We use cookies for this website. If you continue to use this website without changing the settings for cookies, we assume that you agree to the use of cookies.
TruTool C 160
TruTool C 160
Slitting shears

TruTool C 160

Slitting shear for diamond plate
Slitting shear for diamond plate
Slitting shears

TruTool C 160

For curved and straight cutting

- / -
Ideal view for precise cutting

The cost-effective model without chip clipper is particularly well-suited to cutting tasks without chip clipping during the cutting process - for example, trimming straight sheets to length or cutting curves. A clear view of the workpiece enables you to cut accurately. The TruTool C 160 cuts sheet thicknesses of up to 0.06 inches in mild steel and 0.047 inches in stainless steel.

Machine without chip clipper

For applications where chip clipping is not necessary during the cutting process.

Ideal for trimming to length

Well-suited to straight, distortion-free cuts and C-L-U profiles.

Particularly lightweight and ergonomic

The machine's light weight and well-engineered ergonomics mean low fatigue levels during operation.

For any application

For perfect results, you can choose between four different cutters.

Slitting shears: Video on the area of application
TruTool C160 without chip clipper, dimensional drawing
TruTool C 160, dimensional drawing

CR cutter, for optimal processing of stainless steel
Outstanding service life

We offer four different cutters to suit particular applications: the CR cutter is ideal for processing stainless steel. The curve cutter cuts with excellent contouring. There are two different cutters for straight cuts: one cutter for processing thin sheets of up to 0.04 inches and one for use on sheet thicknesses of 0.04 - 0.06 inches.

Flat sheet

For cutting and trimming flat sheets. For radial and interior cutouts, as well as notches.

For cutting C-L-U profiles

Profiles

For cutting C-L-U profiles and longitudinal cuts in profile sheets.

For cutting tubes

Tubes

For cutting tubes.

For cutting diamond plate

Checker plate

For cutting checker plates. For radial and interior cutouts.

For cutting diamond plate

Corrugated sheet metal

For cutting corrugated sheet metal. For radial and interior cutouts.

- / -

The following consumables and the corresponding accessories are included in the scope of delivery.

TruTool C 160, Messer 1 - 1,6 mm
Straight cutter (integrated)

0.039 - 0.063 in

TruTool C 160, Schneidleistensatz
Cutting strip set, 2 units with screws (integrated)

1 unti 0927708

Zubehör Standbild
Allen key DIN 911 - 2.5

1 unit 0067822

TRUMPF Box S1
TRUMPF Box S1

1 unit 1763681

Find the right consumables and accessories for your machine here.

TruTool C 160, cutter 0.039 - 0.063 in
Straight cutter 1 - 1.6 mm

Ideal for sheet thicknesses of 0.39 - 0.63 in.

Set of 2 1264343
Set of 5 1264345
TruTool C 160, cutter up to 1 mm
Straight cutter up to 1 mm

Ideal for sheet thicknesses up to 0.4 in.

Set of 2 1264356
Set of 5 1264357
TruTool C 160, curve cutter
Curve cutter

Good performance cutting curves. For sheet thicknesses up to 0.039 in.

Set of 2 1264358
Set of 5 1264359
TruTool C 160, cutter CR
Cutter CR

Ideal for stainless steel and spiral ducts

Set of 2 1264346
Set of 5 1264347
TruTool C160, cutter set (straight cutter, curve cutter)
Cutter set

1 x straight cutter 1 mm, 1 x curve cutter

Set of 1 913521
TruTool C 160, cutting strip set
Cutting strip set

2 units with screws

Set of 1 927708
TruTool C 160, parallel stop
Parallel stop

For cutting parallel strips with width of 35 - 300 mm

1 unit 143439
Still image of accessories
Lubricating grease G1

25 g 344969
250 g 1446686
900 g 139440
TRUMPF Box S1

1 unit 1763681
TruTool C 160
Maximum sheet thicknesses  
Maximum sheet thickness, steel up to 400 N/mm² 1.6 mm
Maximum sheet thickness, steel up to 600 N/mm² 1.2 mm
Maximum sheet thickness, aluminum up to 250 N/mm² 2 mm
Radii  
Smallest radius 90 mm
General  
Working Speed 6 m/min - 10 m/min
Stroke rate with nominal load 3800 RPM
Starting hole diameter 15 mm
Nominal power consumption 350 W
PDF <1MB
Technical data sheet

The technical data of all product versions as a download.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Profile-nibbler-trapezoidal-sheet
Another tool for roof and façade construction

The TruTool PN 130 battery-powered profiling nibbler can be used universally for C-L-U profiles, trapezoidal, and wavy sheets.

TRUMPF Produkte in der Baubranche
Construction industry

Robust and durable – TRUMPF's power tools for metal processing and its generators for glass coating are tailored to the industry.

Technologiebild TRUMPF Akkumaschinen
Power-Head Technology

Do you need to cut sheets cordlessly? Then we have the perfect tool for you in the form of our powerful 10.8 V battery-powered machines.

Contact

TRUMPF Maskin AB
Fax +46 326 064 43
E-mail

Downloads

Power tools catalog
Power tools catalog
pdf - 9 MB
Service & contact