TruMicro Series 6000, product image
TruMicro Series 6000, product image
Short and ultrashort pulse lasers

TruMicro Series 6000

Powerful, compact, flexible

Satisfying the most demanding requirements, even in series

Thanks to slab technology, the ultrashort pulse lasers of the TruMicro Series 6000 generate laser pulses which can be linearly amplified to very high pulse energies. As the parameters can be selected with great flexibility, even demanding processes can be optimally realized. Smoothly implement the high-quality and stable lasers of the TruMicro Series 6000 in your batch production, for example in Consumer Electronics, to cut glass or separate flexible printed circuit boards.

Flexibility of parameters

Individually combine demanding parameters such as high pulse energies with ultrashort pulse duration.

Strong performance

The ultrashort pulse lasers generate high average power due to high pulse energies.

Great range of material

Whether IR, green or UV – selecting the correct wavelength means the most varied of materials can be processed in the best possible way.

Excellent quality

With the TruMicro Series 6000, you will receive industrial, high-quality series products based on established components.

High process stability

The internal power control ensures stable output parameters and a homogeneous process result.

Highly dynamic cutting with TOP Cleave

Laser cutting of glass

When laser cutting glass, the mechanical load of the material is reduced to a minimum with a TruMicro ultrashort pulse laser – there are no cracks at the edges, which means that the cut components no longer need to be smoothed down. In the display industry in particular, chemically hardened glass is used as durable protective glass and carrier substrate, and must be cut.

PCB drilling made easy

Printed circuit boards are designed with multiple layers and are therefore particularly compact. Holes lined with copper connect the traces between the levels. Here, the drilled holes often have a diameter of less than 100 μm. Ultrashort pulse lasers take care of this task in just one operation. The high available peak pulse powers enable the desired geometry and quality to be achieved, combined with extremely high productivity.

TruMicro 6020
TruMicro 6320
Laser parameters   
Average output power 200 W 30 W
Beam quality (M²) < 1.3 , optional  M² < 1.2 < 1.3 , optional  M² < 1.2
Wavelength 1030 nm 343 nm
Pulse duration < 850 fs or
< 5 ps
< 500 fs or
< 850 fs
Maximum pulse energy 200 µJ for 1 MHz or
2 mJ with 100 kHz
37.5 µJ with 800 kHz
Maximum repetition rate 50000 kHz QCW mode 2000 kHz
Structural design   
Dimensions of laser head (W x H x D) 600 mm x 366 mm x 735 mm 600 mm x 366 mm x 735 mm
Dimensions of supply unit (W x H x D) 446 mm x 915 mm x 725 mm 446 mm x 915 mm x 725 mm
Ambient temperature 15 °C - 35 °C 15 °C - 35 °C


TruControl is the quick and easy-to-use control for TRUMPF solid-state lasers. It regulates the laser power in real time in order to deliver reproducible results. TruControl manages, controls, and visualizes the interface configuration. You benefit from a uniform control architecture across all laser technologies. The lasers have interfaces to control intelligent TRUMPF optics, such as monitored CFO focusing optics or PFO scanner optics. You can easily program the processing optics via the laser control system. The remote support service provided by TRUMPF means that you receive off-site support within seconds. This will allow you to avoid service calls or be as prepared as possible and increase the availability of the laser device.

Advanced Pulse on Demand

The precise time definition of the individual laser pulses is relevant for an optimum process result. The exact time and pulse energy per individual pulse can be set due to the linear slab amplification. Particularly in combination with a scanner, this function can provide equidistant pulses on the workpiece even in the case of acceleration or deceleration.

Remote Services

In the event of an error, TRUMPF service experts will remotely access your laser via a secure remote connection. In many cases the fault can be remedied directly in this way, or the configuration of the laser can be modified in a way that permits you to continue manufacturing until the spare part arrives.

Interface variety – for simple integration

Interfaces are key for the integration of a TruMicro laser into your machine or production line. The solid-state lasers from TRUMPF offer interfaces to all common fieldbus systems. Also available: real-time interface, parallel digital I/O, interface for process sensor systems, OPC UA software interface, analog input board, interface for intelligent TRUMPF optics (CFO, PFO).

TOP Cleave cutting optics

The TOP Cleave focusing optics are processing optics for quickly cutting transparent materials such as glass or sapphire.

TOP Cleave optics, high-speed laser cutting of glass
TOP Cleave

High-speed laser cutting of glass

TOP Weld processing optics

The innovative processing optics for welding transparent materials without intermediate layers.

TOP Weld

Welding glass or glass to metal without intermediate layers.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Laser Technology Sales
Service & contact