TruTool C 250 with chip clipper, Li-ion 18 V, dimensional drawing
The most powerful cordless slitting shears
The TruTool C 250 Li-ion rechargeable battery 18 V machines are the first slitting shears with rechargeable battery, which cordlessly cut sheet thicknesses of 2.5 mm in mild steel and 1.5 mm in stainless steel. You can cut chips single-handed at any time and pull the machine out of the workpiece with the integrated chip clipper that can be operated by one hand. Excellent for notching work and interior cutouts. The 18 V battery provides an above-average runtime. For example, with the 2 Ah rechargeable battery you can therefore cut up to 50 meters in mild steel and a sheet thickness of 1.5 mm.
For comfortable operation
A soft grip ensures low-vibration machine control. The machine is thereby extremely compact and light.
Chip clipper for single-handed operation
Chips can be easily cut with one hand at the touch of a button. Perfect for interior cutouts and notches.
Uniquely powerful
The first slitting shears with rechargeable battery for cutting mild steel up to 2.5 mm and stainless steel up to 1.5 mm.
Flat sheet
For cutting and trimming flat sheets. For radial and interior cutouts, as well as notches.
Profiles
For cutting C-L-U profiles and longitudinal cuts in profile sheets.
Spiral ducts
For cutting spiral ducts. For sheet thicknesses of 4 x 0.9 mm or 6 x 0.6 mm in mild steel, and 4 x 0.6 mm in stainless steel.
Tubes
For cutting checker plates. For radial and interior cutouts.
Corrugated sheet metal
For cutting corrugated sheet metal. For radial and interior cutouts.
Checker plate
For cutting checker plates. For radial and interior cutouts.
Coil processing
For cutting coils. For relief cuts and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.
Straight cutter (integrated)
0.06 - 0.1 in
Cutting blades, 2 units
Set of 2 1275275
2 Ah rechargeable battery 18 V (2 units)
1 unti 2272664
Charger 100 - 240 V incl. cable
1 unti 2272666
TRUMPF Box M2
1 unti 1770890
Find the right consumables and accessories for your machine here.
Straight cutter 1.5 - 2.5 mm
Ideal for sheet thicknesses 1.5 - 2.5 mm
Set of 2
1279105
Set of 5
1279106
Straight cutter 0.02 -0.06 in.
Ideal for sheet thicknesses 0.02 - 0.06 in.
Set of 2
1279107
Set of 5
1279108
Cutter SC
Ideal for spiral ducts up to 4 x 0.035 in.
Set of 2
1279109
Set of 5
1279110
Cutter CR
Ideal for sheet thicknesses 0.02 - 0.06 in.
Set of 2
1279142
Set of 5
1279143
Curve cutter
Good curvability. For sheet thicknesses up to 0.02 - 0.06 in. Left 1.77 in. / right 3.15 in.
Set of 2
1279145
Set of 5
1279146
Cutting strip set
2 units with screws
Set of 1
1275275
Cutter plate
1 unit
1267770
Torx screwdriver
With T-handle TX20
1 unit
1775531
Ladegerät LG 12V-36V
Für LiHD-Akku 12V und 18V
1 Stück (GB)
2569786
1 Stück (USA)
2569785
1 Stück (DE/CH)
2569784
Starter-Kit 18V
1x Ladegerät LG 12V-36V / 2x Akku 18V LiHD 4.0 Ah
1 Set (GB)
2598820
1 Set (USA)
2598818
1 Set (DE)
2598816
TRUMPF Box S2
1 unit
1763682
Compact, lightweight, and compatible
The 18 V battery machine has a compact and light design and allows fatigue-free work. The soft grip ensures safe and low-vibration working. You can combine the 18 V Li-ion rechargeable batteries with all current TRUMPF battery machines and the charger in their voltage class. The Li-ion battery machines are also available as solo machines.
Optimal working speed
You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.
TruTool C 250 with chip clipper, Li-ion rechargeable battery 18 V
| |
|---|---|
| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 2.5 mm |
| Maximum sheet thickness, steel 600 N/mm² | 1.5 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 3 mm |
| Spiral duct, steel 400 N/mm² | 4 x 0,9/ 6 x 0,6 mm |
| Spiral duct, steel 600 N/mm² | 4 x 0.6 mm |
| Radii | |
| Smallest radius | 150 mm |
| General | |
| Working speed | 3 m/min - 10 m/min |
| Stroke rate during idle run | 2950 1/min |
| Starting hole diameter | 22 mm |
| Voltage | 18 V |
| Weight | |
| Weight (with 4 Ah rechargeable battery) | 2.5 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
