For heating and ventilation engineers, TRUMPF seam lockers are essential for their daily work, as well as for the construction of façades, fireplace coverings or industrial fans. For both Pittsburgh lock seams as well as angle and standing seams, you will find the correct tool with TRUMPF.
The seam lockers operate with an automatic feed. This means you achieve a consistently high seam quality.
You can work quickly, and with low noise and vibration.
The seam lockers are ready for use in just a few steps; their handling is extremely simple.
You can use the seam lockers directly at the assembly point, even on mounted ducts.
TruTool F 125
You can use the TruTool F 125 seam locker to lock prepared angle and standing seams with flange heights of up to 1.57 in, even on tight corners and edges.
TruTool F 300
You can use the TruTool F 300 seam locker to work in sheet thicknesses of 0.03 - 0.05 in mild steel and lock straight as well as curved ducts.
TruTool F 300 with 1400 W motor
This seam locker with its powerful motor is designed for continuous use. For straight or curved ducts with sheet thicknesses of 1 mm – 1.25 mm in mild steel.
TruTool F 301
The TruTool F 301 seam locker is the perfect choice if you process sheet thicknesses of 0.45 mm – 1 mm in mild steel. For straight or curved ducts.
TruTool F 301 Li-Ion-Akku 18 V
Mit dem Akku-Falzschließer schließen Sie Blechdicken von 0,45 mm – 1 mm. Wie bei allen Falzschließern erfolgt die Blechdicken-Anpassung automatisch.
TruTool F 140
The TruTool F 140 seam locker is ideal for mild steel and stainless steel and locks large radii on straight as well as curved ducts. For sheet thicknesses of 0.6 mm – 1.4 mm.
TruTool F 140 for a fan housing
This seam locker model has been developed for use on fan housings and locks radii from 3.93 in. Even in stainless steel. For sheet thicknesses of 0.6 mm – 1.4 mm.