We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.
TruTool C 160
TruTool C 160
Slitting shears

TruTool C 160

Slitting shear checker plate
Slitting shear checker plate
Slitting shears

TruTool C 160

For curved and straight cutting

    - / -
    • Overview
    • Applications
    • Scope of delivery
    • Accessories
    • Technical data
    • More Less
    Ideal view for precise cutting

    The cost-effective model without chip clipper is particularly well-suited to cutting tasks that do not involve chip clipping during the cutting process. For example, if you are cutting straight sheets into sections or for curved cutting. A clear view of the workpiece enables you to cut accurately. The chip is rolled away with a defined regularity and you avoid scratches on the workpiece. The TruTool C 160 cuts sheet thicknesses of up to 1.6 mm in mild steel and 1.2 mm in stainless steel.

    Machine without chip clipper

    For applications where chip clipping is not necessary during the cutting process.

    Ideal for cutting into sections

    Ideal for straight, distortion-free cuts and C-L-U profiles.

    Particularly lightweight and ergonomic

    The low weight of the machine and the well-engineered ergonomics mean low fatigue levels during operation.

    For any application

    For perfect results, you can choose between four different cutters.

    Slitting shears: video on the area of application
    TruTool C160 without chip clipper, dimensional drawing
    TruTool C 160, dimensional drawing

    CR cutter, for optimal processing of stainless steel
    Outstanding service life

    We offer four different cutters to suit particular applications: the CR cutter is ideal for processing stainless steel. The curve cutter provides outstanding performance for cutting curves. There are two different cutters for straight cuts: one cutter for processing thin sheets of up to 1 mm and one for use on sheet thicknesses of 1 – 1.6 mm.

    Flat sheet

    For cutting and trimming straight sheets. For radial and interior cutouts, as well as notches.

    For cutting C-L-U profiles

    Profiles

    For cutting C-L-U profiles and longitudinal cuts in profile sheets.

    For cutting tubes

    Tubes

    For cutting tubes.

    For cutting checker plate

    Checker plate

    For cutting checker plates. For radial and interior cutouts.

    For cutting rice grain sheet

    Rice grain sheet

    For cutting rice grain sheets. For radial and interior cutouts.

    The following consumables and the corresponding accessories are included in the scope of delivery.

    TruTool C 160, Messer 1 - 1,6 mm
    Straight cutter (integrated)

    1 - 1.6 mm

    TruTool C 160, Schneidleistensatz
    Cut guide set, 2 units with screws (integrated)

    1 unit 0927708

    Zubehör Standbild
    Allen key DIN 911 - 2.5

    1 unit 0067822

    TRUMPF Box S1
    TRUMPF Box S1

    1 unit 1763681

    Find the right consumables and accessories for your machine here.

    TruTool C 160, cutter 1 - 1.6 mm
    Straight cutter 1 - 1.6 mm

    Ideal for sheet thicknesses of 1 - 1.6 mm.

    Set of 2 1264343
    Set of 5 1264345
    TruTool C 160, cutter up to 1 mm
    Straight cutter up to 1 mm

    Ideal for sheet thicknesses up to 1 mm.

    Set of 2 1264356
    Set of 5 1264357
    TruTool C 160, curve cutter
    Curve cutter

    Good performance cutting curves. For sheet thicknesses up to 1 mm.

    Set of 2 1264358
    Set of 5 1264359
    TruTool C 160, cutter CR
    Cutter CR

    Ideal for stainless steel and spiral ducts

    Set of 2 1264346
    Set of 5 1264347
    TruTool C160, cutter set (straight cutter, curve cutter)
    Cutter set

    1 x straight cutter 1 mm, 1 x curve cutter

    Set of 1 913521
    TruTool C 160, cut guide set
    Cut guide set

    2 units with screws

    Set of 1 927708
    TruTool C 160, parallel stop
    Parallel stop

    For cutting parallel strips with width of 35 - 300 mm

    1 unit 143439
    Still image of accessories
    Lubricating grease G1

    25 g 344969
    250 g 1446686
    900 g 139440
    TRUMPF Box S1

    1 unit 1763681
    TruTool C 160
    Maximum sheet thicknesses  
    Maximum sheet thickness, steel 400 N/mm² 1.6 mm
    Maximum sheet thickness, steel 600 N/mm² 1.2 mm
    Maximum sheet thickness, aluminum up to 250 N/mm² 2 mm
    Radii  
    Smallest radius 90 mm
    General  
    Working speed 6 m/min - 10 m/min
    Stroke rate at nominal load 3800 1/min
    Starting hole diameter 15 mm
    Nominal power consumption 350 W
    PDF <1MB
    Technical data sheet

    The technical data of all product versions as a download.

    This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

    You may also find these topics interesting

    Profile-nibbler-trapezoidal-sheet
    Another tool for roof and façade construction

    The TruTool PN 130 battery-powered profiling nibbler can be used universally for C-L-U profiles, trapezoidal and wavy sheets.

    TRUMPF Produkte in der Baubranche
    Construction industry

    Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

    Technologiebild TRUMPF Akkumaschinen
    Power-Head Technology

    Do you need to cut sheets cordlessly? Then we have the perfect tool for you in the form of our powerful 10.8 V battery-powered machines.

    Contact

    Power Tools Sales
    Fax: +44 1582 399261
    E-mail

    Downloads

    Power tools catalogue
    Power tools catalogue
    pdf - 10 MB
    Service & contact