Country/region and language selection

Highspeed Eco – The Game Changer. More throughput, lower consumption

How do you win a race? You skip the pit stops! Laser cutting is like racing – a good machine must be coordinated so that it reaches the target without manual readjustment. With the Highspeed Eco cutting procedure, you can set speed records for nitrogen cutting with solid-state lasers. This is because, depending on the sheet thickness, the sheet throughput is increased by up to 100% with consistent laser power. In addition, you reduce the cutting gas consumption by 70%.

This is how Highspeed Eco makes you better

The kW figure and the machines must be suited to one another

The power that the car effectively transfers to the road is important in a motor race. The same applies to laser cutting – only a carefully thought-out machine concept, where all components are coordinated with one another, allows the laser and machine to apply the full power to the sheet metal. The machine, laser, and functions are ideally suited to one another at TRUMPF. Not least because we develop and install all of the components in our machine ourselves.

More throughput*
Lower cutting gas consumption*
Lower cutting gas pressure*

* The figures are average values from older machine generations with standard cutting data and relate to a typical sheet mix composed of simple, average and complex parts with various sheet thicknesses. We would be happy to test your individual parts as part of a time study.

The default nozzle and touchdown nozzle compared:

Comparative graphic, Highspeed Eco cutting process

Default: The distance between the nozzle and the sheet metal leads to loss of cutting gas. High gas pressures are necessary to push slag out of the kerf.

Touchdown nozzle: The flow-optimized nozzle design is patented. The sleeve, which can be mounted in a flexible manner, is pressed onto the sheet metal when cutting and seals the kerf. Gas loss is minimal, and the gas pressure and consumption are significantly reduced.

One nozzle for the entire range of applications

Uneven terrain? No problem!

The sleeve can be moved and tilted, and the distance between the inner part and the sheet is very large. The sleeve thus glides easily over large piercing spatter residue on the sheet metal. The spatter residue can be removed easily at the same time.

Like in a wind tunnel – optimized aerodynamics

The sleeve seals the kerf. The cutting gas is therefore blown parallel and with greater efficiency into the kerf resulting in reduced burr formation and slag residues. The feed rate can therefore be dramatically increased and the approach length shortened – without affecting quality.

Detailed images of the Highspeed Eco

Cutting head with Highspeed Eco cutting process nozzle

Crank up your speed while saving on gas

The touchdown nozzle prevents the lateral escape of gas and thus saves you money.

Action shot of Highspeed Eco cutting process

Amazingly fast through the sheet metal

In comparison with older machine generations with standard cutting data, you benefit from a feed rate during fusion cutting with the Highspeed Eco that is sometimes twice as high.

2D laser cutting machines

Image of the technology inside the 2D laser cutting machines

Our portfolio has the right machine for every requirement - your application is the key factor determining which laser processing machine is the right one for you. However, we don't just focus on cutting times: we also strive to optimize upstream and downstream laser cutting processes.

Find out more

You can find out more in the following videos

Highspeed Eco: Extremely fast. Extremely economical.

Highspeed Eco: Function film for the touchdown nozzle

We would be pleased to advise you!

Switch now and take pole position when laser cutting with Highspeed Eco.

Request consultation

Downloads

Highspeed Eco Flyer
Highspeed Eco Flyer

You may also find these topics interesting

Image of the technology inside the 2D laser cutting machines
Laser cutting machines

Regardless of whether you need a CO2 or solid-state laser, we can offer the perfect 2D laser cutting machine to meet any requirement and can provide the ideal solution for any sheet metal type.

Key visual of TRUMPF Services Genuine Parts
Genuine parts

Quality guaranteed: TRUMPF genuine parts, tailored to your products, give you peace of mind.

Laser cutting with TRUMPF products
Laser cutting

Lasers enable you to master a range of different cutting tasks: From producing kerfs in semi-conductor chips with micrometer precision, to quality cuts in 1 1/4 in.-thick steel sheet.