Battery machine for precise cuts
The 10.8 V battery machine, without chip clipper, is particularly well-suited to cutting tasks without chip clipping during the cutting process. For example if you are cutting straight sheets to length or for curved cutting. The 10.8 V battery provides an above-average runtime. The 2 Ah battery cuts around 70 meters in 400 N/mm2 mild steel at a sheet thickness of 0.8 mm. You can even double this service life with the 4 Ah battery.
A soft grip ensures a secure hold and enables low-vibration operation.
Well-suited for straight, distortion-free cuts and C-L-U profiles.
The following consumables and the corresponding accessories are included in the scope of delivery.

0.039 - 0.063 in

Set of 2 0927708

1 unit 0067822

1 unit 1886525

1 unit, DE version: 1886527
1 unit, CH version: 1886529
1 unit, GB version: 1886530
1 unit, USA version: 1886528

1 unit 1886524

1 unit 1763681
Find the right consumables and accessories for your machine here.

Ideal for sheet thicknesses of 0.39 - 0.63 in.

Ideal for sheet thicknesses up to 0.4 in.

Ideal for stainless steel and spiral ducts

1 x straight cutter 1 mm, 1 x curve cutter

2 units with screws

For cutting parallel strips with width of 35 - 300 mm


1x Ladegerät LG 12V-36V / 2x Akku 12V LiHD 4.0 Ah

Für LiHD-Akku 12V und 18V

Einsetzbar für die 12V LiHD Akkumaschinen


Power-Head Technology
In combination with a battery-optimized light-metal gear head, the current Li-ion battery technology forms the basis for the 10.8 V battery machines. The sophisticated details in the gear head are tailored to the voltage of the battery technology. The powerful 10.8 V battery is therefore readily comparable to a 14.4 V battery. The Li-ion battery machines are also available as solo machines.

Compact, lightweight, and compatible
The 10.8 V battery machines are unrivalled in terms of their light weight and their design is compact and ergonomic. This gives you a unique level of operator comfort and the utmost mobility. A soft grip on the motor housing ensures a secure hold and enables low-vibration operation. The 10.8 V Li-ion batteries can be interchanged with all current TRUMPF battery powered tools and chargers in their voltage class.

Optimal working speed
You can use the speed control to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 29.5 feet per minute. The speed control is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
TruTool C 160 Li-ion battery 10.8 V
| |
---|---|
Maximum sheet thicknesses | |
Maximum sheet thickness, steel 400 N/mm² | 1.6 mm |
Maximum sheet thickness, steel 600 N/mm² | 1.2 mm |
Maximum sheet thickness, aluminum up to 250 N/mm² | 2 mm |
Spiral duct, steel 400 N/mm² | 4 x 0,63 mm |
Radii | |
Smallest radius | 40 mm |
General | |
Working speed | 5 m/min - 9 m/min |
Stroke rate at nominal load | 3520 1/min |
Stroke rate during idle run | 5500 1/min |
Starting hole diameter | 15 mm |
Voltage | 12 V |
Weight | |
Weight (with 4 Ah rechargeable battery) | 1.5 kg |
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.