We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.
New
2D laser cutting machines

TruLaser 2030 fiber

Powerful compact machine

Powerful compact machine

The TruLaser 2030 fiber is your easy introduction to highly productive laser cutting. Operation is intuitive – you can get started immediately and continuously benefit from the system performance. It does not require lots of room because the TruLaser 2030 fiber is compact and brings together its full power with minimal use of space.

Simple operation

Intuitive control panel with touch control and optimal view of the entire work area.

Powerful and fast

High cutting productivity and long-term reliability with the TruDisk disk laser.

Compact layout

The machine is available in different installation versions depending on your requirements.

Quick starting point, consistent success

Cut reliably from the first day onwards – continuously and for many years.

Cost-effective one-cutting-head strategy

You can use the same cutting unit to cut all types of material and sheet thicknesses.

Automated loading and unloading

LiftMaster Shuttle automatically loads and unloads parts for you.

Short non-productive times

The automatic nozzle changer increases speed and process reliability.

High availability

Benefit from a high level of availability – thanks to collision protection on the cutting head, for example.

TruLaser 2030 fiber
TruLaser 2030 fiber Automatisierung
- / -

Particularly fast in thin sheet

For sheet thicknesses from 1 to 12 mm, the TruLaser 2030 fiber makes the most of all of its strengths. It works especially quickly in this range, and exploits the productivity benefits of the solid-state laser compared to CO2 lasers.

High-quality and reliable with BrightLine fiber – even in thick sheets

BrightLine fiber is a combination of unique optics, cutting parameters and flow-optimised nozzles. The particular advantage of this is that cutting edges are even more high quality. The kerf is also wide enough in thick sheet metal that parts do not get stuck during part removal. Save a lot of time as a result, as you can easily remove parts.

Quicker piercing with PierceLine

Thanks to PierceLine, the TruLaser 2030 fiber also makes easy work of contours with lots of piercing, Save time for each piercing – it is particularly worthwhile for parts with lots of individual piercings. The end of the piercing is detected immediately; the cutting process starts more quickly.

Placeholder

Process non-ferrous metals with high process reliability

Strongly reflective non-ferrous metals can also be cut reliably with the robust TruDisk laser. Even copper cutting with nitrogen is possible thanks to the TruDisk laser.

- / -
TruLaser 2030 fiber
Dimensions  
Length 7800 mm
Width 5900 mm
Height 2900 mm
Weight  
Weight, basic machine 9500 kg
Maximum speed  
Simultaneous 140 m/min
Working range  
X axis 3000 mm
Y axis 1500 mm
Max. workpiece weight 900 kg
Laser-specific data - TruDisk 2001  
Max. laser power 2000 W
Max. sheet thickness, mild steel 16 mm
Max. sheet thickness, stainless steel 8 mm
Max. sheet thickness, copper 3 mm
Max. sheet thickness, brass 3 mm
Max. sheet thickness, aluminium 6 mm
Laser-specific data - TruDisk 3001  
Max. laser power 3000 W
Max. sheet thickness, mild steel 20 mm
Max. sheet thickness, stainless steel 16 mm
Max. sheet thickness, aluminium 12 mm
Max. sheet thickness, copper 6 mm
Max. sheet thickness, brass 6 mm
Laser-specific data - TruDisk 4001  
Max. laser power 4000 W
Max. sheet thickness, mild steel 25 mm
Max. Blechdicke Edelstahl 20 mm
Max. sheet thickness, aluminium 20 mm
Max. sheet thickness, copper 8 mm
Max. sheet thickness, brass 8 mm
Consumption values  
Average power input in production - TruDisk 2001 11 kW
Average power input in production - TruDisk 3001 13 kW
Average power input in production - TruDisk 4001 15 kW
PDF <1MB
Technical data sheet

The technical data of all product versions as a download.

High productivity and the best quality: powerful functions guarantee the best processing results.

Flexibility

TruDisk 2001, TruDisk 3001 or TruDisk 4001

Different lasers are available for your laser cutting machine depending on how much power you require: The TruDisk 2001 with 2 kW, the TruDisk 3001 with 3 kW or the TruDisk 4001 with 4 kW.

Installation versions

You can adapt the TruLaser 2030 fiber automation to your production quite simply. You can choose between different installation versions for this.

2D laser cutting machine, second laser output
Second laser output for use in the LaserNetwork

With the TruLaser 2030 fiber you can not only carry out cutting processes, but other applications are also made possible for your production in a cost-efficient manner. You can optionally share the laser with other machines – for example with a laser tube cutting machine or a laser welding cell. In addition, you can use your TruDisk laser flexibly in the laser network.

TruLaser 2030 fiber, space requirement
Low space requirements

All of the machine's key components, such as the laser, electrical cabinet or compact dust extractor are integrated into the machine frame. Including the pallet changer, the TruLaser 2030 fiber fits on an installation surface of 7.8 x 5.9 metres.

Customised automation – your capacity utilisation is what counts

Whether it's with low capacity utilisation or highly-productive multi-shift operation – you assemble your machine according to your requirements. With the TruLaser 2030 fiber, you can flexibly choose a manual pallet, a pallet changer or fully automated loading and unloading via LiftMaster Shuttle.

User-friendliness & process reliability

Everything under control

The 19-inch touch display makes work pleasant for the operator. But not just on the display – the operator also always has an overview of all the processes in the work area since the entire work area is clearly visible.

Automatic nozzle changer

With the automatic nozzle changer, you can leave your machine to operate in continuous operation. If the machine needs a different cutting nozzle for a new order, it takes care of this – without the operator having to intervene.

Collision protection

The collision protection for your cutting head guarantees process reliability – in the event of collisions between the cutting head and tilted parts, damage to the cutting head is prevented, meaning that you do not have to replace the cutting head. You benefit from shorter non-productive times due to increased machine availability.

Easy working, even for novices

The intuitive operation makes getting started in productive laser cutting easier; training outlay is minimal. Cutting parameters for all materials and sheet thicknesses are stored. You can create simple drawings and cutting programs directly on the machine with a few clicks.

One-cutting-head strategy

You save setup time with the TruLaser 2030 fiber – it is not necessary to change lenses or cutting heads, as all materials and sheet thicknesses are cut with the same cutting unit. The focal position and other parameters are automatically tailored to the material to be cut.

Quality

BrightLine fiber

BrightLine fiber provides you with high-quality cutting results over the entire sheet thickness range. At the same time, all of the advantages of the solid-state laser during thin sheet processing are retained, in particular the high speeds. The cutting edges are particularly smooth, meaning that you can quickly sort parts.

PierceLine

PierceLine monitors and controls the piercing process. This saves material and preserves the machine, increasing part quality and shortening the piercing time by up to 80%.

TruTops Boost

Construct and program your laser, punching and combination punch laser machines intelligently with TruTops Boost, your all-in-one 3D solution. Numerous automated processes save you time-consuming routine processes and the joint nesting pool saves time and material. You also always have an overview of all manufacturing orders and order-based work.

TruTops Monitor

Reduce your idle time. Record and analyse machine data, such as idle states, error messages, causes of malfunctions and maintenance periods for all of your production workplaces. If an idle state or a malfunction occurs, TruTops Monitor informs you immediately of the cause, allowing you to respond quickly.

Software

The extensive range of TruTops software supports you throughout the entire production process. Control your operational workflow in a simple and targeted manner, from managing your customer orders and purchasing processes to delivery of the produced parts. Through the direct coupling with the machine control, you can keep a constant eye on the status of your orders.

The LiftMaster Shuttle is available for automated processing

Loading and unloading

Automate the loading and unloading process of your TruLaser 2030 fiber using the LiftMaster Shuttle. Thanks to numerous installation versions, you can not only adapt the system to the space you have available, but also to the desired material flow in your production facility.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Punch laser machines

All the advantages of punch and laser processing combined: TRUMPF punch laser machines enable you to produce a wide range of parts in small or large quantities.

3D-Laserschneidanlagen von TRUMPF
3D laser cutting machines

Regardless of whether you need to cut 3D components, profiles or tubes – as a pioneer in 3D laser processing, TRUMPF can provide the perfect 3D laser cutting machine for your application.

Technologiebild TRUMPF Auflagenleistenreiniger
Laser slat cleaner

With the laser slat cleaner you can clean the slats of your flatbed laser machine fast, several times over. This means you can use the slats for considerably longer.

Service & contact