The highest values for positioning speed and axis acceleration reduce your production times, as well as piercing on-the-fly for cutting with the FastLine Cell, which reduces your non-productive time by up to 40%. The dynamic cutting optics enable very high acceleration, and the magnetic coupling on the working head reduces your downtime.
You are perfectly equipped with the TruLaser Cell Series 7000 laser system – no matter whether you want to process two or three-dimensional components or tubes. You can change flexibly between cutting, welding and laser metal deposition. The modular setup of the machine, as well as the option of individual adaptation and retrofitting, enable you to optimally customise the TruLaser Cell Series 7000 to a changing production environment and to react flexibly to changing customer requirements.
The modular principle and the fact that the machine can be retrofitted enable you to individually configure the machine.
Cutting, welding or laser metal deposition: change between all processes flexibly.
Technology tables and the automatic raw beam adjustment guarantee you the best quality.
The highest level of machine dynamics and numerous time-saving options enable you to produce in a cost-effective way.
A range of innovations, such as the ergonomic control panel, guarantee convenient operation.
Processing of galvanised steel
In the automotive industry in particular, components are frequently produced from galvanised steel to protect the components against corrosion. Using the TruLaser Cell Series 7000, you can cut galvanised steel sheets quickly and to a high quality level. The machine also enables you to react optimally to changes and to adapt the component accordingly. This increases flexibility, which is above all important in the field of prototype construction and pre-series production.
Laser-cut vehicle rear seat
The openings and the trimming of the deep-drawn component are created using the TruLaser Cell Series 7000. Especially for small quantities, processing with conventional punching tools is often too expensive. With the TruLaser Cell Series 7000, you can cut all of the required contours fast, reducing production costs.
Precise and fast laser cutting
Compared to alternative processes, such as milling, the TruLaser Cell Series 7000 offers a cost-effective alternative for complex components. The machine laser cuts all the outer contours and creates the through holes.
Laser-welded fan wheel
The laser processing of three-dimensional components such as the fan wheel make new geometrical design options possible. Your designs will save material, and you can achieve a weight reduction. Laser welding also considerably reduces reworking in comparison to standard procedures. You save time and prevent the component from becoming distorted.
Laser-welded electromagnetic fan clutch
Laser-welded electromagnetic fan clutch
Laser metal deposition of a maize chopper cutting disc
During the laser metal deposition of the maize chopper cutting disc, there are three productions steps which can be seen in the image. Bottom: before coating Middle: part coated with a layer of hard material Top: finished part.
Coating the bearing surface of a turbocharger using laser metal deposition
Laser metal deposition can be used to create functional coatings with improved mechanical and tribological properties on the bearing seats of various shafts. In the case of impellers in gas turbines, turbochargers or jet engines, it is also possible to repair damaged blades locally.
TruLaser Cell 7020
TruLaser Cell 7040
|Axis travel range|
|Max. number of axes||12||12|
|X axis travel range||2000 mm||4000 mm|
|Achsverfahrbereich Y-Achse||1500 / 2000 mm||1500 / 2000 mm|
|Z axis travel range||750 mm||750 mm|
|B axis travel range||± 135 °||± 135 °|
|C axis travel range||n x 360 °||n x 360 °|
|Axis travel range of dynamic cutting optics||± 10 mm||± 10 mm|
|Max. workpiece size|
|Max. workpiece size in X||1540 mm||3540 mm|
|Max. size of workpiece in Y (Web)||1040 / 1540 mm||1040 / 1540 mm|
|Max. workpiece size in Z||520 mm||520 mm|
|Max. axis speeds|
|Max. axis speed, axially parallel in X||100 m/min||100 m/min|
|Max. axis speed, axially parallel in Y||100 m/min||100 m/min|
|Max. axis speed, axially parallel in Z||100 m/min||100 m/min|
|Max. axis speed, simultaneous||173 m/min||173 m/min|
|Max. axis speed of B axis||90 1/min||90 1/min|
|Max. axis speed of C axis||90 1/min||90 1/min|
|Max. axis accelerations|
|Max. axis acceleration, axially parallel in X||9 m/s²||9 m/s²|
|Max. axis acceleration, axially parallel in Y||10 m/s²||10 m/s²|
|Max. axis acceleration, axially parallel in Z||10 m/s²||10 m/s²|
|Max. axis acceleration, simultaneous||16 m/s²||16 m/s²|
|Max. axis acceleration of B axis||200 rad/s²||200 rad/s²|
|Max. axis acceleration of C axis||100 rad/s²||100 rad/s²|
|Max. axis acceleration, dynamic cutting optics||40 m/s²||40 m/s²|
|Positioning accuracy of linear axes (X, Y, Z)||0.08 mm||0.08 mm|
|Positioning accuracy of rotary axes (B)||0.015 °||0.015 °|
|Max. laser power||2000 W - 6000 W||2000 W - 6000 W|
|Available lasers||TruFlow, TruDisk||TruFlow, TruDisk|
The technical data of all product versions as a download.
Numerous options make working with the TruLaser Cell 7000 not only easier, but, due to reduced non-productive times, also noticeably quicker and therefore more productive.
A partition wall separates the work area into two spaces. This means that set-up, loading, unloading and laser processing are possible at the same time in two-station operation, irrespective of the selected laser source (CO2 or solid-state laser).
You can optimise the TruLaser Cell Series 7000 specifically for highly productive series production using the rotational changer. You can increase productivity and ergonomics with just one loading and unloading position.
The linear changer can move the work tables in all axis directions. This makes the loading and unloading of large components considerably easier.
TruTops Cell provides you with everything you need for the convenient programming of your 3D laser processing. Thanks to integrated standard optics, it covers laser cutting, laser welding or laser metal deposition. It loads 3D CAD data via numerous interfaces, and corrects it if required. The system automatically creates cutting suggestions in all three dimensions. It also automatically suggests devices.
The extensive range of TruTops software supports you throughout the entire production process. Control your operational workflow in a simple and targeted manner, from managing your customer orders and purchasing processes to delivery of the produced parts. Through the direct coupling with the machine control, you can keep a constant eye on the status of your orders.
Visual Online Support (VOS)
Resolve even the most complex issues via the app – without the need for on-site deployment. Visual Online Support (VOS) enables you to exchange image, audio, and video files conveniently, quickly, and reliably, and thus avoid long machine downtimes.
Depending on the application, you can choose from a wide range of TRUMPF CO2 and solid-state lasers and select the perfect one for your needs. You can then combine this with the TruLaser Cell Series 7000.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.