The handy alternative with chip clipper
The TruTool C 160 with integrated chip clipper for two-handed operation is an excellent match for notching work and interior cutouts of up to 1.6 mm in mild steel and 1.2 mm in stainless steel. It enables you to clip chips at any point. The machine can then be easily removed from the workpiece and re-positioned accurately. A clear view of the workpiece makes your work easier and results in high-quality and distortion-free cuts.
The chips are clipped with a three-quarter clockwise turn by means of a lever.
You can cut chips at any time and pull the machine out of the workpiece.
The low weight of the machine and the well-engineered ergonomics mean low fatigue levels during operation.
For perfect results, you can choose between 4 different cutters.
For cutting and trimming straight sheets. For radial and interior cutouts as well as notching.
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
For cutting tubes.
For cutting checker plates. For radial and interior cutouts.
Rice grain sheet
For cutting rice grain sheets. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 - 1.6 mm
Set of 2 0913520
1 unit 1884910
1 unit 0067822
1 unit 1763681
Find the right consumables and accessories for your machine here.
Ideal for sheet thicknesses of 1 - 1.6 mm.
Ideal for sheet thicknesses up to 1 mm.
Ideal for stainless steel and spiral ducts
1 x straight cutter 1 mm, 1 x curve cutter
2 units with screws
For interior cutouts and notches
1x cut guide set, 1x chip clipper
For cutting parallel strips with width of 35 - 300 mm
TruTool C 160 with chip clipper
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||1.6 mm|
|Maximum sheet thickness, steel 600 N/mm²||1.2 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||2 mm|
|Smallest radius||90 mm|
|Working speed||6 m/min - 10 m/min|
|Stroke rate at nominal load||3800 1/min|
|Starting hole diameter||15 mm|
|Nominal power consumption||350 W|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.