When processing sheet thicknesses of up to 0.04 inches, you can achieve optimum results with the die specifically designed for thin sheets.
The TruTool N 160 E is ideal for thin sheet applications in flat steel sheets and cuts up to a maximum of 0.06 inches in mild steel. You can use the optional extension to easily extend the range of applications at any time, including the processing of deep profiles like trapezoidal sheets. The machine can be turned in 3 directions using a rotating tool system.
The TruTool N 160 E stands out with its impressive price-performance ratio.
The cutting tool can be rotated in 3 steps of 90° without tools.
The machine sits comfortably in your hand and enables low-fatigue work.
You can change dies and punches quickly and without additional tools.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unit 2260177
1 unit 2260178
Find the right consumables and accessories for your machine here.
For processing steel 400 N/mm2 with sheet thickness 1 - 1.6 mm
Up to sheet thickness 1 mm
2 x punch and 1 x die
For profile sheets with a narrow profile opening
TruTool N 160 E
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel up to 400 N/mm²||1.6 mm|
|Maximum sheet thickness, steel up to 600 N/mm²||1 mm|
|Maximum sheet thickness, steel up to 800 N/mm²||0.7 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||2 mm|
|Smallest radius||40 mm|
|Working Speed||1.5 m/min|
|Stroke rate with nominal load||1600 RPM|
|Starting hole diameter||21 mm|
|Nominal power consumption||350 W|
|Weight without cable||1.7 kg|
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.