We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.
TruLaser 3030 Lean Edition, grows with your business
TruLaser 3030 Lean Edition, grows with your business
2D laser cutting machines

TruLaser 3030 Lean Edition

Grows with your business

  • Overview
  • Applications
  • Technical Data
  • Equipment
  • Software
  • Automation
  • More Less
Grows with your business

The TruLaser 3030 Lean Edition is a slimmed-down version of the TruLaser 3030. It provides a high level of productivity from the start, and can be upgraded at any time. Due to the compact installation with foldable pallet guides, you can flexibly integrate the TruLaser 3030 Lean Edition into existing or new lines in your production.

Flexible, modular machine concept

Numerous options and retrofits are possible, reducing the initial investment.

Perfect quality

With the TruFlow CO2 laser, you can achieve perfect, micro-burr-free cutting results.

Perfect edges

Achieve extremely smooth cutting edges in stainless steel with BrightLine.

Space-saving installation

Foldable pallet guides mean that part of the footprint can, at times, also be used for production.

Processing tubes

Cut tubes directly on your flatbed laser machine with RotoLas.

Intricate cutting even in thick mild steel

With the CoolLine function, you can even create small contours in thick mild steel.

Utilize remainder sheets – post-produce parts easily

Using Drop&Cut, you can easily post-produce parts from remainder sheets.

Increased machine availability

Condition Guide always monitors the condition of your machine.

TruLaser 3030 Lean Edition material handling

Tube processing

With RotoLas, you can expand your parts range with tubes and profiles – in the best quality.

TruLaser 3030 Lean Edition, BrightLine

Extremely smooth cutting edges with BrightLine

The BrightLine cutting procedure, the interaction between innovative components and a flow-optimized nozzle, enables the highest quality cuts to be made in thick stainless steel. The BrightLine fusion cutting produces an especially high-quality cutting edge here – a clear-cut mark of quality. This results in considerably less reworking, or often even no reworking at all.

TruLaser 3030, thick mild steel cut with CoolLine

Thick mild steel cut with CoolLine

The CoolLine process specifically cools the workpiece during laser cutting. This enables new geometries and considerably increases process reliability in thick mild steel. You can also work even more productively.

TruLaser 3030, thin stainless steel

Thin stainless steel

You can achieve perfect quality in thin stainless steel – even in intricate contours: The edges are burr-free and rework is no longer required.

- / -
TruLaser 3030 Lean Edition
Length 6300 mm
Width 7200 mm
Height 2200 mm
Maximum speed  
Simultaneous 140 m/min
Working range  
X axis 3000 mm
Y axis 1500 mm
Max. workpiece weight 900 kg
Laser-specific data - TruFlow 3200  
Max. laser output 3200 W
Max. sheet thickness, mild steel 20 mm
Max. sheet thickness, stainless steel 12.7 mm
Max. sheet thickness, aluminum 8 mm
Laser-specific data - TruFlow 4000  
Max. laser output 4000 W
Max. sheet thickness, mild steel 20 mm
Max. sheet thickness, stainless steel 15 mm
Max. sheet thickness, aluminum 10 mm
Consumption values  
Average power input in production - TruFlow 3200 29 kW
Average power input in production - TruFlow 4000 31 kW
Technical data sheet

The technical data of all product versions as a download.

High productivity and the best quality: Powerful functions guarantee the best processing results.

Process reliability


Mild steel becomes extremely hot during laser cutting and may melt uncontrollably. With CoolLine, this does not happen. During processing, the cutting head sprays water mist in a circle around the laser beam onto the workpiece. This is possible due to nozzles with precise bore holes. The vaporization energy of the water means that the material around the laser beam is cooled. CoolLine therefore enables new geometries and considerably increases process reliability in thick mild steel.


AdjustLine enables the easy adjustment of the cutting process to materials of different quality. The function increases process reliability, above all when cutting material of a poor quality. For you this means less scrap and lower material costs. The operator can switch AdjustLine on or off at any time – programming is not required.



With the additional RotoLas device, you can also process tubes on your 2D laser cutting machine, even the corners of rectangular tubes. You can convert your machine from flatbed to tube processing within a very short time. A flexible loading system feeds different tubes and profiles completely reliably. Support is provided by the TruTops Tube programming system, which calculates the cutting speed and travel motion of the Z axis with precision.


Smart collision prevention 1

Smart collision prevention reduces the risk of collisions during laser cutting to a minimum. From the part contours, the process detects the parts which are at risk of tilting. It creates an optimized job processing strategy: The laser skillfully navigates around parts at risk of tilting. They are only cut free when there is no longer the risk of collision. This means you do not need to use microjoints, saving costly rework.


A camera system precisely determines the position of inserted sheets and enables the rework of parts which have already been cut with absolute precision. DetectLine also automatically measures a cut focusing comb and sets the focal position.


BrightLine fusion cutting

With BrightLine you can achieve the perfect sectional view. Special cutting data and the BrightLine nozzle with adapted cutting gas jet considerably improve the quality of the cutting edges. The process demonstrates its advantages in thick stainless steel in particular. The BrightLine fusion cutting creates smooth edges which are a clear-cut benefit for you. Reworking is no longer required.


PierceLine monitors and controls the piercing process. This saves material and preserves the machine, increasing part quality and shortening the piercing time by up to 80%.

Process reliability & user-friendliness

TruLaser 3030 Lean Edition, Condition Guide
Condition Guide

One glance is enough: Due to the new Condition Guide function, you are always informed about the condition of your machine. A traffic light system shows the status of important elements which influence the cutting capability of the machine. Condition Guide will give you recommendations for action as required. Process diagrams facilitate forecasting as to when action may need to be taken. Maintenance work can therefore be planned efficiently.

Dot Matrix Code 1

The Dot Matrix Code function facilitates fast, process reliable part identification with a standardized industrial code. Within seconds, the laser in your flatbed laser machine applies a 2D code (data matrix) made out of dots onto a part. It contains information for the process chain. The code calls up the corresponding program at the next machine, for example.

MobileControl app

With the MobileControl app, you can operate and monitor your machines easily and with flexibility as the app transmits the interface of the standard control panel onto the touch screen of your tablet PC. The app enables you to call up different machine information at different places in the working environment of the machine, such as the clearing area, or to change the program.


With Drop&Cut, the remainder sheet is utilized more easily, intuitively, and efficiently. A camera ensures the live image of the machine interior appears directly on your user interface. You can position any number of part geometries on the remainder sheet. This saves time during the post-production of individual parts. Time-consuming process steps such as aligning the sheet, sheet position measurement or zero point displacement are not needed.

TruTops Boost

Construct and program your laser, punching, and combined punch laser machines intelligently with TruTops Boost, your all-in-one 3D solution. Numerous automated processes save you time-consuming routine processes and the joint nesting pool saves time and material. You also always have an overview of all manufacturing orders and order-based work.

TruTops Monitor

Reduce your idle time. Record and analyze machine data, including idle states, error messages, causes of malfunctions, and maintenance periods for all of your production workplaces. If an idle state or a malfunction occurs, TruTops Monitor will inform you immediately about the cause, allowing you to respond quickly.

Software process cycle


The extensive range of TruTops software supports you throughout the entire production process. Control your operational workflow in a simple and targeted manner, from managing your customer orders and purchasing processes to delivery of the produced parts. Through the direct coupling with the machine control, you can keep a constant eye on the status of your orders.

Choose the right automation components for your laser cutting machine from a large modular system. From semi-automatic loading to a fully automatic processing cell with storage connection, TRUMPF provides solutions which optimize your process chain.



Your entry into automation: The LoadMaster enables the automatic loading of your machine with raw sheets.

LiftMaster Compact

Loading and unloading

The compact LiftMaster Compact loads and unloads your machine completely automatically and extremely fast. With the LiftMaster Linear Basic you have the option of multiple-machine connection.


Loading and unloading / Part sorting

The automation solution, LiftMaster, covers a broad range of functions. It loads and unloads, but is also suitable for pallet handling or part removal. The LiftMaster Sort also separates finished parts from the scrap skeleton. LiftMaster Store and LiftMaster Store Linear connect your system directly to the store. The SortMaster automatically sorts finished parts.

PalletMaster Tower

Auxiliary pallet operation

The PalletMaster Tower enables flexible material handling around the clock. It combines the automatic changing of pallets with compact storage technology.

TruStore Series 1000

Storage system

With the storage systems of the TruStore Series 1000 and TruStore Series 3000 you can organize your material handling according to your requirements.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

  • * This function is available as a test or rental version.

You may also find these topics interesting

Technologiebild TRUMPF Auflagenleistenreiniger
Laser slat cleaner

With the laser slat cleaner you can clean the slats of your flatbed laser machine fast, several times over. This means you can use the slats for considerably longer.

Punch laser machines

All the advantages of punch and laser processing combined: TRUMPF punch laser machines enable you to produce a wide range of parts in small or large quantities.

3D-Laserschneidanlagen von TRUMPF
3D laser cutting

Regardless of whether you need to cut 3D components, profiles, or tubes – as a pioneer in 3D laser processing, TRUMPF can provide the perfect 3D laser cutting machine for your application.

Service & contact