We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.
TruTool C 160
TruTool C 160
Slitting shears

TruTool C 160

Slitting shear for diamond plate
Slitting shear for diamond plate
Slitting shears

TruTool C 160

For curved and straight cutting

    - / -
    • Overview
    • Applications
    • Scope of delivery
    • Accessories
    • Technical Data
    • More Less
    Ideal view for precise cutting

    The cost-effective model without chip clipper is particularly well-suited to cutting tasks without chip clipping during the cutting process - for example, trimming straight sheets to length or cutting curves. A clear view of the workpiece enables you to cut accurately. The TruTool C 160 cuts sheet thicknesses of up to 0.06 inches in mild steel and 0.047 inches in stainless steel.

    Machine without chip clipper

    For applications where chip clipping is not necessary during the cutting process.

    Ideal for trimming to length

    Well-suited to straight, distortion-free cuts and C-L-U profiles.

    Particularly lightweight and ergonomic

    The machine's light weight and well-engineered ergonomics mean low fatigue levels during operation.

    For any application

    For perfect results, you can choose between four different cutters.

    Slitting shears: Video of an application area
    TruTool C160 without chip clipper, dimensional drawing
    TruTool C 160, dimensional drawing

    CR cutter, for optimal processing of stainless steel
    Outstanding service life

    We offer four different cutters to suit particular applications: the CR cutter is ideal for processing stainless steel. The curve cutter cuts with excellent contouring. There are two different cutters for straight cuts: one cutter for processing thin sheets of up to 0.04 inches and one for use on sheet thicknesses of 0.04 - 0.06 inches.

    Flat sheet

    For cutting and trimming flat sheets. For radial and interior cutouts, as well as notches.

    For cutting C-L-U profiles


    For cutting C-L-U profiles and longitudinal cuts in profile sheets.

    For cutting tubes


    For cutting tubes.

    For cutting diamond plate

    Checker plate

    For cutting checker plates. For radial and interior cutouts.

    For cutting diamond plate

    Corrugated sheet metal

    For cutting corrugated sheet metal. For radial and interior cutouts.

    The following consumables and the corresponding accessories are included in the scope of delivery.

    TruTool C 160, Messer 1 - 1,6 mm
    Straight cutter (integrated)

    0.039 - 0.063 in

    TruTool C 160, Schneidleistensatz
    Cutting strip set, 2 units with screws (integrated)

    1 unti 0927708

    Zubehör Standbild
    Allen key DIN 911 - 2.5

    1 unit 0067822

    TRUMPF Box S1
    TRUMPF Box S1

    1 unit 1763681

    Find the right consumables and accessories for your machine here.

    TruTool C 160, cutter 0.039 - 0.063 in
    Straight cutter 1 - 1.6 mm

    Ideal for sheet thicknesses of 0.39 - 0.63 in.

    Set of 2 1264343
    Set of 5 1264345
    TruTool C 160, cutter up to 1 mm
    Straight cutter up to 1 mm

    Ideal for sheet thicknesses up to 0.4 in.

    Set of 2 1264356
    Set of 5 1264357
    TruTool C 160, curve cutter
    Curve cutter

    Good performance cutting curves. For sheet thicknesses up to 0.039 in.

    Set of 2 1264358
    Set of 5 1264359
    TruTool C 160, cutter CR
    Cutter CR

    Ideal for stainless steel and spiral ducts

    Set of 2 1264346
    Set of 5 1264347
    TruTool C160, cutter set (straight cutter, curve cutter)
    Cutter set

    1 x straight cutter 1 mm, 1 x curve cutter

    Set of 1 913521
    TruTool C 160, cutting strip set
    Cutting strip set

    2 units with screws

    Set of 1 927708
    TruTool C 160, parallel stop
    Parallel stop

    For cutting parallel strips with width of 35 - 300 mm

    1 unit 143439
    Still image of accessories
    Lubricating grease G1

    25 g 344969
    250 g 1446686
    900 g 139440
    TRUMPF Box S1

    1 unit 1763681
    TruTool C 160
    Maximum sheet thicknesses  
    Maximum sheet thickness, steel up to 400 N/mm² 1.6 mm
    Maximum sheet thickness, steel up to 600 N/mm² 1.2 mm
    Maximum sheet thickness, aluminum up to 250 N/mm² 2 mm
    Smallest radius 90 mm
    Working Speed 6 m/min - 10 m/min
    Stroke rate with nominal load 3800 RPM
    Starting hole diameter 15 mm
    Nominal power consumption 350 W
    PDF <1MB
    Technical data sheet

    The technical data of all product versions as a download.

    This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

    You may also find these topics interesting

    Another tool for roof and façade construction

    The TruTool PN 130 battery-powered profiling nibbler can be used universally for C-L-U profiles, trapezoidal, and wavy sheets.

    TRUMPF Produkte in der Baubranche
    Construction industry

    Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

    Technologiebild TRUMPF Akkumaschinen
    Power-Head Technology

    Do you need to cut sheets cordlessly? Then we have the perfect tool for you in the form of our powerful 10.8 V battery-powered machines.


    Power Tools Sales
    Fax 41813076401


    Power tools catalog
    Power tools catalog
    pdf - 9 MB
    Service & contact