You have selected Sverige. Based on your configuration, United States might be more appropriate. Do you want to keep or change the selection?

TruTool TSC 100 | TRUMPF
TruTool TSC 100
TruTool TSC 100
Slat cleaner

TruTool TSC 100

Slat cleaner

TruTool TSC 100

The machine adapts automatically to different slag thicknesses.


Your specialist for clean slats

With the TruTool TSC 100, you can clean your slats quickly and effortlessly. This ensures reliable, high-quality production of laser-cut components. By cleaning the slats regularly, you can increase their service life by up to three or four times.

Cost reduction up to 75%

With the TruTool TSC 100, you can clean slats multiple times before they need to be replaced.

Simultaneous cleaning and production

On a laser cutting machine with pallet changer, you can clean the slats even during the cutting process.

Outstanding cleaning results

With the TruTool TSC 100, you can thoroughly remove the accumulation of slag, even on slats subject to high loads.

1-man operation

With the long machine handle and good machine handling, you can clean the slats effortlessly by yourself.

How the cleaning works
Dimensional drawing, TruTool TSC 100
TruTool TSC 100, dimensional drawing

TruTool TSC 100, cleaning tool no. 3
Cleaning tool

Selecting the right tool means minimal effort during cleaning, helping you to achieve optimal cleaning results

TruLaser Series 3000

The TruTool TSC 100 can be used on virtually all CO2 and SSL 2D laser cutting machines

The TruTool TSC 100 can be used on virtually all CO2 and SSL 2D laser cutting machines.

TruTool TSC 100, Reinigungswerkzeug No. 3
Cleaning tool no. 3 incl. seal (integrated)

0.12 – 0.15 in
Set of 2 1644868

Zubehör Standbild
Transport device

1 unit 1634956

TruTool TSC 100, Distanzplatte
Spacer plate (integrated)

1 unit 1734714

TruTool TSC 100, Dichtung mit Funktionsüberwachung
Seal with functional monitoring feature (1x integrated, 1x included in delivery)

1 unit 2046587

Slide plate

1 unit 1619017

Zubehör Standbild
Allen wrench 4 mm

1 unit 0369003

Zubehör Standbild
Allen wrench 6 mm

1 unit 1640682

Find the right consumables and accessories for your machine here.

TruTool TSC 100, cleaning tool no. 2
Cleaning tool no. 2

For strip thickness 2 - 2.9 mm incl. seal

Set of 2  1644868
TruTool TSC 100, cleaning tool no. 3
Cleaning tool no. 3

For strip thickness 0.12 - 0.15 in. incl. seal

Set of 2  1644867
Still image of accessories
Transport device

1 unit  1634956
TruTool TSC 100, seal

1 unit  1633583
Still image of accessories

4 x sliding disk and 2 x seal

Set of 1  1681498
TruTool TSC 100, spacer plate
Spacer plate

If the height difference between the cross slat and slat is less than 60 mm

1 unit  1734714
Seal with functional monitoring feature

1 unit  2046587
TruTool TSC 100 cost comparison

Cost reduction up to 75%

The TruTool TSC 100 is a worthwhile purchase. It achieves savings of around 40% compared to manual cleaning, which involves a lot of effort and time. With the ability to clean slats multiple times, it is possible to save up to 75% of costs, compared with regular slat replacement.


Outstanding cleaning results

The TruTool TSC 100 adapts automatically to different slag thicknesses up to 1 inch and achieves optimal cleaning results, even in the case of stubborn stainless steel slag. The slats themselves are cleaned, as well as the spaces in between the teeth. A further benefit: You can insert the TruTool TSC 100 into any row of slats and clean these right up to the pallet edge while they are still installed.

TruTool TSC 100, seal with functional monitoring

Intelligent monitoring system

An intelligent monitoring system ensures safe and reliable work procedures. An integrated LED display uses a quick, continuous flash to notify you of when a seal needs to be replaced. As a result of the new seal function monitoring system, it is no longer necessary to perform a manual check at regular intervals, which was previously required. The maintenance interval is automatically controlled through an electronic display. This saves you time and prevents possible damage to the tool, which could occur if the seals are not checked and replaced at the specified maintenance intervals.

TruTool TSC 100, cleaning tool no. 3

Cleaning tool

Choose between tool no. 2 for slat thicknesses of 0.08 - 0.11 inches and tool no. 3 for 0.12 - 0.15 inches. The tools boast a long service life. Before being replaced, they are capable of cleaning an average of 10 standard pallets, which corresponds to 3281 feet.

TruTool TSC 100
Slat cleaner  
Slat thickness 2 mm - 3.9 mm
Max. slag thickness 25 mm
Min. distance between slats 33.5 mm
Working Speed 4 m/min - 8 m/min
Nominal power consumption 1400 W
Weight without cable 16.3 kg

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Service & contact