Expand your part range by oversize format processing in a working area of 6 x 2.5 m with the TruLaser 3060 fiber. This machine not only opens up completely new dimensions for you, but due to the TruDisk disk laser, you can also achieve extremely high-quality cutting results. As a result of the TRUMPF functions, you can even cut thick mild steel with process reliability, resulting in smooth cutting edges and simple part removal. In the generous working range, you can also automatically process up to four medium format sheets one after the other – even if these sheets have different sheet thicknesses and are made of different materials.
Due to the multi-sheet processing function, you can also automatically process several small sheets on a pallet one after the other. This enables the cost-effective utilization of the machine, even for a lower proportion of oversize formats.
You can process sheets of 240 x 100 in. – more than for any other machine in this class.
With the CoolLine function, you can even create small contours in thick mild steel.
BrightLine fiber facilitates excellent part quality and seamless part removal.
Using Drop&Cut, you can easily post-produce parts from remainder sheets.
Condition Guide always monitors the condition of your machine.
Smart collision prevention reduces the risk of collisions during laser cutting.
Thin mild steel part
Your TruLaser 3060 fiber cuts extremely quickly, particularly in thin sheet.
Parts which are easy to remove
With BrightLine fiber, a sophisticated combination of special optics, along with the flow-optimized BrightLine nozzles and other technical innovations, the TruLaser 3060 fiber provides the highest part quality. The highlight: Due to the high-quality cutting edges, parts do not get caught during removal. It is easy to remove the parts and you save a lot of time.
Cutting of all common materials
The construction of the TruDisk enables the processing of non-ferrous metals with nitrogen – without worrying about reflections. TRUMPF also makes the processing of film-coated sheets possible.
Dicker Baustahl mit CoolLine geschnitten
The CoolLine process specifically cools the workpiece during laser cutting. This enables new geometries and increases process reliability for the processing of thick mild steel considerably.
TruLaser 3060 fiber
|X axis||6000 mm|
|Y axis||2500 mm|
|Max. workpiece weight||3000 kg|
|Laser-specific data - TruDisk 3001|
|Max. laser output||3000 W|
|Max. sheet thickness, mild steel||20 mm|
|Max. sheet thickness, stainless steel||15 mm|
|Max. sheet thickness, aluminum||15 mm|
|Max. sheet thickness, copper||6 mm|
|Max. sheet thickness, brass||6 mm|
|Laser-specific data - TruDisk 4001|
|Max. laser output||4000 W|
|Max. sheet thickness, mild steel||25 mm|
|Max. sheet thickness, stainless steel||20 mm|
|Max. sheet thickness, aluminum||15 mm|
|Max. sheet thickness, copper||8 mm|
|Max. sheet thickness, brass||8 mm|
|Laser-specific data - TruDisk 6001|
|Max. laser output||6000 W|
|Max. sheet thickness, mild steel||25 mm|
|Max. sheet thickness, stainless steel||25 mm|
|Max. sheet thickness, aluminum||25 mm|
|Max. sheet thickness, copper||10 mm|
|Max. sheet thickness, brass||10 mm|
|Average power input in production - TruDisk 3001||13 kW|
|Average power input in production - TruDisk 4001||15 kW|
|Average power input in production - TruDisk 6001||18 kW|
The technical data of all product versions as a download.
High productivity and the best quality: Powerful functions guarantee the best processing results.
AdjustLine enables the easy adjustment of the cutting process to materials of different quality. The function increases process reliability, especially when cutting poor quality material. For you this means less scrap and lower material costs. The operator can switch AdjustLine on or off at any time – programming is not required.
Collision protection for your cutting head guarantees the highest process reliability. You benefit from shorter non-productive times due to increased machine availability and process reliability. In the event of collisions, damage to the cutting head is avoided.
Mild steel becomes extremely hot during laser cutting and may melt uncontrollably. With CoolLine, this does not happen. During processing, the cutting head sprays water mist in a circle around the laser beam onto the workpiece. This is possible due to nozzles with precise bore holes. The vaporisation energy of the water means that the material around the laser beam is cooled. CoolLine therefore enables new geometries, closer nesting, and increases process reliability for the processing of thick mild steel considerably.
Clean protective glass ensures high cut quality for the long term. A sensor permanently monitors the condition of the protective glass so that you know when it must be changed. Cleaning and replacement are only carried out when required, saving costs.
Smart collision prevention reduces the risk of collisions during laser cutting to a minimum. From the part contours, the process detects the parts which are at risk of tilting. It then creates an optimized job processing strategy: The laser skillfully navigates around parts at risk of tilting. They are only cut free when there is no longer the risk of collision. This means you do not need to use microjoints, saving costly rework.
A camera system precisely determines the position of inserted sheets and enables the rework of parts which have already been cut with absolute precision. DetectLine also automatically measures a cut focusing comb and sets the focal position.
BrightLine fiber turns the solid-state laser into a universal tool: The function provides you with high-quality cutting results over the entire sheet thickness range. Furthermore, all of the advantages of the solid-state laser are retained, in particular the high speeds, during thin sheet processing.
PierceLine monitors and controls the piercing process. This saves material and preserves the machine, increasing part quality and shortening the piercing time by up to 80%.
During fusion cutting in thin sheets, the innovative performance nozzles and the optimized cutting data of the performance package provide you with two advances at the same time: A jump forward in quality, and considerably higher productivity.
Quick and economic – without compromising on quality: With Highspeed, you can set new records with the solid-state laser when it comes to cutting with nitrogen. As a result, you can almost double your sheet throughput for medium and thick mild steel and stainless steel sheets – the same goes for the feed rate. A special nozzle design also reduces your cutting gas consumption by up to 40%, and even prevents burr formation on contours with sharp edges.
Process reliability and operator support
The Dot Matrix Code function facilitates fast, process reliable part identification with a standardized industrial code. Within seconds, the laser in your flatbed laser machine applies a 2D code (data matrix) made out of dots onto a part. It contains information for the process chain. The code calls up the corresponding program at the next machine, for example.
With the MobileControl app from TRUMPF you can operate and monitor your machines simply and flexibly as the app transmits the interface of the standard control panel onto the touch screen of your tablet PC. The app enables you to call up different machine information at a variety of places in the machine work environment – such as the clearing area – or to change the program.
One glance is enough: Due to the new Condition Guide function, you are always informed about the condition of your machine. A traffic light system shows the status of important elements which influence the cutting capability of the machine. Condition Guide will give you recommendations for action as required. Process diagrams facilitate forecasting as to when action may need to be taken. Maintenance work can therefore be planned efficiently.
With Drop&Cut, the remainder sheet is utilized more easily, intuitively, and efficiently. A camera ensures the live image of the machine interior appears directly on your user interface. You can position any number of part geometries on the remainder sheet. This saves time during the post-production of individual parts. Time-consuming process steps such as aligning the sheet, sheet position measurement or zero point displacement are not needed.
Construct and program your laser, punching, and combined punch laser machines intelligently with TruTops Boost, your all-in-one 3D solution. Numerous automated processes save you time-consuming routine processes and the joint nesting pool saves time and material. You also always have an overview of all manufacturing orders and order-based work.
Reduce your idle time. Record and analyze machine data, including idle states, error messages, causes of malfunctions, and maintenance periods for all of your production workplaces. If an idle state or a malfunction occurs, TruTops Monitor will inform you immediately about the cause, allowing you to respond quickly.
The extensive range of TruTops software supports you throughout the entire production process. Control your operational workflow in a simple and targeted manner, from managing your customer orders and purchasing processes to delivery of the produced parts. Through the direct coupling with the machine control, you can keep a constant eye on the status of your orders.
Choose the right automation components for your laser cutting machine from a large modular system. From semi-automatic loading to a fully automatic processing cell with storage connection – TRUMPF provides solutions which optimize your process chain.
Your entry into automation: the LoadMaster enables the automatic loading of your machine with raw sheets.
Loading and unloading
With the LiftMaster Compact, you are choosing the fastest and most compact loading and unloading unit in the TRUMPF laser portfolio. While the suction plates unload sheets via the pallet changer, the rake frame can set down cut sheets on the synchronous loader.
Loading and unloading / Part sorting
The automation solution, LiftMaster, covers a broad range of automation functions. It loads and unloads, but is also suitable for pallet handling or part removal. The LiftMaster Sort also separates finished parts from the scrap skeleton, while LiftMaster Store and LiftMaster Store Linear connect your system directly to the store. The SortMaster automatically sorts finished parts.
Auxiliary pallet operation
The PalletMaster Tower enables flexible material handling around the clock. It combines the automatic changing of pallets with compact storage technology.
With the storage systems of the TruStore Series 1000 and TruStore Series 3000 you can organize your material handling according to your requirements.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.