We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.
TruLaser Cell Series 7000, always perfectly equipped
TruLaser Cell Series 7000, always perfectly equipped
3D laser cutting machines

TruLaser Cell Series 7000

Always perfectly equipped

TruLaser Cell Series 7000 laser cutting
TruLaser Cell Series 7000 laser cutting
3D laser cutting machines

TruLaser Cell Series 7000

An all-around machine for various applications

    - / -
    • Overview
    • Applications
    • Technical Data
    • Options
    • Software
    • Laser
    • More Less
    Modular and highly flexible design

    You are perfectly equipped with the TruLaser Cell Series 7000 laser system – no matter whether you want to process two or three-dimensional components or tubes. You can change between cutting, welding, and laser metal deposition with flexibility. The modular machine set up, as well as the adjustment and retrofit options, enable you to ideally customize the TruLaser Cell Series 7000 to a changing production environment and to react to changing customer requirements with flexibility.

    Individualized entry

    The modular principle and the fact that the machine can be retrofitted enable you to individually configure the machine

    The greatest process flexibility

    Cutting, welding, or laser metal deposition: Change between all processes with flexibility.

    Unparalleled processing quality

    Technology tables and the automatic raw beam adjustment guarantee you the best quality.

    Cost-effective production

    The highest level of machine dynamics and numerous time-saving options enable you to produce in a cost-effective way.

    Simple and convenient operation

    A range of innovations, such as the ergonomic control panel, guarantee convenient operation.

    TruLaser Cell Series 7000, always perfectly equipped
    Cost-effective production

    The highest values for positioning speed and axis acceleration reduce your production times, as well as piercing on-the-fly for cutting with the FastLine Cell, which reduces your non-productive time by up to 40%. The dynamic cutting optics enable very high acceleration, and the magnetic coupling on the work head reduces your downtime.

    6D mouse for simple machine operation of the TruLaser Cell Series 7000
    Simple and convenient operation

    The ergonomic control panel is attached to the machine cabin, saving space. It can be rotated and operated from the cabin, or can be moved along the entire front of the machine. The 6D mouse makes it easy to run-in, teach, and move the axes quickly. The control automatically detects which optics are installed so that they can be changed quickly and without error.

    TruLaser Cell Serie 7000 - 2in1-Faser
    2-in-1 fiber

    The 2-in-1 fiber developed for operation with solid-state lasers makes welding and cutting possible with only one laser light cable. To switch between these processes, you simply need to change the process adapter and the system control adapts automatically to the laser beam. Not only do you achieve the best processing results, but your system is also easier to operate and can be used for significantly more applications.

    Laser cutting of galvanized steel sheet

    Processing of galvanized steel

    In the automotive industry in particular, components are frequently produced from galvanized steel to protect the components against corrosion. Using the TruLaser Cell Series 7000, you can cut galvanized steel sheets quickly and to a high quality level. The machine also enables you to react optimally to changes and to adapt the component accordingly. This increases flexibility, which is above all important in the field of prototype construction and pre-series production.

    Vehicle rear seat cut using the TruLaser Cell Series 7000

    Laser-cut vehicle rear seat

    The openings and the trimming of the deep-drawn component are created using the TruLaser Cell Series 7000. Especially for small quantities, processing with standard punching tools is often too expensive. With the TruLaser Cell Series 7000, you can cut all of the required contours fast, reducing production costs.

    Laser cutting with the TruLaser Cell Series 7000 with the highest precision

    Precise and fast laser cutting

    Compared to alternative processes, such as milling, the TruLaser Cell Series 7000 offers a cost-effective alternative for these components (cutting of aluminum die casting). The machine laser cuts all the outer contours and creates the through holes.

    Fan wheel laser cut with the TruLaser Cell Series 7000

    Laser-welded fan wheel

    The laser processing of three-dimensional components such as the fan wheel make new geometrical design options possible. Your designs will save material, and you can achieve a weight reduction. Laser welding also considerably reduces rework in comparison to standard procedures. You save time and prevent the component from becoming distorted.

    Electromagnetic fan clutch welded using the TruLaser Cell Series 7000

    Laser-welded electromagnetic fan clutch

    Laser-welded electromagnetic fan clutch

    Laser metal deposition with the TruLaser Cell Series 7000

    Laser metal deposition of a maize chopper cutting disc

    During the laser metal deposition of the maize chopper cutting disc, there are three productions steps which can be seen in the image. Bottom: Before coating Middle: Part coated with a layer of hard material Top: Finished part.

    Laser metal deposition on a turbine wheel with the TruLaser Cell Series 7000

    Coating the bearing surface of a turbocharger using laser metal deposition

    Laser metal deposition can be used to produce functional coatings with improved mechanical and tribological properties on the bearing seats of various shafts. In the case of impellers in gas turbines, turbochargers, or jet engines, it is also possible to repair damaged blades locally.

    TruLaser Cell 7020
    TruLaser Cell 7040
    Axis travel range    
    Max. number of axes 12 12
    X axis travel range 2000 mm 4000 mm
    Achsverfahrbereich Y-Achse 1500 / 2000 mm 1500 / 2000 mm
    Z axis travel range 750 mm 750 mm
    B axis travel range ± 135 ° ± 135 °
    C axis travel range n x 360 ° n x 360 °
    Axis travel range of dynamic cutting optics ± 10 mm ± 10 mm
    Max. size of workpiece    
    Max. size of workpiece in X 1540 mm 3540 mm
    Max. size of workpiece in Y (Web) 1040 / 1540 mm 1040 / 1540 mm
    Max. size of workpiece in Z 520 mm 520 mm
    Maximum axis speeds    
    Max axis speed, axially parallel in X 100 m/min 100 m/min
    Max axis speed, axially parallel in Y 100 m/min 100 m/min
    Max axis speed, axially parallel in Z 100 m/min 100 m/min
    Max. axis speed, simultaneous 173 m/min 173 m/min
    Max axis speed of B axis 90 RPM 90 RPM
    Max axis speed of C axis 90 RPM 90 RPM
    Max. axis acceleration    
    Max. axis acceleration, axially parallel in X 9 m/s² 9 m/s²
    Max. axis acceleration, axially parallel in Y 10 m/s² 10 m/s²
    Max. axis acceleration, axially parallel in Z 10 m/s² 10 m/s²
    Max. axis acceleration, simultaneous 16 m/s² 16 m/s²
    Max. axis acceleration of B axis 200 rad/s² 200 rad/s²
    Max. axis acceleration of C axis 100 rad/s² 100 rad/s²
    Max. axis acceleration, Dynamic cutting optics 40 m/s² 40 m/s²
    Positioning accuracy    
    Positioning accuracy of linear axes (X, Y, Z) 0.08 mm 0.08 mm
    Positioning accuracy of rotary axes (B) 0.015 ° 0.015 °
    Max. laser output 2000 W - 6000 W 2000 W - 6000 W
    Available lasers TruFlow, TruDisk TruFlow, TruDisk
    PDF <1MB
    Technical data sheet

    The technical data of all product versions as a download.

    Numerous options make working with the TruLaser Cell 7000 not only easier, but, due to reduced non-productive times, also noticeably quicker and therefore more productive.

    Zweistationentrennwand der TruLaser Cell Serie 7000
    Two-station partition wall

    A partition wall separates the work area into two spaces. This means that set-up, loading, unloading, and laser processing are possible at the same time in two-station operation, irrespective of the selected laser source (CO2 or solid-state laser).

    Rotationswechsler der TruLaser Cell Serie 7000
    Rotational changer

    You can optimize the TruLaser Cell Series 7000 specifically for highly productive series production using the rotational changer. You can increase productivity and ergonomics with just one loading and unloading position.

    Linearwechsler der TruLaser Cell Serie 7000
    Linear changer

    The linear changer can move the work tables in all axis directions. This makes the loading and unloading of large components considerably easier.


    Product image TruTops Cell

    TruTops Cell

    TruTops Cell provides you with everything you need for the convenient programming of your 3D laser processing. Due to integrated standard optics, it covers laser cutting, laser welding, and laser metal deposition. It loads 3D CAD data via numerous interfaces, and corrects it if required. The system automatically creates cutting suggestions in all three dimensions. It also automatically suggests devices.

    Depending on the application, you can choose from a wide range of TRUMPF CO2 and solid-state lasers and select the perfect one for your needs. You can then combine this with the TruLaser Cell Series 7000.

    TruFlow, reliable, robust, and versatile

    Reliable, robust, and versatile

    TruDisk, maximum performance from the disk

    Maximum performance from the disk

    This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

    You may also find these topics interesting

    TRUMPF Services Finanzierung Keyvisual

    A one-stop shop for machines and financing: Our transnational financing solutions are tailored to suit your circumstances and market.

    Technologiebild 2D-Laserschneidmaschinen
    Laser cutting machines

    Regardless of whether you need a CO2 or solid-state laser, we can offer the perfect 2D laser cutting machine to meet any requirement and can provide the ideal solution for any sheet metal type.

    TruLaser Cell 3000, Einzigartig universell
    TruLaser Cell 3000

    Compact and highly accurate: With the TruLaser Cell 3000 5-axis laser processing machine you can cut and weld in two or three dimensions.

    Service & contact