TruTool C 250 with chip clipper, dimensional drawing
Unbeatable and powerful
The TruTool C 250 provides unrivalled performance. It cuts sheet thicknesses of 2.5 mm in mild steel and 1.5 mm in stainless steel. It offers a unique added benefit in the form of the integrated chip clipper, which can be operated with one hand. You can cut chips single-handed at any time and pull the machine out of the workpiece. Thanks to the clearly visible marks on the cutting head, you can always re-position the machine accurately. The TruTool C 250 offers an impressive top cutting speed of up to 3 metres per minute.
Chip clipper for single-handed operation
Chips can be easily cut with one hand at the touch of a button without any difficulties.
Extremely powerful
The most powerful model of its class. For mild steel of up to 2.5 mm and stainless steel of up to 1.5 mm.
For interior cutouts and notches
You can cut chips at any time and pull the machine out of the workpiece.
For any application
For perfect results, you can choose between 5 different cutters.
Flat sheet
For cutting and trimming straight sheets. For radial and interior cutouts as well as notching.
Profiles
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
Spiral ducts
For cutting spiral ducts. For sheet thicknesses of 4x 0.9 mm or 6x 0.6 mm in mild steel, and 4x 0.6 mm in stainless steel.
Tubes
For cutting tubes.
Coil processing
For cutting coils. For relief cuts and sampling.
Checker plate
For cutting checker plates. For radial and interior cutouts.
Rice grain sheet
For cutting rice grain sheets. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
Straight cutter (integrated)
1.5 - 2.5 mm
Cutting blades, 2 units
Set of 2 1275275
TRUMPF Box S1
1 unit 1763681
Find the right consumables and accessories for your machine here.
Straight cutter 1.5 - 2.5 mm
Ideal for sheet thicknesses 1.5 - 2.5 mm
Set of 2
1279105
Set of 5
1279106
Straight cutter 0.5 - 1.5 mm
Ideal for sheet thicknesses 0.5 - 1.5 mm
Set of 2
1279107
Set of 5
1279108
Cutter SC
Ideal for spiral ducts up to 4 x 0.9 mm
Set of 2
1279109
Set of 5
1279110
Cut guide set
2 units with screws
Set of 1
1275275
Cutter plate
1 unit
1267770
Torx screwdriver
With T-handle TX20
1 unit
1775531
TRUMPF Box S1
1 unit
1763681
TruTool C 250 with chip clipper
| |
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 2.5 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 3 mm |
| Spiral duct steel 400 N/mm² | 4x 0,9 / 6 x 0,6 mm |
| Spiral duct steel 600 N/mm² | 4x 0,6 mm |
| Radii | |
| Smallest radius | 150 mm |
| General | |
| Working speed | 3 m/min - 10 m/min |
| Stroke rate at nominal load | 2400 1/min |
| Starting hole diameter | 22 mm |
| Nominal power consumption | 550 W |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
