The TruTool N 160 E with extension is well-suited to processing profile sheets. The elegant, slim design and the low machine weight provide the perfect conditions for ergonomic work. This is also aided by four cutting directions. You can use the machine to process sheet thicknesses of 0.062 in. for mild steel and high-tensile materials of up to 0.027 in.
This Economy Line machine stands out with its impressive price-performance ratio.
You can rotate the cutting tool in four cutting directions in 90° steps.
The punch and die carrier can be changed quickly without tools.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unit 2260177
1 unit 2260178
Find the right consumables and accessories for your machine here.
For processing steel 400 N/mm2 with sheet thickness 1 - 1.6 mm
2 x punch and 1 x die
Up to sheet thickness 1 mm
|
TruTool N 160 with extension
|
|
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel up to 400 N/mm² | 1.6 mm |
| Maximum sheet thickness, steel up to 600 N/mm² | 1 mm |
| Maximum sheet thickness, steel up to 800 N/mm² | 0.7 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 2 mm |
| Radii | |
| Smallest radius | 40 mm |
| General | |
| Working Speed | 1.5 m/min |
| Stroke rate with nominal load | 1600 RPM |
| Starting hole diameter | 21 mm |
| Nominal power consumption | 350 W |
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
