Unbeatable and powerful
The TruTool C 250 provides unrivalled performance. It cuts sheet thicknesses of 2.5 mm in mild steel and 1.5 mm in stainless steel. It offers a unique added benefit in the form of the integrated chip clipper, which can be operated with one hand. You can cut chips single-handed at any time and pull the machine out of the workpiece. Thanks to the clearly visible marks on the cutting head, you can always re-position the machine accurately. The TruTool C 250 offers an impressive top cutting speed of up to 3 metres per minute.
Chips can be easily cut with one hand at the touch of a button without any difficulties.
The most powerful model of its class. For mild steel of up to 2.5 mm and stainless steel of up to 1.5 mm.
You can cut chips at any time and pull the machine out of the workpiece.
For perfect results, you can choose between 5 different cutters.
For cutting and trimming straight sheets. For radial and interior cutouts as well as notching.
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
For cutting spiral ducts. For sheet thicknesses of 4x 0.9 mm or 6x 0.6 mm in mild steel, and 4x 0.6 mm in stainless steel.
For cutting tubes.
For cutting coils. For relief cuts and sampling.
For cutting checker plates. For radial and interior cutouts.
Rice grain sheet
For cutting rice grain sheets. For radial and interior cutouts.
The following consumables and the corresponding accessories are included in the scope of delivery.
1.5 - 2.5 mm
Set of 2 1275275
1 unit 1763681
Find the right consumables and accessories for your machine here.
Ideal for sheet thicknesses 1.5 - 2.5 mm
Ideal for sheet thicknesses 0.5 - 1.5 mm
Ideal for spiral ducts up to 4 x 0.9 mm
2 units with screws
With T-handle TX20
TruTool C 250 with chip clipper
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||2.5 mm|
|Maximum sheet thickness, aluminium up to 250 N/mm²||3 mm|
|Spiral duct steel 400 N/mm²||4x 0,9 / 6 x 0,6 mm|
|Spiral duct steel 600 N/mm²||4x 0,6 mm|
|Smallest radius||45 mm|
|Working speed||3 m/min - 10 m/min|
|Stroke rate at nominal load||2400 1/min|
|Starting hole diameter||22 mm|
|Nominal power consumption||550 W|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.