We use cookies for the provision and functionality of this website. If you agree that we can use cookies for other purposes please click here. Information on deactivating cookies and data protection
TruLaser Cell 5030
New
TruLaser Cell 5030
3D laser cutting machines

TruLaser Cell 5030

The perfect introduction to 3D laser cutting

The perfect entry-level machine for flexible 2D and 3D laser cutting

Superb economy: The TruLaser Cell 5030 impresses with its low hourly operating cost. It is ideally suited to small and medium lot sizes and for applications where components are frequently changed. It comes with an energy-efficient, low-maintenance TruDisk solid-state laser as well as a wealth of functions from the tried-and-tested TruLaser Cell product groups. As such, the TruLaser Cell 5030 is the ideal introduction to flexible 2D and 3D laser cutting.

Excellent value for money

The TruLaser Cell 5030 doesn't just mean lower investment costs, it is also very economical when in operation.

30% less space required

The use of flying optics means the component stays in its spot. As a result, less space is required to set up the machine.

Dynamic and precise

The flying optics ensure high-quality results and exceptional productivity.

20% lower operating costs

With the energy-efficient, low-maintenance TruDisk laser, you can cut more economically than ever before.

Reliable and quick

Highlights include the magnetic coupling for the cutting optics and the fast sliding doors on the front.

Easy to use

The teachbox and touchscreen enable you to run in components easily. The TruTops Cell Basic software solution also enables you to make quick adjustments to programs directly at the machine.

See for yourself how you can benefit from the TruLaser Cell 5030 for small to medium lot sizes!
A wealth of useful functions make it easier than ever to get started in the world of flexible 2D and 3D laser cutting.
- / -
TruDisk, maximum performance from the disk
Lasers and laser systems – a perfect pair at TRUMPF

The TruLaser Cell 5030 is the perfect match for the TRUMPF TruDisk solid state laser. Due to its outstanding beam quality, the solid-state laser is ideally suited to the typical cutting applications performed using the TruLaser Cell. You benefit not only from significantly higher cutting speeds, but also greater productivity.

TruLaser Cell 5030 Innenraum
Reliable, robust machine solution

The magnetic coupling minimizes mechanical damage to the machine, and you can continue working quickly and precisely in the event of a collision, without the need for a service technician. The X-Blast technology, which ensures a greater distance between the nozzle and sheet metal, offers exceptional process reliability together with unprecedented quality when processing 3D components.

Lasergeschnittene Heckklappe
Low-cost production

With the new 3D laser cutting machine from TRUMPF, you can reduce the hourly operating cost by up to 20% compared to hybrid and sheet-mover machines. The energy-efficient, low-maintenance TruDisk laser enables significant improvements in energy efficiency during production, without compromising on cutting speed and therefore productivity. What's more, the TruLaser Cell 5030 fits within the width of a typical hybrid system and therefore saves a third of the space that was previously required. This means you can free up precious space in your production hall.

Laser-cut tailgate

Laser-cut tailgate

Cutting automotive body parts requires utmost flexibility and the ability to make changes quickly and easily. With the TruLaser Cell 5030 you can process all materials that are typically used here, from aluminum alloys to state-of-the-art steel alloys.

Laser-cut bearing cage

Laser-cut bearing cage

With the TruLaser Cell 5030 you benefit from an affordable machine solution for accurately cutting components to the highest standards.

Laser-cut vehicle rear seat

The TruLaser Cell 5030 enables not only openings in but also trimming of the deep-drawn component. Whereas small volumes are often too expensive to process using conventional punching tools, with the TruLaser Cell 5030 you can cut all of the required contours fast, reducing production costs.

- / -
TruLaser Cell 5030
Axis travel range  
X axis travel range 3000 mm
Y axis travel range 1500 mm
Z axis travel range 700 mm
B axis travel range ± 135 °
C axis travel range n x 360 °
Maximum workpiece size  
Maximum workpiece size in X 2540 mm
Maximum workpiece size in Y 1040 mm
Maximum workpiece size in Z 470 mm
Maximum axis speeds  
Maximum axis speed, axially parallel in X 60 m/min
Maximum axis speed, axially parallel in Y 60 m/min
Maximum axis speed, axially parallel in Z 60 m/min
Maximum axis speed, simultaneous 104 m/min
Maximum axis speed of B axis 60 1/min
Maximum axis speed of C axis 60 1/min
Maximum axis accelerations  
Maximum axis acceleration, axially parallel in X 5 m/s²
Maximum axis acceleration, axially parallel in Y 5 m/s²
Maximum axis acceleration, axially parallel in Z 5 m/s²
Maximum axis acceleration, simultaneous 8 m/s²
Maximum axis acceleration of B axis 200 rad/s²
Maximum axis acceleration of C axis 100 rad/s²
Positioning accuracy  
Positioning accuracy of linear axes (X, Y, Z) 0.08 mm
Positioning accuracy of rotary axes (B) 0.015 °
Laser  
Maximum laser power 2000 W - 3000 W
Available lasers TruDisk
PDF <1MB
Technical data sheet

The technical data of all product versions as a download.

FocusLine

FocusLine enables the program-controlled setting of the focal position depending on the type of material and the material thickness. The position is adjusted using a mirror subject to air pressure, influencing the curvature of its surface.

Smart Optics Setup

Smart Optics Setup is a fixture attached to the machine base unit which cuts test sheets and readjusts the machine. Implementation is even easier due to standardized macros, saving time and money.

TruLaser Cell 5030 Innenraum
Extended range of travel

As an option, the working range of the basic machine can be increased by 300 mm to the right. This improves the usable 3D working range and access to the machine from the front when loading and unloading large components.

TruTops Cell Basic
TruTops Cell Basic

TruTops Cell Basic enables you to adjust programs more easily, more quickly, and more reliably directly at the machine. Navigating within the NC program is incredibly simple, as the contour to be changed with the corresponding NC text can be selected by a simple click of the mouse. All changes made are visualized immediately and ensure unprecedented reliability when working in the program.

Rotary axis

Due to the rotary axis, rotationally symmetrical parts can also be processed. The additional axis can be mounted both horizontally and vertically on the work table. An end support is available to help process longer tubes and profiles.

TruTops Cell

TruTops Cell provides you with everything you need for the convenient programming of your 3D laser processing – no matter whether this is the programming of laser cutting, laser welding, or laser metal deposition programs. It loads 3D CAD data via numerous interfaces, and corrects it if required. The system automatically creates cutting suggestions in all three dimensions. It also automatically suggests devices.

TruTops Boost

The TruTops Boost all-in-one solution enables you to cover multiple process steps and work consistently. All the steps in an order are included, from the 3D part through to the finished NC program for bending, punching, and laser programs. At the same time, the software takes into account the dependencies between the bending and cutting technologies, as well as the design and ensures a fast production process. The result is integrated software with combined intelligence – ensuring that the software and machine are perfectly coordinated.

Visual Online Support (VOS)

Resolve even the most complex issues via the app – without the need for on-site deployment. Visual Online Support (VOS) enables you to exchange image, audio, and video files conveniently, quickly, and reliably, and thus avoid long machine downtimes.

Depending on the application, you select the perfect laser for your needs and combine this with the TruLaser Cell 5030. This ensures you always have the perfect complete solution for you, regardless of your investment or industry or the volume being produced.

This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.

You may also find these topics interesting

Contact

Downloads

Brochure
Brochure - Laser Systems
Brochure - Laser Systems
pdf - 1 MB
Service & contact