TruTool TPC 165, dimensional drawing
Perfect cuts straight away
With the TruTool TPC 165 panel cutter, you can cut sandwich panels up to a thickness of 6.5 in. The blade insertion mechanism enables the production of accurate, perpendicular interior cutouts and notches. In one operation. The machine is ready for operation without presettings. Simply select the correct blade position and begin cutting. The TruTool TPC 165 can cut panels regardless of whether the surface is flat, trapezoidal, or corrugated.
Perpendicular cuts
Swiveling 90° blade, well-suited for perpendicular cutouts with a depth of up to 6.5 inches.
Unique
With the insertion mechanism, you can start at any position on the panels.
Up to four meters per minute
You can cut the upper and lower sheets in one press operation, without the need for reworking.
Compact and light
The TruTool TPC 165 weighs just 9.6 kg and is based on a sheet design that is both stable and light.
Flat sandwich panels
Roof panels. Steel or aluminum surface. Insulation material: Polyurethane foam, polyisocyanurate foam. For panel thicknesses up to 6.5 inches.
Corrugated sandwich panels
Roof panels. Steel or aluminum surface. Insulation material: Polyurethane foam, polyisocyanurate foam. For panel thicknesses up to 6.5 inches.
Trapezoidal sandwich panels up to 6.5 inches deep
Roof panels. Steel or aluminum surface. Insulation material: Polyurethane foam, polyisocyanurate foam. For panel thicknesses up to 6.5 inches.
The following consumables and the corresponding accessories are included in the scope of delivery.
Saw chain 165 (integrated)
1 unit 1730983
Blade 165 (integrated)
1 unit 1809537
Slide rail (integrated)
Set of 2 1814882
Wear plate (integrated)
1 unit 1814819
Wear plate, front
1 unit 1814820
Combination wrench
1 unit 1797742
Punching and nibbling oil for steel, 17 oz
1 unit 0103387
Case
1 unit 1798090
Find the right consumables and accessories for your machine here.
Saw chain
1 unit
1730983
Blade 165
1 unit
1809537
Slide rail
Set of 2
1814882
Wearing plate
1 unit
1814819
Front wearing plate TruTool TPC 165
1 unit
1814820
Guide rail
1,400 mm
1 unit
1831777
Connector
For guide rail
1 unit
1831778
Perpendicular cuts
By securing the blade, it is possible to set a cutting depth that corresponds to the cutting task. There are 13 positions to choose from, ranging from 0° to 90°. This results in a precise and even cutting depth without the need for rework. This even includes cutting tasks where the lower sheet side must not be cut through.
Unique
With the TruTool TPC 165, you can produce precise interior cutouts and notches effortlessly. This is possible in one press operation without the need to turn the panels. Clearly visible cutting markings ensure accurate cuts all along the cutting line. Additional table markings on the machine provide useful reference points for the blade insertion position.
Simple tool change
Replacing the chain and blade is quick and simple: Remove the protective cover, lift the saw chain with the blade out of the chain wheel, insert a new saw chain, and tighten. It is helpful and valuable to have the right combination wrench, kept in the machine and close at hand.
TruTool TPC 165
| |
|---|---|
| Panel cutter | |
| Maximum panel thickness | 165 mm |
| Maximum individual material thickness for steel up to 400 N/mm² | 0.9 mm |
| Insulation material | Polyurethane foam, polyisocyanurate foam |
| Smallest possible opening by piercing | 340 mm x 340 mm |
| General | |
| Working speed | 4 m/min |
| Cutting track width | 4 mm |
| Nominal input power | 1600 W |
| Weight | |
| Weight without cable | 9.6 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
