We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.


Atomize to Recreate


The atoms chipped off the target are distributed like gas. If the cathode and the substrate are properly arranged, the film particles will move toward the substrate.

Ideal für Großflächenbeschichtung

The PVD (Physical Vapor Deposition) method is used to apply thin films of micrometer thicknesses to materials of various qualities. In PVD processes, a block of material, consisting of the film material to be applied, is evaporated in a vacuum. This creates a gas mixture of atomic particles, which precipitate onto the material (substrate) to be coated.

In the plasma-enhanced PVD process, a cathode is evaporated by being bombarded with ions. This sputter or evaporation process can take place at room temperature. It is divided into the three stages: sputtering, diffusion and film growth.

Film growth

A certain percentage of the sputtered atoms hits the substrate and precipitates there. As a rule, crystalline films should be created, and in some cases, also amorphous films. Several conditions must be met at the same time for ultra-pure crystalline films to grow. These conditions are the correct substrate temperature and the correct kinetic energy of the impacting particles.

In addition, the film atoms require time to arrange themselves in regular crystal lattices. To achieve even film growth over the entire surface, the substrates move past the cathode in a planar manner at a speed of meters per minute. For a film that is to be coated on three sides, for example, the substrate rotates in front of the cathode to allow the film to be deposited on all sides.


A vacuum reaction chamber contains the non-reactive noble gas argon. In this chamber, a suitable direct current, medium or radio frequency voltage is applied. Thus, a low-temperature plasma ignites above the cathode (target) which consists of the film material. Positively charged argon ions are accelerated in the electrical field toward the cathode. On impact, these argon ions chip off particles from the cathode material. Eventually the cathode will be almost completely sputtered.


Dr. Daniel Krausse
Plasma RF

Dr. Jan Peter Engelstädter
Plasma MF
Service & contact