TruTool N 1000, dimensional drawing
Powerful heavy-duty machine
The TruTool N 1000 has been specifically designed for use with thick sheets. It is well-suited in particular to use for dismantling tanks and containers. It cuts through doubled sheets as well as bends of up to 90°. You can use the TruTool N 1000 for nibbling through sheet thicknesses of up to 0.4 in. without feed force. It offers non-fatigue operation despite a machine weight of 32.4 lbs. The handle can be rotated through 180°, providing perfect guidance of the machine.
Perfect cuts with 2-speed motor
Choose the right speed for the material thickness, strength, and type of workpiece.
4 cutting directions
The machine can be turned through 360° in 4 steps of 90°.
Rectangular punch with flexibility for profiles
Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.
A powerful 2600 watts
Powerful motor and sophisticated gear technology. For outstanding ability to handle continuous loads.
Flat sheet
For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.
Profiles
For cutting profiles, cuts across edges and weld seams, as well as for dismantling tanks and containers.
Coil processing
For cutting coils, relief cuts, and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.
Standard punch
1 unti 2260113
Die 10 (integrated)
1 unti 1884904
Handle
1 unti 0103555
Allen key DIN 911-12
1 unti 0067920
Tube of grease "S1", 25 g
1 unti 0121486
Tube of grease "S1", 250 g
1 unti 0385478
Punching and nibbling oil for steel, 500 ml
1 unti 0103387
Setting gauge
1 unti 1411767
Case
1 unit case 2277078
Find the right consumables and accessories for your machine here.
Standard punch
For processing aluminum and mild steel 400 N/mm2
1 unit
2260113
Set of 2
1264155
Set of 5
1264156
Punch CR
For processing stainless steel 600 N/mm2 and 800 N/mm2
1 unit
2260114
Set of 2
1264412
Set of 5
1264413
Die P10
Well-suited for processing profile sheets from 7 - 10 mm
1 unit
1884903
Set of 2
1264185
Die No. 5
For processing aluminum, mild steel, and stainless steel 800 N/mm2 up to 5 mm
1 unit
1884909
Die No. 7
For processing aluminum, mild steel, and stainless steel 600 N/mm2 from 5 - 7 mm
1 unit
1884905
Set of 2
1264184
Die No. 10
For processing aluminum and mild steel from 7 - 10 mm
1 unit
1884904
Set of 2
1264177
Punch guide
1 unit
1884906
Set of 2
1264368
Wearing plate
Protects the die holder against excessive wear
Set of 2
1264375
Set of 5
1264376
Chip bag
To collect chips
1 unit
115215
Punching and nibbling oil for steel
500 ml bottle
103387
Punching and nibbling oil for aluminum
1,000 ml bottle
125874
Case
1 unit
121585
TruTool N 1000 1st speed
|
TruTool N 1000 2nd speed
| |
|---|---|---|
| Maximum sheet thicknesses | ||
| Maximum sheet thickness, steel up to 400 N/mm² | 10 mm | 8 mm |
| Maximum sheet thickness, steel up to 600 N/mm² | 7 mm | 5 mm |
| Maximum sheet thickness, steel up to 800 N/mm² | 5 mm | 4 mm |
| Maximum sheet thickness, aluminum up to 250 N/mm² | 12 mm | 10 mm |
| Radii | ||
| Smallest radius | 300 mm | 300 mm |
| General | ||
| Working Speed | 1 m/min | 1.6 m/min |
| Stroke rate with nominal load | 230 RPM | 370 RPM |
| Starting hole diameter | 75 mm | 75 mm |
| Nominal power consumption | 2600 W | 2600 W |
| Weight | ||
| Weight without cable | 14.7 kg | 14.7 kg |
PDF <1MB
Technical data sheet
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.
