Compact and handy machine for profile sheets
The TruTool N 160 with extension is well-suited to processing deeper profile sheets and sheet thicknesses of 1.6 mm in mild steel. The elegant, slim design and the low machine weight provide the perfect conditions for ergonomic work. The cuts produced are precise, and you can progress quickly with your work without any flying sparks. The machine also stands out with its impressive price-performance ratio.
Depending on the geometry, the long tool enables you to easily cut trapezoidal sheets up to 60 mm in depth.
The cutting tool can be rotated in 8 steps of 45° without tools.
The machine fits comfortably in your hand with its weight of 1.5 kg and an optimal grip circumference.
You can change dies and punches quickly without additional tools.
The rotating punch reduces wear by ensuring the tool wears down evenly.
The soft grip minimizes vibrations and means you can work without getting tired.
For cutting C-L-U roof profiles
For corrugated and trapezoidal sheets. For trimming to length, cutting, diagonal cuts, interior cutouts, and radial cuts.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unti 2260177
1 unti 22601778
1 unti 2507897
1 unti 1763681
Find the right consumables and accessories for your machine here.
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel 400 N/mm²||1.6 mm|
|Maximum sheet thickness, steel 600 N/mm²||1 mm|
|Maximum sheet thickness, steel 800 N/mm²||0.7 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||2 mm|
|Smallest radius||24 mm|
|Working speed||2.4 m/min|
|Stroke rate at nominal load||2070 1/min|
|Starting hole diameter||22 mm|
|Nominal input power||350 W|
|Weight without cable||1.7 kg|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.