The TruTool N 500 offers unique versatility. Since you can cut in four directions, even backwards, you can dismantle tanks and containers, and process coils and workpieces with bends of up to 90°. The machine is also well-suited to cutting high-tensile materials. The optimal weight/performance ratio of 8.8 lbs. against a sheet thickness of 0.2 in. is particularly impressive.
The machine can be turned through 360° in 4 steps of 90°.
Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.
You work without feed force and, therefore, required force is reduced to a minimum.
You can use the speed controller to adjust the working speed to suit the individual cutting task (not available für the US version).
For cutting straight sheets and trimming them to length. For notches, as well as radial and interior cutouts.
For cutting profiles, cuts across edges and weld seams, as well as for dismantling tanks and containers.
For cutting coils. For relief cuts and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.
1 unit 2260199
1 unit 1884930
1 unit 0974659
1 unit 0067849
1 unit 0344969
1 unit 1770951
Find the right consumables and accessories for your machine here.
For profile sheets 3 - 5 mm
For flat sheets up to 3.2 mm and profile sheets up to 2 mm
For sheet thicknesses up to 2 mm in mild steel and stainless steel
For sheet thicknesses up to 3.2 mm in mild steel and stainless steel. Profile sheets up to 2 mm.
For sheet thicknesses up to 5 mm in mild steel. Profile sheets up to 3 mm.
Particularly well-suited to profile sheets 3 - 5 mm
To collect chips
2 x punch 5 / P5 and 1 x die No. 5
2 x punch 5 / P5 and 1 x die P5
TruTool N 500
|Maximum sheet thicknesses|
|Maximum sheet thickness, steel up to 400 N/mm²||5 mm|
|Maximum sheet thickness, steel up to 600 N/mm²||3.2 mm|
|Maximum sheet thickness, steel up to 800 N/mm²||2.5 mm|
|Maximum sheet thickness, aluminum up to 250 N/mm²||7 mm|
|Smallest radius||90 mm|
|Working Speed||1.5 m/min|
|Stroke rate with nominal load||720 RPM|
|Starting hole diameter||41 mm|
|Nominal power consumption||1400 W|
|Weight without cable||4 kg|
The technical data of all product versions as a download.
This product range and information may vary depending on the country. Subject to changes to technology, equipment, price, and range of accessories. Please get in touch with your local contact person to find out whether the product is available in your country.