TruTool C 160, dimensional drawing
Ideal view for precise cutting
The cost-effective model without chip clipper is particularly well-suited to cutting tasks that do not involve chip clipping during the cutting process. For example, if you are cutting straight sheets into sections or for curved cutting. A clear view of the workpiece enables you to cut accurately. The chip is rolled away with a defined regularity and you avoid scratches on the workpiece. The TruTool C 160 cuts sheet thicknesses of up to 1.6 mm in mild steel and 1.2 mm in stainless steel.
Machine without chip clipper
For applications where chip clipping is not necessary during the cutting process.
Ideal for cutting into sections
Ideal for straight, distortion-free cuts and C-L-U profiles.
Particularly lightweight and ergonomic
The low weight of the machine and the well-engineered ergonomics mean low fatigue levels during operation.
For any application
For perfect results, you can choose between four different cutters.
Flat sheet
For cutting and trimming straight sheets. For radial and interior cutouts, as well as notches.
Profiles
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
Tubes
For cutting tubes.
Checker plate
For cutting checker plates. For radial and interior cutouts.
Rice grain sheet
For cutting rice grain sheets. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
Straight cutter (integrated)
1 - 1.6 mm
Cut guide set, 2 units with screws (integrated)
1 unit 0927708
Allen key DIN 911 - 2.5
1 unit 0067822
TRUMPF Box S1
1 unit 1763681
Find the right consumables and accessories for your machine here.
Straight cutter 1 - 1.6 mm
Ideal for sheet thicknesses of 1 - 1.6 mm.
Set of 2
1264343
Set of 5
1264345
Straight cutter up to 1 mm
Ideal for sheet thicknesses up to 1 mm.
Set of 2
1264356
Set of 5
1264357
Curve cutter
Good performance cutting curves. For sheet thicknesses up to 1 mm.
Set of 2
1264358
Set of 5
1264359
Cutter CR
Ideal for stainless steel and spiral ducts
Set of 2
1264346
Set of 5
1264347
Cutter set
1 x straight cutter 1 mm, 1 x curve cutter
Set of 1
913521
Cut guide set
2 units with screws
Set of 1
927708
Parallel stop
For cutting parallel strips with width of 35 - 300 mm
1 unit
143439
Lubricating grease G1
25 g
344969
250 g
1446686
900 g
139440
TRUMPF Box S1
1 unit
1763681
TruTool C 160
| |
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 1.6 mm |
| Maximum sheet thickness, steel 600 N/mm² | 1.2 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 2 mm |
| Radii | |
| Smallest radius | 90 mm |
| General | |
| Working speed | 6 m/min - 10 m/min |
| Stroke rate at nominal load | 3800 1/min |
| Starting hole diameter | 15 mm |
| Nominal power consumption | 350 W |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
