Battery machine for precise cuts
The 10.8 V battery machine without chip clipper is particularly well-suited to cutting tasks without chip clipping during the cutting process. For example, if you are cutting straight sheets into sections or for curved cutting. The 10.8 V rechargeable battery provides an above-average runtime. The 2 Ah battery cuts around 70 metres in 400 N/mm2 mild steel at a sheet thickness of 0.8 mm. You can even double this service life with the 4 Ah battery.
For applications where chip clipping is not necessary during the cutting process.
A soft grip ensures a secure hold and enables low-vibration operation.
Ideal for straight, distortion-free cuts and C-L-U profiles.
For cutting and trimming flat sheets. For radial and interior cutouts as well as notching.
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
For cutting tubes.
For cutting checker plates. For radial and interior cutouts.
Rice grain sheet
For cutting rice grain sheets. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 - 1.6 mm
Set of 2 0927708
1 unit 0067822
1 unit 1886525
1 unit, DE version: 1886527
1 unit, CH version: 1886529
1 unit, GB version: 1886530
1 unit, USA version: 1886528
1 unit 1886524
1 unit 1763681
Find the right consumables and accessories for your machine here.
Ideal for sheet thicknesses of 1 - 1.6 mm.
Ideal for sheet thicknesses up to 1 mm.
Ideal for stainless steel and spiral ducts
1 x straight cutter 1 mm, 1 x curve cutter
2 units with screws
For recharger 100 - 240 V
For recharger 100 - 240 V
For Li-ion 10.8 V rechargeable battery with 2 Ah or 4 Ah. Incl. cable, available in DE, CH, GB and USA versions
For cutting parallel strips with width of 35 - 300 mm
In combination with a battery-optimised light-metal gear head, the current Li-ion battery technology forms the basis for the 10.8 V battery machines. The sophisticated details in the gear head are tailored to the voltage of the battery technology. The powerful 10.8 V battery is therefore easily comparable to a 14.4 V battery. The Li-ion battery machines are also available as solo machines.
Compact, lightweight and compatible
The 10.8 V battery machines are unrivalled in terms of their light weight, and their design is compact and ergonomic. This gives you a unique level of operator convenience and the utmost mobility. A soft grip on the motor housing ensures a secure hold and enables low-vibration operation. The 10.8 V Li-ion rechargeable batteries can be combined with all current TRUMPF battery machines and the recharger in their voltage class.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 9 metres per minute. The speed controller is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
TruTool C 160 Li-ion rechargeable battery 10.8 V
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||1.6 mm|
|Maximum sheet thickness, steel 600 N/mm²||1.2 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||2 mm|
|Spiral duct steel 400 N/mm²||4 x 0,63 mm|
|Smallest radius||90 mm|
|Working speed||5 m/min - 9 m/min|
|Idle run stroke rate||4300 1/min|
|Starting hole diameter||15 mm|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.