Edge preparation in one operation
With the TruTool TKA 500, you can give components clean visible edges, break sharp edges, or apply a radius. All of this in a variety of angles and in just one operation. With the optional support plate, working in space restricted conditions is not a problem. You can quickly adjust the chamfer height and create chamfer lengths of up to 0.2 inches in 57,000 mild steel. The hold and guide handle, together with ideal machine dimensions, enables simple machine operation.
You can adjust the desired chamfer height quickly and without tools using a scaling function.
TruTool TKA 500 works quietly, quickly, and with low vibration levels.
Multi-edge cutter mounts from 15° - 60° are available in 5° increments as an option.
Well-suited for processing small parts of min. 2 x 2 inches and max. 12 x 12 inches.
The following consumables and the corresponding accessories are included in the scope of delivery.

Integrated

Integrated

1 unit 0353531

1 unit 0353793

1 unti 0068012

1 unit 1241272

1 unti 2488915

1 unti 1770951
Find the right consumables and accessories for your machine here.

With impeller Ø 22 mm for 3 multi-edge cutters. Well-suited for 45° chamfer.

With impeller Ø 29.6 mm for 3 multi-edge cutters. Well-suited for 30° chamfer.

With impeller Ø 22 mm for 3 multi-edge cutters. Well-suited for 60° chamfer.

Can be used to process steel up to 400 N/mm2. Well-suited for processing chamfers of 0°, 15° - 60° (in increments of 5°).

Can be used to process steel up to 400 N/mm2 and aluminum up to 250 N/mm2. Well-suited for a radius of 2 mm.

Can be used to process steel up to 400 N/mm2 and aluminum up to 250 N/mm2.

Can be used to process chromium steel up to 800 N/mm2. Well-suited for processing chamfers of 0°, 15° - 60° (in increments of 5°).

Can be used to process CR steel up to 800 N/mm2. Well-suited for a radius of 2 mm.

Can be used to process aluminum up to 250 N/mm2. Well-suited for processing chamfers of 0°, 15° - 60° (in increments of 5°).

Can be used to process steel up to 57,000. Well-suited for processing corner seam radius R2 PLUS and R4 PLUS.

Can be used to process steel up to 57,000 and aluminum up to 36,000. Well-suited for processing a radius of 0.157 in.

Can be used to process plasma application and steel up to 57,000. Well-suited for processing plasma radius of 0.12 in.

With impeller Ø 20 mm for 3 multi-edge cutters. Well-suited for a radius of 2, 3 and 4 mm.

With impeller for corner seam radius 2 mm, sheet thicknesses approx. 1.5 mm to 2.5 mm

With impeller for corner seam radius 4 mm, sheet thicknesses approx. 2.5 mm to 5 mm

With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Well-suited for 15° chamfer.

With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Well-suited for 20° chamfer.

With impeller Ø 29.6 x 11.6 mm for 3 multi-edge cutters. Well-suited for 55° chamfer.

With impeller Ø 29.6 x 12.3 mm for 3 multi-edge cutters. Well-suited for 35° chamfer.

With impeller Ø 29.6 x 12.3 mm for 3 multi-edge cutters. Well-suited for 40° chamfer.

With impeller Ø 22 x 12.5 mm for 3 multi-edge cutters. Well-suited for 50° chamfer.

With impeller Ø 22 x 12.5 mm for 3 multi-edge cutters. Well-suited for 55° chamfer.

With impeller for plasma application. Well-suited for radius 3 mm plasma.

Impeller for multi-edge cutter mount, corner seam radius R2 PLUS

Impeller specifically for multi-edge cutter mount, corner seam radius R4 PLUS

Impeller Ø 22 x 14.5 mm for thin sheet min. 0.7 mm . Well-suited for chamfers between 45° - 60°.

Can be used in tight spaces. For all multi-edge cutter mounts.


For low-scratch processing




For deburring

Ideal for processing small parts in stationary use


TruTool TKA 500 without tool
|
TruTool TKA 500 45° tool
| |
---|---|---|
Maximum chamfer lengths | ||
Maximum chamfer length, steel 400 N/mm² | 7 mm | 7 mm |
Maximum chamfer length, steel 600 N/mm² | 3.7 mm | 3.7 mm |
Maximum chamfer length, steel 800 N/mm² | 2.3 mm | 2.3 mm |
Maximum chamfer length, aluminum 250 N/mm² | 10 mm | 10 mm |
Maximum chamfer heights | ||
Maximum chamfer height, steel 400 N/mm² | 4.9 mm | 4.9 mm |
Maximum chamfer height, steel 600 N/mm² | 2.5 mm | 2.5 mm |
Maximum chamfer height, steel 800 N/mm² | 1.6 mm | 1.6 mm |
Maximum chamfer height, aluminum 250 N/mm² | 6.4 mm | 6.4 mm |
Radii | ||
Smallest inner radius | 18 mm | 18 mm |
Smallest bore hole (Ø) | 35 mm | 35 mm |
General | ||
Minimum sheet thickness | 0.7 mm | 0.7 mm |
Working speed | 3 m/min - 4 m/min | 3 m/min - 4 m/min |
Nominal input power | 1400 W | 1400 W |
Revolution speed during idle run | 8390 1/min | 8390 1/min |
Weight | ||
Weight without cable | 3.5 kg | 3.5 kg |
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.