For heating and ventilation engineers, TRUMPF seam lockers are essential for their daily work, as well as for the construction of façades, fireplace coverings or industrial fans. For both Pittsburgh lock seams as well as angle and standing seams, you will find the correct tool with TRUMPF.
The seam lockers operate with an automatic feed. This means you achieve a consistently high seam quality.
You can work quickly, and with low noise and vibration.
The seam lockers are ready for use in just a few steps; they are extremely easy to handle.
You can use the seam lockers directly at the assembly point, even on mounted ducts.
TruTool F 125
You can use the TruTool F 125 seam locker to lock prepared angle and standing seams with flange heights of up to 40 mm, even on tight corners and edges.
TruTool F 300
You can use the TruTool F 300 seam locker to work in sheet thicknesses of 0.75 mm – 1.25 mm mild steel and lock straight as well as curved ducts.
TruTool F 300 with 1400 W motor
This seam locker with its powerful motor is designed for continuous use. For straight or curved ducts with sheet thicknesses of 1 mm – 1.25 mm mild steel.
TruTool F 300 Li-ion rechargeable battery 18 V
The TruTool F 300 seam locker with 18 V Li-ion rechargeable battery allows even greater freedom. Adjustment to sheet thicknesses of 0.75 mm – 1.25 mm is automatic.
TruTool F 301
The TruTool F 301 seam locker is the perfect choice if you process sheet thicknesses of 0.45 mm – 1 mm mild steel. For straight or curved ducts.
TruTool F 301 Li-ion rechargeable battery 18 V
You can lock sheet thicknesses of 0.45 mm – 1 mm with the rechargeable battery seam locker. As with all seam lockers, the sheet thickness adjustment occurs automatically.
TruTool F 140
The TruTool F 140 seam locker is ideal for mild steel and stainless steel and locks large radii on straight as well as curved ducts. For sheet thicknesses of 0.6 mm – 1.4 mm.
TruTool F 140 for fan housing
This seam locker model has been developed for use on fan housings and locks radii from 100 mm. Even in stainless steel. For sheet thicknesses of 0.6 mm – 1.4 mm.