TruTool TKF 1101, dimensional drawing
The alternative for mild steel and aluminum
In contrast to the TruTool TKF 1100, the TKF 1101 is used for mild steel and aluminum applications. The gearbox, which has been specifically adapted for this area of application, increases the stroke rate and provides you with perfect chamfer quality. The machine can be positioned in the middle of the sheet. It is easy to apply weld seams to straight sheets, tubes, interior cutouts, and curved edges.
For mild steel and aluminum
The TruTool TKF 1101 was specially designed for use with mild steel and aluminum.
Ideal for areas with limited space
You can rotate the cutting direction by 90° to the right or left.
Rotating motor handle
Ideal for applications where the machine is tilted 90°.
The right setting
It is quick and easy to adjust the optimal settings for the chamfer height and sheet thickness.
For straight edges and radius edges
Weld seam preparation on outer and inner contours. With interior cutouts from 3.15 in. diameter and curved edges with radii from 1.57 in.
Tubes
Weld seam preparation on tubes with an inside diameter from 3.15 in.
The following consumables and the corresponding accessories are included in the scope of delivery.
Standard cutting tool (integrated)
Integrated
Roller holder complete, with supporting roller
1 unit 1299028
Bow-handle, complete
1 unit 1279590
Allen key DIN 911-5
1 unit 0067857
Punching and nibbling oil for steel, 17 oz
1 unit 0103387
Grease gun (filled with "G1") 2.5 oz
1 unit 1369906
Setting gauge
1 unit 1411767
TRUMPF Box L2
1 unti 1763686
Find the right consumables and accessories for your machine here.
Cutting tool
For processing mild steel between 300 - 500 N/mm2
Set of 2
1263021
Set of 10
1263029
Aluminum cutting tool
For processing aluminum between 200 - 400 N/mm2
Set of 2
1264419
High-tensile cutting tool
For processing mild steel between 500 - 700 N/mm2
Set of 2
1264417
Set of 10
1264418
High-tensile cutting tool 5575
For processing mild steel between 600 - 800 N/mm2
Set of 2
1327480
Set of 10
1327482
Heavy-duty cutting tool
For processing mild steel between 700 - 900 N/mm2
Set of 2
1264420
Set of 10
1264432
30° stripper
For 30° carrier
1 unit
1299027
37.5° stripper
For 37.5° carrier
1 unit
1299026
45° stripper
For 45° carrier
1 unit
1299025
Sliding sleeve
Set of 2
1311549
Support plate
1 unit
130881
Lower blank holder
1 unit
1297327
Wearing plate
1 unit
1297370
Set of 2
1311548
30° carrier
1 unit
1299041
37.5° carrier
1 unit
1299042
1 unit
1299042
45° carrier
1 unit
1299043
Punching and nibbling oil for steel
500 ml bottle
103387
Punching and nibbling oil for aluminum
1,000 ml bottle
125874
Work station with pedestal
Ideal for processing small parts in stationary use
1 unit
1313496
Work station
Ideal for processing small parts in stationary use
1 unit
1300382
Pedestal
Pedestal for work station
1 unit
3677
TRUMPF Box L2
1 unit
1763686
TruTool TKF 1101 30° bevel angle
|
TruTool TKF 1101 37.5° bevel angle
|
TruTool TKF 1101 45° bevel angle
| |
|---|---|---|---|
| Maximum chamfer lengths | |||
| Max. chamfer length, steel 400 N/mm² | 11 mm | 11 mm | 11 mm |
| Max. chamfer length, steel 600 N/mm² | 9 mm | 9 mm | 9 mm |
| Max. chamfer length, steel 800 N/mm² | 6 mm | 6 mm | 6 mm |
| Radii | |||
| Smallest radius | 40 mm | 40 mm | 40 mm |
| General | |||
| Working Speed | 2 m/min | 2 m/min | 2 m/min |
| Stroke rate with nominal load | 340 / 440 1/min | 340 / 440 1/min | 340 / 440 1/min |
| Nominal power consumption | 1600 W | 1600 W | 1600 W |
| Sheet Thickness | 3 mm - 25 mm | 3 mm - 25 mm | 3 mm - 25 mm |
| Weight | |||
| Weight without cable | 10 kg | 10 kg | 10 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
