For closing fan housings
You can easily process small radii wit the TruTool F 140 for fan housings. With this machine, you can achieve consistently high quality, even in stainless steel, from radii of just 4 inches. The sheet thickness range is between 0.25 inches and 0.05 inches for mild steel.
For processing fan housings with inner radii from 100 mm and outer radii from 300 mm.
For flange heights of 10 – 14 mm.
For closing Pittsburgh seams
On straight or curved ducts with flange heights of 8 mm – 14 mm and sheet thicknesses of 0.75 mm for mild steel and 0.6 mm for stainless steel.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unit 1763682
Find the right consumables and accessories for your machine here.
TruTool F 140 for a fan housing, long flange
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel up to 400 N/mm² (max.)||1.4 mm|
|Maximum sheet thickness, steel up to 600 N/mm² (max.)||0.6 mm|
|Flange height (B)|
|Flange height (B) with sheet thickness 0.6 - 1.0||10 - 14 mm|
|Flange height (B) with sheet thickness > 1.0 - 1.4||10 - 14 mm|
|Smallest inside radius (preformed)||300 mm|
|Smallest outside radius||100 mm|
|Lock seam elevation (H)||11 - 16 mm|
|Working Speed||6 m/min - 10 m/min|
|Nominal power consumption||550 W|
|Air gap (c)||5.5 mm|
|Weight without cable||4.2 kg|
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.