories for your machine here.

TruTool C 160, cutter 1 - 1.6 mm
Straight cutter 1 - 1.6 mm

Ideal for sheet thicknesses of 1 - 1.6 mm.

Set of 2  1264343
Set of 5  1264345
TruTool C 160, cutter up to 1 mm
Straight cutter up to 1 mm

Ideal for sheet thicknesses up to 1 mm.

Set of 2  1264356
Set of 5  1264357
TruTool C 160, cutter CR
Cutter CR

Ideal for stainless steel and spiral ducts

Set of 2  1264346
Set of 5  1264347
TruTool C160, cutter set (straight cutter, curve cutter)
Cutter set

1 x straight cutter 1 mm, 1 x curve cutter

Set of 1  913521
TruTool C 160, cut guide set
Cut guide set

2 units with screws

Set of 1  927708
TruTool C 160, chip clipper
Chip clipper

For interior cutouts and notches

1 unit  1884910
Set of 2  1264370
TruTool C 160, spare parts set
Spare parts set

1x cut guide set, 1x chip clipper

Set of 1  927709
TruTool C 160, parallel stop
Parallel stop

For cutting parallel strips with width of 35 - 300 mm

1 unit  143439
LG 12V-36V recharger
LG 12V-36V recharger

For 12V and 18V LiHD rechargeable battery

1 unit (GB)  2569786
1 unit (USA)  2569785
1 unit (DE/CH)  2569784
12V LiHD 4.0Ah rechargeable battery
12V LiHD 4.0Ah rechargeable battery

1 unit  2598770
12V starter kit

1x LG 12V-36V recharger / 2x 12V LiHD 4.0Ah rechargeable battery

1 Set (GB)  2598819
1 Set (USA)  2598817
1 Set (DE)  2598815
Belt clip
Belt clip

Suitable for the 12V LiHD battery machines

1 unit  2579850
TRUMPF Box S2
TRUMPF Box S2

1 unit  1763682
Image of the technology inside the TRUMPF battery-powered machines

Power-Head Technology

The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimises energy loss and ensures even higher performance per battery charge.

Brushless motor

The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.

viewport test images /w Retina support

Small and handy

The 12V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. .All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.

Battery-powered machine, speed controller

Optimal working speed

You can use the speed controller to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 9 metres per minute. The speed controller is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.

TruTool C 160 with chip clipper Li-ion 10.8 V
Maximum sheet thicknesses  
Maximum sheet thickness, steel 400 N/mm² 1.6 mm
Maximum sheet thickness, steel 600 N/mm² 1.2 mm
Maximum sheet thickness, aluminium up to 250 N/mm² 2 mm
Spiral duct steel 400 N/mm² 4 x 0,63 mm
Radii  
Smallest radius 40 mm
General  
Working speed 5 m/min - 9 m/min
Stroke rate at nominal load 3520 1/min
Idle run stroke rate 5500 1/min
Starting hole diameter 15 mm
Voltage 12 V
Weight  
Weight (with 4 Ah rechargable battery) 1.5 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Contact
Power Tools Sales
Fax 01582 399261
E-mail
Downloads
Service & contact