We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.

Glass processing

Hochgeschwindigkeitslaserschneiden von Glas

When cutting glass, lasers outshine conventional mechanical processes. Mechanical glass cutting requires very low speeds to prevent damage to the structure caused by micro-cracks and tension. In contrast, lasers use a non-contact processing method, which considerably speeds up the processing time. Furthermore, the mechanical components used in the conventional method are subject to wear and tear. As a result, they need regular maintenance to ensure the quality of the manufacturing components remains consistently high. Lasers do not have this problem.

Ultra-short laser pulses are particularly well suited to cutting glass, as the extremely high peak intensity means they can easily process the glass and produce cuts of superb quality. Alongside the beam source, another key factor when cutting glass is ensuring optimal beam guidance. Beam guidance, including along the beam axis, is an example of the latest innovations in optical technology designed to optimize the process speed and therefore, enable cost-effective glass cutting. As such, with its advance development work TRUMPF has conquered the third dimension of beam guidance, which enables the beam to be tailored to the requirements of transparent materials.

Flexible Geometrien beim Laserschneiden von Glas

With a conventional unmodified laser beam, the main aim is to achieve the greatest intensity, i.e., one that far exceeds the material's ablation threshold. However, this also wastes a lot of energy. The basic principle behind beam guidance is to distribute the beam intensity in the best possible way in order to make the process more effective. Instead of concentrating the greatest intensity on a very small area in the beam's focus, the beam intensity is distributed relatively equally over the beam axis, which maximizes effectiveness. As a result, the feed rate of the laser beam (and therefore, the cost-effectiveness of the process itself) can be improved by several orders of magnitude up to 1 meter per second and higher.

Summary: By selecting the appropriate laser parameters, such as the pulse energy, pulse overlap rate, and repetition rate, the development of micro-cracks can be prevented, which eliminates the need for expensive rework.

MaterialGlass
Conventional methodMechanical, chemical etching
ChallengeProcessing that causes minimal damage
LasersTruMicro 5070 / 5270
Wavelength1030 nm / 515 nm
Optical systemScanner, fixed optics
Max. pulse energy150 µJ
Speed3 - 1000 mm/s depending on the process and geometry
AdvantagesProcessing that causes minimal damage; no rework; the non-contact processing method means there is no tool wear; any geometry can be produced with minimal corrections; flexibility 

Products

TruMicro Serie 5000, Schnell und wirtschaftlich
TruMicro Series 5000

Quick and cost-effective

TOP Cleave Optik, Hochgeschwindigkeitslaserschneiden von Glas
TOP Cleave cutting optics

High-speed laser cutting of glass

Contact

Service & contact