TruTool TKA 700, dimensional drawing
Compact and powerful
Equipped with a powerful 1700 watt drive, the TruTool TKA 700 provides outstanding power with high torques and stable and safe machine control. You can give components clean visible edges, break sharp edges, apply a radius of 2, 3 or 4 mm or prepare a weld seam. All of this is possible with little effort and in an array of angular positions, from 0° - 60°. Chamfer lengths can be set continuously and without needing any tools, with the utmost precision and speed. Chamfer lengths of up to 5 mm can be produced in mild steel very easily in one operation. A second work step is required for a chamfer length of 7 mm. The perfectly designed hand grip reduces vibrations, provides ergonomics and stable machine control.
Perfect for every angle
Optionally, 0°-multi-edge cutter mounts and multi-edge cutter mounts from 15° to 60° are available in 5° increments.
Versatile use
For straight edges, inner and outer contours, holes and for tube processing.
Fixed setting
The selected chamfer length is maintained continuously throughout the entire processing procedure. This prevents accidental adjustment.
Operations
Chamfer lengths of up to 5 mm can be easily produced in one single operation. A second work step is required for a chamfer length of 7 mm.
Strong performance
The 1700-watt motor is extraordinarily compact, giving it a very high power density.
Reduced vibrations
Thanks to buffer elements in the gearing, combined with a perfectly positioned hand grip.
T-beams
For rounded edges with a radius of 2 mm, 3 mm or 4 mm. For deburring and welding seam preparation.
For straight and curved sheet parts
For rounded edges with a radius of 2 mm, 3 mm or 4 mm. For deburring and welding seam preparation.
The following consumables and the corresponding accessories are included in the scope of delivery.
TRUMPF Box M3
1 unit 1770951
Socket wrench
1 unit 1241272
Safety glasses
1 unit 2488915
Open-end wrench
1 unit 0068012
Torx screwdriver TX15 x 60
1 unit 0353793
Face wrench
1 unit 0353531
Multi-edge cutter mount 45° with impeller (integrated)
Integrated
3 multi-edge cutters CR (integrated)
Integrated
Find the right consumables and accessories for your machine here.
Front edge tool
1 unit
1645165
Punching and nibbling oil for aluminium
0125874
Impeller R2 PLUS
Impeller for multi-edge cutter mount, corner seam radius R2 PLUS
1 unit
1294750
Impeller for thin sheet
Impeller Ø 22 x 14.5 mm for thin sheet min. 0.7 mm. Well-suited to chamfers between 45° and 60°.
1 unit
1237451
40° multi-edge cutter mount
With impeller Ø 29.6 x 12.3 mm for 3 multi-edge cutters. Suitable for 40° chamfer.
Set of 1
1620265
55° multi-edge cutter mount
With impeller Ø 22 x 12.5 mm for 3 multi-edge cutters. Suitable for 55° chamfer.
Set of 1
1251684
Multi-edge cutters CR radius 2
Can be used to process CR steel up to 800 N/mm2. Well-suited for a radius of 2 mm.
Set of 3
1693744
30° multi-edge cutter mount
With impeller Ø 29.6 mm for 3 multi-edge cutters. Suitable for 30° chamfer.
Set of 1
1237683
Multi-edge cutters ST radius 3
Can be used to process steel up to 400 N/mm2 and aluminium up to 250 N/mm2.
Set of 3
1693742
Multi-edge cutters CR
Can be used to process chromium steel up to 800 N/mm2. Well-suited to processing chamfers of 0°, 15° - 60° (in increments of 5°).
Set of 10
1232628
Set of 3
1241851
Multi-edge cutters ST radius 2
Can be used to process steel up to 400 N/mm2 and aluminium up to 250 N/mm2. Well-suited for a radius of 2 mm.
Set of 3
1693743
Multi-edge cutters ST
Can be used to process steel up to 400 N/mm2. Well-suited for processing chamfers of 0°, 15° - 60° (in increments of 5°).
Set of 10
1232627
Set of 3
1241780
60° multi-edge cutter mount
With impeller Ø 22 mm for 3 multi-edge cutters. Suitable for 60° chamfer.
Set of 1
1257861
Spacer plate
For deburring
1 unit
1236998
Multi-edge cutters aluminium
Can be used to process aluminium up to 250 N/mm2. Well-suited for processing chamfers of 0°, 15° - 60° (in increments of 5°).
Set of 10
1232629
Set of 3
1241852
Lubricating grease G3
100 g
0353969
Multi-edge cutters ST R PLUS
Can be used to process steel up to 400 N/mm2. Well-suited for processing corner seam radius R2 PLUS and R4 PLUS.
Set of 10
1266784
Set of 3
1266783
35° multi-edge cutter mount
With impeller Ø 29.6 x 12.3 mm for 3 multi-edge cutters. Suitable for 35° chamfer.
Set of 1
1256570
Multi-edge cutters ST radius 4
Can be used to process steel up to 400 N/mm2 and aluminium up to 250 N/mm2. Well-suited for processing a radius of 4 mm.
Set of 3
1693629
Set of 10
1630310
50° multi-edge cutter mount
With impeller Ø 22 x 12.5 mm for 3 multi-edge cutters. Suitable for 50° chamfer.
Set of 1
1429605
Coated multi-edge cutters, radius 3
Can be used to process plasma application and steel up to 400 N/mm2. Well-suited for processing plasma radius of 3 mm.
Set of 2
1320642
Multi-edge cutter mount R, 2-sided
With impeller for plasma application. Well-suited for radius 3 mm plasma.
Set of 1
1484142
Multi-edge cutter mount R
With impeller Ø 20 mm for 3 multi-edge cutters. Well-suited to a radius of 2, 3 and 4 mm.
Set of 1
1663473
Impeller R4 PLUS
Impeller specifically for multi-edge cutter mount, corner seam radius R4 PLUS
1 unit
1294749
Multi-edge cutter mount R2 PLUS
With impeller for corner seam radius 2 mm, sheet thicknesses approx. 1.5 mm to 2.5 mm
Set of 1
1265985
Support plate
Can be used in tight spaces. For all multi-edge cutter mounts.
1 unit
1315258
Multi-edge cutter mount R4 PLUS
With impeller for corner seam radius 4 mm, sheet thicknesses approx. 2.5 mm to 5 mm
Set of 1
1264547
Protective films
For low-scratch processing
Set of 5
1234851
15° multi-edge cutter mount
With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Suitable for 15° chamfer.
Set of 1
1412639
Spacer plate guard plate
1 unit
1265501
20° multi-edge cutter mount
With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Suitable for 20° chamfer.
Set of 1
1619933
Work station
Ideal for processing small parts in stationary use
1 unit
1404742
25° multi-edge cutter mount
With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Suitable for 55° chamfer.
Set of 1
1419177
TRUMPF Box M3
1 unit
1770951
45° multi-edge cutter mount
With impeller Ø 22 mm for 3 multi-edge cutters. Suitable for 45° chamfer.
Set of 1
1227954
|
TruTool TKA 700 without tool
|
TruTool TKA 700 45° tool
|
|
|---|---|---|
| Maximum chamfer lengths / Maximum chamfer heights | ||
| Maximum chamfer length, steel 400 N/mm² | 7 mm | 7 mm |
| Maximum chamfer height, steel 400 N/mm² | 4.9 mm | 4.9 mm |
| Maximum chamfer length, steel 600 N/mm² | 3.7 mm | 3.7 mm |
| Maximum chamfer height, steel 600 N/mm² | 2.5 mm | 2.5 mm |
| Maximum chamfer length, steel 800 N/mm² | 2.3 mm | 2.3 mm |
| Maximum chamfer height, steel 800 N/mm² | 1.6 mm | 1.6 mm |
| Maximum chamfer length, aluminium 250 N/mm² | 10 mm | 10 mm |
| Maximum chamfer height, aluminium 250 N/mm² | 6.4 mm | 6.4 mm |
| Radii | ||
| Smallest inner radius | 18 mm | 18 mm |
| Smallest bore hole (Ø) | 35 mm | 35 mm |
| General | ||
| Minimum sheet thickness | 1.5 mm + hs | 1.5 mm + hs |
| Working speed (max.) | 4 m/min | 4 m/min |
| Nominal power consumption | 1700 W | 1700 W |
| Dimensions | ||
| Length | 365 mm | 365 mm |
| Height | 152 mm | 152 mm |
| Weight | ||
| Weight | 3.9 kg | 3.9 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
