We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.
TruTool C 160 chip clipper
TruTool C 160 chip clipper
Slitting shears

TruTool C 160 with chip clipper

Slitting shears

TruTool C 160 with chip clipper

Cuts C-L-U profiles

viewport test images /w Retina support
Slitting shears

TruTool C 160 with chip clipper

Chip is rolled away with a defined regularity

    - / -
    • Overview
    • Applications
    • Scope of delivery
    • Accessories
    • Technical data
    • More Less
    The handy alternative with chip clipper

    The TruTool C 160 with integrated chip clipper for two-handed operation is an excellent match for notching work and interior cutouts of up to 1.6 mm in mild steel and 1.2 mm in stainless steel. It enables you to clip chips at any point. The machine can then be easily removed from the workpiece and re-positioned accurately. A clear view of the workpiece makes your work easier and results in high-quality and distortion-free cuts.

    Chip clipper for two-handed operation

    The chips are clipped with a three-quarter clockwise turn by means of a lever.

    For interior cutouts and notches

    You can cut chips at any time and pull the machine out of the workpiece.

    Particularly lightweight and ergonomic

    The low weight of the machine and the well-engineered ergonomics mean low fatigue levels during operation.

    For any application

    For perfect results, you can choose between 4 different cutters.

    Slitting shears: video on the area of application
    Dimensional drawing, TruTool C 160 with chip clipper
    TruTool C 160 with chip clipper, dimensional drawing

    Outstanding service life

    We offer 4 different cutters to suit particular applications: The CR cutter is ideal for processing stainless steel. The curve cutter provides outstanding performance for cutting curves. There are two different cutters for straight cuts: one cutter for processing thin sheets of up to 1 mm and one for use on sheet thicknesses of 1 – 1.6 mm.

    Flat sheet

    For cutting and trimming straight sheets. For radial and interior cutouts as well as notching.


    For cutting C-L-U profiles and longitudinal cuts in profile sheets.


    For cutting tubes.

    Checker plate

    For cutting checker plates. For radial and interior cutouts.

    Rice grain sheet

    For cutting rice grain sheets. For radial and interior cutouts.

    The following consumables and the corresponding accessories are included in the scope of delivery.

    TruTool C 160, Messer 1 - 1,6 mm
    Straight cutter (integrated)

    1 - 1.6 mm

    TruTool C 160, Schneidleistensatz
    Cut guide set, 2 units with screws (integrated)

    Set of 2 0913520

    TruTool C 160, Spanabtrenner
    Chip clipper (integrated)

    1 unit 1884910

    Zubehör Standbild
    Allen key DIN 911 - 2.5

    1 unit 0067822

    TRUMPF Box S1
    TRUMPF Box S1

    1 unit 1763681

    Find the right consumables and accessories for your machine here.

    TruTool C 160, cutter 1 - 1.6 mm
    Straight cutter 1 - 1.6 mm

    Ideal for sheet thicknesses of 1 - 1.6 mm.

    Set of 2 1264343
    Set of 5 1264345
    TruTool C 160, cutter up to 1 mm
    Straight cutter up to 1 mm

    Ideal for sheet thicknesses up to 1 mm.

    Set of 2 1264356
    Set of 5 1264357
    TruTool C 160, cutter CR
    Cutter CR

    Ideal for stainless steel and spiral ducts

    Set of 2 1264346
    Set of 5 1264347
    TruTool C160, cutter set (straight cutter, curve cutter)
    Cutter set

    1 x straight cutter 1 mm, 1 x curve cutter

    Set of 1 913521
    TruTool C 160, cut guide set
    Cut guide set

    2 units with screws

    Set of 1 927708
    TruTool C 160, chip clipper
    Chip clipper

    For interior cutouts and notches

    1 unit 1884910
    Set of 2 1264370
    TruTool C 160, spare parts set
    Spare parts set

    1x cut guide set, 1x chip clipper

    Set of 1 927709
    TruTool C 160, parallel stop
    Parallel stop

    For cutting parallel strips with width of 35 - 300 mm

    1 unit 143439
    TRUMPF Box S1

    1 unit 1763681
    TruTool C 160 with chip clipper
    Maximum sheet thicknesses  
    Maximum sheet thickness, steel 400 N/mm² 1.6 mm
    Maximum sheet thickness, steel 600 N/mm² 1.2 mm
    Maximum sheet thickness, aluminum up to 250 N/mm² 2 mm
    Smallest radius 90 mm
    Working speed 6 m/min - 10 m/min
    Stroke rate at nominal load 3800 1/min
    Starting hole diameter 15 mm
    Nominal power consumption 350 W
    PDF <1MB
    Technical data sheet

    The technical data of all product versions as a download.

    This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

    You may also find these topics interesting

    Another tool for roof and façade construction

    The TruTool PN 130 battery-powered profiling nibbler can be used universally for C-L-U profiles, trapezoidal and wavy sheets.

    TRUMPF Produkte in der Baubranche
    Construction industry

    Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

    Power-Head Technology

    Do you need to cut sheets cordlessly? Then we have the perfect tool for you in the form of our powerful 10.8 V battery-powered machines.


    Power Tools Sales
    Fax +44 1582 399261


    Power tools catalogue
    Power tools catalogue
    pdf - 9 MB
    Service & contact